General Discussions - 300ZX Related

Hi guys can anyone tell me if all uk cars had a power steering cooler also is it part of the oil cooler or is it separate thanks Taff

just want some thoughts on what colour i should paint my callipers. i was thinking black. the colour with the most suggestions will be the one i pick. pic of the car at the mo

Well good couple of days getting the zed ready for paint,all welding and filling done. Now sanding ready to for priming,i have used 1200 sandpaper on old paint to key primer to the paint is this right or do i wet and dry it as well? I know between primer coats i have to wet and dry it using 1200 but do i do this before applying primer? How many coats of primer do i give before top coats and how many top coats would you say i apply? Any advice would be greatly appreciated:-)

As you can see from my previous thread ive tried various things to try and work out the problem Someone mentioned limp mode. Could this be the cause? If so how do you get it out of limp? Tried ecu diagnostic comes up 55 clear.. the reason why im thinking this is that when Im im in drive it goes from 1st to 2nd while im in 2nd a fairly high revs u can feel the car hesitating to change but doesn't then if I put it into 2nd you can actually feel the engine-gearbox take the strain as such. So is my car in second or 3rd???? Sent from my GT-I9300 using Tapatalk

Which spark plugs should i use running 16psi ,water injection and big greddy sidemounts. And 400+ bhp, or should i say 6 iveco lowloader power at min!

Anyone know what the correct original offset for the european 300zx tt ? I have searched and googled and found everything from 28 to 40 on the offset.

Hi guys, well i finally sold my gearbox damaged germanic pile of crap called a BMW to 2 latvian guys from sheffield. So with the sale done we started searching the auto websites for a decent Zed, Easier said than done, good ones to expensive, bad ones to cheap. Then on some obscure auto sale site was an advert, no picture, but an interesting description and best of all, just up the road in wisbech. Finally, a Zed for sale that wasn't in Scotland or the West Country. Next day, pictures supplied, post code in hand, off i go. As soon as i saw it i knew i would buy it, but i played my poker face, prodding, scratching, smelling, feeling.. and that was just on me. As soon as i…

On one of my many searches for all things 300zx i came across this site, which looks kinda cool for a dash update http://www.popformance.com/Products/GRC/

Just been watching this with the other half when a nodded Zed came on. It said it was in Dagenham.....

Hi Guy's I've owned my Nissan 300zx TT uk model for about 2 months now and I've done quite a lot to it so far but haven't finished yet, it came with no mats does any one on this site make customs mats for the zed.

Came across this beautiful swb red and was wondering if anyone knew who´s car is it?? any more pics outhere?

Hey guys,so finally i got cylinder 1 working,So after all it was the ECU,Car is running sweet as a nut now.Thanks paul for the ECU.And a big thanks to everyone here on helping me sort it out.You guys rock:thumbup::thumbup::thumbup::thumbup:

Got started on manual conversion this afternoon, got brake pedal fitted, clutch pedal and servo fitted, down to workshop on Wednesday to get box swapped and plumb in the pipe work and sort wiring, then get props bolted together and get them down to the balancing company. Going to bhp show in 2 weeks so that's my deadline to have it done!

Does anyone know where to thread the tubing that goes from the back of a boost gauge through to the engine? I cannot find a single hole in the rear of the engine bay. Any pointers/pics? I want to install an after-market boost gauge in the car... Cheers, Greg

From what I've managed to learn, this wire is connected to a contact inside the barrel, which sounds a bong; if the door is open, with a key in the ignition - The barrel is from my 92 NA, now installed in my 1990 TT shell. There is nowhere to connect it in the earlier shell, so I'm guessing I'm going to be 'bong-less', I'm just going to leave it disconnected...no choice really, lol. Can anyone confirm that I have this right? Cheers!

A nice silver zed drove past me on Eggbridge Lane Chester today...I was out running and gave a half wave but realised I probs looked a bit stupid haha. Reg plate was H ***YYY...I think it was either Tim & Yvonne or maybe Sorge? S.

Hi guys, quick question which I'm pretty sure I know the answer to, do you need a working rear fog light for the mot, Cheers Rich Sent from my Lumia 900 using Tapatalk

Before I start making enquiries, What would you guys/gals consider a good price for a replacement windscreen (fitted) for '92 2+2 import ?

http://www.ebay.co.uk/itm/Nismo-1999-2000-Fairlady-Z32-300zx-JDM-Xenon-Headlights-/201076922984?pt=Motors_Car_Truck_Parts_Accessories&hash=item2ed11e5a68

as titles says. cant find my listed items which have all ended. ive managed to re list one item by clicking on the notification and clicking private or unread messages. but now i cant find it or any way of relisitng. when i ccheck under my classifies theres jack all!! any help

Looking to hook my car upto someones Conzult if they wouldn't mind helping me out? Preferably near ML6 7TR. Cheers guys.

Hi Guys, Just a quick question what is the best way to re torque the 27mm lower pulley bolt. Is it best to put the car in gear and hold it on the brakes or jam the fly wheel ring gear ?

My heap of about to be scrapped junk of a ZX has just left me stranded on the A14 near Cambridge! No idea at all what's wrong with it, just started coffin, spluttering, misfiring and cutting out! Have checked all connections under the bonnet and it's not overheating and I've got a 5 yr old in the car aswell! I'm really pissed off with this car at the minute coz it's just one thing after another! Any ideas? Anyone In Cambridge? Paul the fuming!

Probably been said before. I've read that the BMW E31 brembo's are basically the same as a R33 GTR's. Also the STI's 2005-2007 fit the Z32? Are there any other calipers that fit?

I have an original Compact Disc Player installed. My problem is that it will not play an entire disc in one session. It will manage to play 10 or 11 tracks of any given disc before faltering and eventually stopping altogether. After that it will not respond to anything other than disc in and disc out. The funny thing is, if I leave it and try again tomorrow it will do the same again! Any ideas?