General Discussions - 300ZX Related

n/m [This message has been edited by senna (edited 23-11-2001).]

Hi Folks, I have a full set (front and rear) of brand new grooved disks with green stuff pads for sale. For use with original calipers. All still in original packing. Also have a set of chassis dynamics lowerings springs which have a drop of around 35-40mm. Prices are as follows, Disks and pads - £600 ono Springs - £120 The lot for £700 Call 07961 543 786 if ur interested Kash

Hi Folks, I have a full set (front and rear) of brand new grooved disks with green stuff pads for sale. For use with original calipers. All still in original packing. Also have a set of chassis dynamics lowerings springs which have a drop of around 35-40mm. Prices are as follows, Disks and pads - £600 ono Springs - £120 The lot for £700 Call 07961 543 786 if ur interested Kash

Oh by the way, lowering springs are available. There brand new boxed and are for the TT. Drop of about 35-40mm. Can also b used with the standard shocks. £120 ono.

Hi my tension rods are going and it will be a while before I can get them done is there any chance it will damage other components Mark

wanted water radiator for my 1991 manual twin turbo jap import. can anyone help.

Heres a problem i have been putting up with for weeks now. I should really get it sorted. After starting the car the power steering usually goes off after a few minuits then a few minuits later the hicas light usually comes on. If I turn off the ignition and restart everythings fine again for a little while then it goes again. The speedo is working fine so It cant be the speedo sensor thats bucked. any suggestions? Paul

Right folks, for those who r interested i have a full set (front & rear) of performance grooved disks. They can be used with the original factory calipers. They are brand spanking new with new green stuff pads to go all round. Offers around £600 wud b nice.......... Kash

Anyone any news on delivery of the kits? As i dont want to fit the new pipes untill its installed, and the pipes are taking up the spare room! harve

Opinions please guys. Although my car passed its MOT today, there were a few points noted..... 1) Front top link bushes are buggered (passable with a warning). I'm thinking of going for adjustable rods and was wondering what other people have fitted, have looked at fitting etc etc etc. Have looked at the Stillen bars but would rather have a rose jointed style if it is available..... 2) The hicas end rods are going at the hub. Are there any uprated versions out there or am I stuck with the nissan versions??? I still want to keep the HICAS so don't even go there 3) Sills are rotten (I think this is SRRAE's territory) and need replacing - thoughts on…

At last my babys have arrived ------------------

I want some. Anyone else? Johnnys an EBC dealer so he might be able to get us a discount if theres a few. Redstuff from the Red head Paul

2 x Nissan but no Porch? Oh dear!!! Take a look...

ive never looked on the 200 or supra sites wots the address of them peeps

I have a top Quality Blaupunkt CD Player as new c/w Instr manual well Over £200 new accept £70 Obviously in perfect working order also have a couple of removable front CD compatible Tape players see orig post Cheers mike

Just to let you guys know who are going to the RR day, Japanese performance magazine will be there to cover the event, so get cleaning those cars, on the bad side i can't get there, problems with getting a car on the ferry to drive down and no matter what way i look to getting there, i just can't do it, really looking forward to meeting you guys too. A few of you have got a couple of orders with me which was arranged to bring down, please e-mail me your details and i will post to you, sorry fellas, the shit that goes with living on an island !! smithy

mine is a 90 jap and wont go any faster than about 120. I am planning on intake kit, gutted cats or cat back, front and back exhaust, and maybe be having a play around with the boost at sometime (like there's no way I'm going to resist that!)and also will look into plugs, timing etc etc etc.....al in the future. question: I want to lose the limiter but dont see the point in forking out on a new chip just to do that when I know that the engine is going to need to be managed differently once I start bolting stuff on,so, is there some way of jumping past the limiter without spending a fortune ?

Sorry I'm bored! Spank the Monkey Tim

I contacted my warranty company about my knackered heater matrix and they won't pay Nissan Dealer prices but the dealer I bought the car from have a special rate with the Honda Main Dealer down the road. I took my car down there this morning and they phoned back an hour later saying one of the hoses under the engine has also split (fair enough I thought) and they can't check the heater matrix without full pressure in the system so the hose will have to be fixed first. I said surely you can take the dash off and look at the heater matrix as it must be fairly obvious if its broken as its dumped several litres of water into my car, not just a few drips. No, they cannot tell …

Someone on here a while ago was talking about getting hold of clear repeaters, does anyone remember who it was ? Pay day soon, time for some goodies

... since it's quiet on here, a little humour is needed. http://www.twistedtunes.com/download/chatroom.exe Enjoy Tim

Why doe sit keep staying on for ages after I've taen the brake off ? Not too worried if it's just because the brake needs adjusting, but does the light signify anything else ? Also does anyone know how much a cv joint is for the Z ?

Hi ya guys! As I'm coming down to meet y'all this Saturday, I'd like to know how long you guys are going to be there. I need to drop the other half off at Leighton Buzzard first at around 0900hrs. Will you still be there around 0930/1000hrs? And until when is the event? Sorry for the daft questions. Cheers Danny

I mean the whole think 2 Turbos plus anything else required to fit them