General Discussions - 300ZX Related

right i have now bought new disc and front pads for her and am going to attemp to do it myself tomorow, any helpful hints dos and donts. i have mycopper ease aswell. cheers

Hi guys i have a quick question about buying a used ECU,Does the ECU have to be programmed at all seeing it is from another car?Anyone have a spare one for sale or where is the best place to buy one.Thanks all

Hey trying to order brakes for my 91 jdm non turbo . And everywhere I look are all coming up as twin turbo . And 30 ml front disc . Are these suitable for my car or were i get non turbo replacement . My front calibers are as follows ... State nissan . And (4) and also the name sumi***** something lol . Any help be great

Anyone have an arch rolling tool in west mids or Lincoln areas that they don't want or will lend me? Thanks :)

Hi guys, Hopefully I'll not have to bother you all too much on here over the next few days as my mechanic has collected the car and gearbox conversion kit (thanks Keith) so by Monday, Ill have a very nice na manual to drive with all done, bodywork completed and ready to put some mileage on it. It was getting some stares over last weekend about town, as the younger boy racers hadn't seen one before, hehe.

I have a wings west front bumper sat in the garage, its been there a while and quite honestly it'll never get fitted so I'm thinking, should I get rid. Anyway, what do you lot think its worth? Its a fiberglass one that's never been fitted. Thanks Lee

Can't believe the attention this got parked outside the unit, people just love it! Followed by another!-check that under the hood..............:drool:

as you know I have just finished refurbing my rear sub frame am now doing the front sub what I want to know is what bushes do you need I used e.s bushing in the rear sub I so what bushes and ball joinst can you buy I see I can get the steering rack bushes and role bar bushes what other bushes are there to change were can you get lower ball joints and what about the up rite king pin bit there is some kind of rubber and joint in that ?

Early start tomorrow to drive 170 miles to collect manual box conversion, I'm like a kid at Xmas! Will I be able to sneak in a bit of spanner time over Easter break? Hope so.

Just thought I would share a pic that Lee Dent sent me a couple of days ago while working on my car :wink: Rich

Red J plate at about 9:30 this morning going onto Morden Hall Roundabout. Was a little way back but almost forgot how nice our cars look from the rear. :)

Hi guys,i have just tested cylinder 1 injector connector several times with noid light and no power is goin to noid light.What do you guys recon is wrong.I was getting a error code 11(CAS).Is it possible that the CAS sends a siginal to 2 to 6 injector connectors and not 1?As cylinders 2 to 6 are working perfectly.Any help would be great.Thanks guys

The Voting for April's COTM has opened. My apologies for the delay in opening the thread. To compensate the poll will close just after midday on Ist May. Thank you and good luck to all that entered.. Steams..:)

Now and again they keep popping up for sale. http://www.ebay.co.uk/itm/1994-NISSAN-300ZX-TWIN-TURBO-AUTOMATIC-35000-MILES-/181383416295?pt=Automobiles_UK&hash=item2a3b4b49e7

Does anyone have a stock recirc laying about that you could measure the inlet diameter for me, basically I want to know the diameter of the hose that joins onto it, this is so I can order all my bits up for my bov install before I start to strip it down. many thanks

Hi Guys I would just like to say a big Thank you to both Mark and Dave at AUTOMODZ in Nottingham For All the helpful and honest advice That I have had regarding my zed and for the Work that they have carried out On The car Which I bought from mark It has all been done to an extremely high standard and At a great price It just go's to show you can get professionals without taking out a mortgage, I would not hesitate in recommending anyone with a zed or any other high performance car for that matter to Go to AUTOMODZ Even just for no nonsense advice I was not steered in the direction of buying anything that i did not need just to turn a profit, I have been to many ga…

Hi folks, i'm new to the forum and was hoping one of you might recognise this 300 and point me towards some more information about it, maybe a thread on here? I've not been able to find anything going from the reg- K222 PUP. Any help would be hugely appreciated

Hi everyone, I have a 1992 Nissan 300zx twin turbo UK model and at the moment I have it in the bodywork shop having a pair of after market side skirts and a remake copy of the rear spoiler sprayed and fitted to the car I need to know where could I buy the black rear strip spoiler decal in the UK from, do Nissan still sell them if so does any one know the correct part number, and is there any other company on the web that sell them or do I have to buy it from the US.

Ok, I have these nice clocks - and with help from the seller, I have wired up the KPH to MPH converter I got with them, as follows - You'll notice I have one light orange (dark yellow maybe) wire with a spade on the end that is not connected. I'm told this needs splcing into the main clock loom. That's great, but which wire? Left or right - I think, one of the left ones...makes more sense - ...but could be the right - I'm not sure what effect splicing into the wrong wire could have, but I imagine it cant be good. Any help would be greatly appreciated! :) EDIT - I found the selle…

riight well my car laid up for some time whilst i got to were i am today and whilst im home i use it on a daily basis. when i started to use it i canged the oil twice, since then.i have been running with an additive in the oil that was there to get rid of tapy hydrolic lifter but thats been in for over two months and dont tap anymore so want rid,. so time to change oil again. dont want to thin nor fully sythetic , cars done 88 thou and going to be changing prob 4 times a year. i do like to drive her. any thoughts welcome.sorry 1990 man tt

Hi does anyone no if nissan ever made a lightweight model ?

today when removing the power steering oil cooler i cut in to the pipe i was ment to leave in just nicked it its now goosed. its the pipe from the power steering pot the bottom hose on that its runs from the pot and along the front of the car next to the rad? i am going to have to cut the copper pipe its 10mm and then buy some power steering hose and connect the hose to the copper pipe what the best was to do this flair with a good clip or some kind of hose to pipe connecter ? was kind of psi is in the power steering pipes ?

Hi guys i just reinstalled my ptu after cleaning the connections now i am getting error code 21(ignition signal circuit),and the car is running rough as hell,still no joy with cylinder 1,but the car is running even worse now.Anyone else have this problem

I would like to replace the dashboard lights and pod lights with led ones I notice there are 3 different sizes of bulbs anyone know what size I require or has anyone done this to theres? I did purchase some from ebay but the connection wasn't the same when they arrived so will have to swap Sent from my GT-I9300 using Tapatalk

You do get free delivery.... http://www.ebay.co.uk/itm/Nissan-300-ZX-Allied-Nippon-Front-Brake-Pads-Genuine-LOW-COST-Service-New-/351001859863?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Model%3A300+ZX&hash=item51b9575717