General Discussions - 300ZX Related

Hi is there a supplier that anyone knows of that does a good deal on either replacing the Plastic windows in a convertible hood or alternatively a complete replacement hood. If anyone knows a reliable supplier that discounts to club members that would be even better Thanks for any info Best Regards Marc

I've just fitted bigger smic's, the original air ducts will fit back on. Will they help with the flow of air or restrict it as obviously they're much smaller? Should I leave them off? Thanks.

Browsing through the internet and came across another members Z ! https://www.endurancewarranty.com/learning-center/shoptalk/rewind/nissan-300zx-new-era-classic/

Hope this is ok did anyone one here buy a set of apexi exhaust of me 1.5 years ago as I want them to go to the owner and i cant for the life of me rember there name as iv sold the zed

Having just spent a King's ransom on my car over the last year I'm damned if I'm going to let something as trivial as winter stop me from enjoying Nissan's finest !! That and the fact that my Mrs said if i wasn't going to actually drive it then what the hell was the point and I could forget about using her car now mine is sorted !!! However something that is cramping my pleasure is the legendary appalling headlights !! I'd be grateful to get any recommendations on the best bulbs I can use. It's a '95 TT JDM. Dipped beam, high beam etc please. I'm hoping that the latest possibilities available are a considerable improvement. Much appreciated guys. Just out i…

Ive never actually posted any info on my car before only constant problems I've had, it has spent the last year off the road more than on the road anyway here she is, Japanese Import 1995 Non Turbo Auto converted to Manual Purchased in 2016 from Kent. Imported into UK in 2007

This looks like your Z JP with them wheels and the black roof bars :)

Hi All, does anybody know if the radiators for NA Auto and Manual are the same? Thanks

Hi everyone I have an issue with my 300 that is causing me a bit of a headache my car is a 3.0 v6 non turbo auto. When accelerating from a stand still the engine hesaties for a couple of seconds as if it was going to stall then it goes as it should I have been trying to find the issue for a few months now and it still doing it. One thing that I noticed is when the car is on idle the sound comeing out of the drivers side exhaust is normal but the sound comeing out of the passenger side exhaust sound very different its popping and banging. Can any one shed any light on why it's doing that or what could be causing it. Also one other strange thing is the e…

Hello guys,i am looking to replace all the small Vacuum Hose,(AIV solenoid,EGR solenoid,etc)my question is what sizes do i need and what lenths do i need to replace all,Thanks guys https://imgur.com/a/vqaDuKt https://imgur.com/a/XuPWVrT

If this is in the wrong place , feel free to move, As above I am giving away x 2 Conti Sport Contact 3 Tyre's in mint condition and at least 6 mm of tread probably more, they really are like new, they have just turned 7 years old so I wont use them on a track or dragstrip, (they are on the front of my Nissan). Size = 235, 45 , 17 High speed rating. If you want them Text me using 07929 159828, they will be ready for collection from tomorrow morning. Wolverhampton Area. Sayers

Evening all. I recently acquired a new cluster, which was advertised as some sort of UK/JDM hybrid. Now it has a UK speedometer, but what i want to know is if the odometer will read in miles or kilometres. So, question the is, is there anyway to tell by looking at the cluster, whether it will count in miles or KM's? I've taken some pictures of the odometer on the off chance this will help answer my question. Thank.

Quick question guys what would this engine oil be like in my 300zx tt? https://www.micksgarage.com/d/engine-oils-and-lubricants/products/1457479/castrol-gtx-10w40-a3-b4-semi-synthetic-engine-oil-4-litre

So most of us have our Z's of the road this time of year so what's the latest update of your garaged Z? Mine is sorned and covered but still work going on in the winter service. A few weeks ago the spark plugs oil oil filter and air filter were changed. Need to take the wheels of next and give them a good clean and while they are of clean the inside of the wheel arches. Then its wax on time and show ready for 2019.

Guys quick question,i was just wondering have you guys treated the chassis on your cars,Was thinking of doing or getting it done,If so what did you guys use?(Mine was brought in from japan in 2007),Any info would be great.Thanks all:confused1::confused1::confused1:

is there a difference for this part between turbo and non turbo? thanks

Hi All Just a quick question really, is there any way to tell if I have the Bose speakers in my car just by visually looking or is the only way to remove the door cards? My car is a jap import and a 1990 if that helps in any way Thanks all, Luke

Current Coil packs are old, what constitutes an upgrade these days, looking for plug and play, Ta Sayers

Hey everyone, I thought you all might get a kick out this abomination 300ZX which is going to be featured on "Wrench Everyday"'s YouTube channel. Anyways if you want to know the short of the video, a YouTuber named Tavarish who has a few project cars he features rebuilds on, including a a and a just to know a few, has just purchased for his second more budget friendly YouTube channel "Wrenches Everyday" a sad looking 300zx with a twist, its a VH45 powered 300zx but this car is a total mess, the original owner sold the car for $1500 USD as an unfinished project car which the owner was planning to install a diesel turbo onto his VH45 swap and then ma…

I was thinking this week how it might look putting some exhaust tips like with a nice more agressive fresh modern look to the Z. I haven´t found much pics or examples ...have anyone ever fitted some tips ike black aluminum? thinking how it would look on the green cobalt.

https://www.ebay.co.uk/itm/1995-NISSAN-300ZX-300-ZX-3-0-TWIN-TURBO-ENGINE-81-302-MILES/401688758259?hash=item5d868407f3:g:-6kAAOSwT2hcQPcA

Hi folks, Just a quickie - to save me removing a wheel and measuring, or digging out spigot rings - can someone please tell me the diameter of the hub centre bore, which the OEM wheel would mount on? I had in my head a smaller measurement of 59.4mm - but I remember reading 66.1mm somewhere too!! Richard

Any idea how they are mounted from the factory?I guess the long black metal strip goes behind the bumper and using 3 bolts you fix the license plate support.I think I am missing the side bolts from the metal strip,but I have no idea if they are the same as the middle one.

Guys just a quick question,what is the best car cover for a 300zx tt,also what size should i need,Thanks all

Parked mine up for the winter having done around 10,000 miles in it last year and time to sort some niggles ready for when she comes out again in the spring time. I had a Water system issue with the car last year, it was forcing Water out of a little heater pipe join right against the bulk head, right at the top behind the engine. I replaced the hose and the metal joining piece and no more water was coming out of there and I continued to use the car. The car however did still always smell hot after that and did always smell a bit of burning coolant at the end of the journey although the temp goes up and down as it should and always has done. What I found is tha…