General Discussions - 300ZX Related

I found this how-to http://www.ttzd.com/tech/fuelfiltertech.html ConZult has a fuel pressure release button - if I use that, do I need to do the remove fuse / crank engine to release fuel pressure as in the how-to, or will using the ConZult fuel pressure release be enough? Thanks.

Hi Guys I am trying to fit aftermarket steering wheels to 2 Z's one I have completed and the other I am struggling with. Both are are fitted with OE Airbag Steering wheels but the wiring and the Airbag are totally different I have used the search on here but can not find any details so apologies if all this has been covered before. The following Photo's are from the 1994 car with no hicas and drivers only Airbag After much testing & faffing about these are the connections that need to be made for the Airbag Light to extinguish (Red wire Loop) and the connection for the Horn button (Green Wire) The Following Photo's are from the 1992 Convertible w…

hi i bought the braided oil and water lines kit ,the kit comes with a 1mm oil feed adapter/restrictor do i need to use it ? there just bog standard manual rebuilt turbo's cheers any help appreciated

Got these a year back, will they fit as last time I asked garage to change them they said the fitting was not possible. As I am changing my front discs & new pads I thought it a good idea to change these too?

http://www.msn.com/en-gb/cars/news/10-japanese-youngtimers-that-are-hot-right-now/ss-BBUVzSt?ocid=ientp_edu#image=8 Pity the 300zx is overlooked by most buyers but maybe that could work for us..

Ok all, Having bought a pair of 350Z Brembo front brake calipers from Mondo a while back, it seems I f**ked up when fitting them & threaded one of the calipers when fitting the new HEL brake lines. Mike Sandford @ Outlaw Customs has tried tapping them but with little success leaving only a couple of threads to grip on. So looking for recommendations for who can sort this problem out?....... Anyone?... Please? Help me....

Anyone know what these are for? The black ones seem to be in with the heating ducts wires, or nearby anyway, but can't see anywhere they'd plug into. The white one, is the right one I have hold of. Finally, there's a clutch switch. But there's no connector on my loom. I'm guessing this was due to it being a manual conversion in years gone by and that I don't need to care?

Apart from the below photo, I'm wondering if anyone has a photo of all the heating pipework that sits behind the dash. And if possible, a list of the codes on them so I can see if I have it all

My son was reading an artical on the internet about the 300zx when he said to me "is that your Z" and it was :) Cant remember giving permission to use one of my pics but glad to see it. Scroll down till you see a red swb outside the Belfast office of the plane makers Bombardier https://www.automobilemag.com/news/market-watch-1990-1996-nissan-300zx-z32/

I might need new injectors. When I had a different idle issue in 2010, I got a set of 6 Deatschwerks remanufactured from ConceptZ at $365 for 6 $61 each. These are still available at $529 / $88. SO I had a look round and there are others down to around $62 for AUD remanufactured. Then I looked on Ebay and found https://www.ebay.co.uk/itm/6x-NISSAN-300ZX-FAIRLADY-INFINITY-J30-MAXIMA-SENTRA-26lb-270cc-FUEL-INJECTORS/222825765310?fits=Plat_Gen%3AZ32&hash=item33e17359be:g:40IAAOSwOn1aeGPN which claim to be new JECS for £89 for all 6! If something looks cheap, it often is - has anyone had any experience with these? Cheers

Managed to lose a set of keys, I think by locking them in the boot. Any ways to get a z32 open? Really struggling! Car is locked and think I may rather stupidly have left spares in the car. :( Thanks in advance!

hi hope someone can help.i need to know if tt head gaskets are the same as non turbo head gaskets. thanks trev

300zx :: 2019 Nissan VG30DETT (2019-03-10 14:48:19)

Hi folks, My Mongoose exhaust is beginning to look a little (well) untidy - so after having the Zed resprayed I was thinking of getting a new one. I can't seem to find Mongoose or Scorpion still listing the Z32 fitment though. I see Luke has a cat-back system, but don't really like the "rolled-out" appearance of the tail pipes. That just doesn't suit the Zed IMO. I have found this on Ebay though - looks like the old Japspeed system, just more expensive :lol: https://www.ebay.co.uk/itm/Catback-Exhaust-System-For-90-95-Nissan-300ZX-Z32-2-2-Seater/283403257363?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160727114228%26meid%3D7c715805e2f8407db6…

Just got back from seeing Keith & my newly painted slicktop. What a transformation! The paint work previously was pretty bad but solid so I really didn't expect it to look as good as it does but hes done an amazing job. Can't wait to pick it up next weekend.

Ive just started my 300zx tt first time in about 6 months when idling no smoke after running for about 30 minutes i gave engine a bit of a rev blue smoke left hand exhaust but does not smoke on idle any ideas thanks

Hi i think ive got a leaking rocker cover no oil on floor but smoke coming from the rear of the engine smells like burning oil how much roughly pay to have all four rocker/ cam cover gaskets / reseal at the same time get deletes done or should I tackle this at home as i would like to get rocker covers an plenum Powder coated why stripped down thanks

Taking the Z to Bordeaux for Easter weekend. Thinking of night driving do I need headlight adjustment stickers? Art

Does anyone have the evo 8 brembos on 350mm disks? I need to know what braided lines to use on this setup please, front and rear. Are there stock lines from another model I can use or will I have to have them specially made/adapted? Thanks Sent from my SM-N920C using Tapatalk

Hi since I smashed up my beautiful Green 1995 300, I have been driving my older 300 most of the time being my only car, I had to take it off the road yesterday fo some major needed repairs. Lucky I still have the use of my brothers 911, seeing he is still living in Hong Kong. I am so embarrassed at how I have neglected my car, but only doing 1 - 2 thousand miles a year and having a bad back (no excuse really) it is now time to sort everything out before the next MOT. Having sold most of the parts I had collected, I have been getting ready with the long list of parts I now need, how the prices have gone up, can’t really believe it. Started stripping her…

Nissy Nora :: 1993 Nissan 300ZX (2019-03-04 22:11:36)

hey guys, Who's the best to go to for a cam belt change around Bedfordshire, Hertfordshire, bucks? only done around 5k since Jeff did it but that was changed 5 years ago now so I'm guessing it would still need changing.

2019 Nissan 300ZX (2019-03-04 20:44:34)

If got a misfire under load Rev counter bouncing any idea people

Do insurers keep a record of declared mods on a car? I ask this questions because if I was to use the same insurer as the previous owner then I would expect the insurer to be able to advise me if there were mods that they thought were fitted that I might not spot. (at least all declared ones) any undeclared ones that I knew about from a sale I would declare or remove as I just don't want to risk things. As so many of these cars have some kind of mods now I just want to know the best route to take. What I really don't want to happen is to get insured and then for it to turn out that there is a mod that I was not aware of that the previous owner may not have declared or …