General Discussions - 300ZX Related

CAN SUM1 HELP PLS WHAT DO I HAVE TO DO TO FIT MY FRONT STRUT BRACE AS THE HARD PIPE FUEL LINE IS IN THE WAY OR HAVE I BEEN RIPPED OFF BY EBAY??? :headvswal ALSO CAN U BUY ALREADY MADE UP HALF ROLL CAGES 4 THE LWB Z thanx

Hi guys Im gonna do a full service and wondered whats the best oils to use? Im gonna do engine,gearbox and diff. Also do you guys always use geniune nissan filters? Im also thinking about changeing the air filter setup from standard and wondered whats the best setup to go for,the cars a uk tt completely standard with 57k on clock.

Hi guys, the alterenator died in my 300zx import, so I took to a local alternator specialist and it said it will take half a day to get it off, and another half a day to put back together. So it would be around 140 quid. Then when he took it off he realised I need new belts, he is reconditioning the alternator. For this hes charging me 240 quid now. IS this a fair price????

hi can one of you clever bods help, when i push the button for the washer jets for front windscreen my rev counter rises and also occasionally when driving rev counter needle shoots up to 180kmh and straight back down. My zx is a 92 import with a dreaded convertor fitted cheers

hi all i have just got my car back from the bodyshop thats another story ...but when i drove the lady home the clutch was really heavy. i got outside my flat and let it idle for a bit cos she hasn't been run after looking under the bonnet in a dazed manner i tried the clutch again and it seems to have softened up a bit :confused: :confused: wtf happened there then

Thanks to Chris at southwestz.co.uk, I have an injector to swap with my knackered one. My dilema is that the codes stamped on the top are different. Is there an easy way to tell if they are both TT injectors? I don't want to put it all back together to find I'm running lean on one cylinder and to have to do it all again. Thanks Tim

What ones are on the market and what are the pro's and cons of them DTA,AEM, and Link? if you could keep the expalnations as simple as possible, as I have the knowledge of a whelk when it comes to these things :( thanks in advance Russ

Been in Scotland now for 8 months, saw a red Z in dundee when i first got hear... but its been 6 months since iv seen a new one (apart from yamez cause he lives next door!)

I'm being really thick i'm sure... do the door locks on the z32 zed have motors/solenoids? The reason I ask is my drivers side lock barrel is knobbed (thieving scum tried to screwdriver it) & I have a universal remote central locking kit available to me. It consists of a black box & wires which you connect to the motors (of the old style central locking which only works with the actual key in the lock.) and a remote key fob. I was hoping that rather than messing around changing the lock barrel I could just use this kit as the passenger side lock works if i lose the remote fob. Any advice or links would be much appreciated folks. :bow:

Is this any good people? seems very cheep to me? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8012375718&sspagename=ADME%3AB%3AAAQ%3AUS%3A1

new to this forum and 300zx,s going to look at jap import tt tomorrow im a qualified mechanic but is there any specific points that need checking on these cars. thanks.

Ok guys obviously when car is cold idle is higher but mines is sometimes idling at 2k when cold, when you change gear at lower revs it will jump up to that 2k between gear changes, car is sometimes fine though. Also occasionally when warm the car will idle at around 1.1 - 1.5k, this doesn't happen much but both probs are kinda annoying. What can i check and what are the possible causes? Cheers.

Hey everybody. I just had a question. I was thinking of ordering a Redline ECU chip from E-bay because its really cheap. Would it be safe to put on a 93 300ZXTT. I already have the full catback exhaust system and the JWT intake. I wanted to complete the Stage 3 set up. I would love the JWT ECU Chip. But I dont have the money for it right now. Also. What does it mean when they say the ECU Chip is already programed. Does that mean I can have the shop install it without tuneing it.

since buying the zed ive not been boosting properly 0.6bar...upon inspection i found the aftermarket apexi solonoid under the bonnet to be disconnected at one side, what i belive to be the wastegate hoses (which come up from the turbo region) are plugged up with two screws, code 55 reads from the ecu. so ive reconnected the other side of the apexi soloniod to the blanked hoses and t'd it off. now on the way home tonight im only boosting to 0.4bar???and car feels really heavy!!! has the apexi soloniod packed up and thats why it been disconnected? if i put the hoses back to their original places and reconnect the standard boost soloniods (disconnected at…

Does anyone know if you need to soak K&N or blitz air cones in any special solvent or oil befor they need to be fitted - the BLitz style kit i boght came with no instructions (bloody Ebay). Its only my dad said he had to soak his K&N cone for his motor-bike Cheers Z Man

Hi guys, I'm trying to remove my gear-shifter to replace the bushings, and it was all going just grand until I got to the final bolt on the linkage at the bottom of the shifter. The problem is the thing won't bugde. I've spent probably half and hour trying to get it to move, with varying levels of force, but obviously don't want to overdo it... I also decided that walking away from the job until tomorrow morning might be wise when I started having vivid fantasies about beating the guy who designed it unconscious with an oven door. Question is, am I alright to use something like WD40 on it to loosen the bolt? I realise it gets pretty hot down there so don't re…

Red (I think TT), with larger spoiler, some split rims (gold centres) LWB on a K plate (again, I think). At about 4.30PM today.

my zeds been parked up for a while its a t t . ive had it serviced everything is fine apart from when i put full lock on the steering wheel it makes this creaking noise

At 11.30am Red UK 300ZX Twin Turbo hogging the outside lane!!!!!!!!!!!

Had a little fun with "old boy" in Red Z with my blue chipped S3. looked a bit pissed that I was keeping up :confused: ! Just had the car chipped so it was good to stretch its legs! Cheers

At about 8.20am on the A338 travelling north from Ringwood, yesterday?

I just wanted to know If I can fit 6x9 speaks on the doors. I have some really nice one's and I just wanted to know if they would fit. Thanks everyone

Had my Zed 2 Weeks and absolutely love it !!! It's a jap import so i don't know when the cam belt was changed, which i would like to change.I live in Leeds and need to find a garage that will look after her.I'm prepared to travel in the yorkshire area .

IT WILL TAKE MORE THAN AN ELECTRIC FENCE TO KILL THE SNAKE OK AM BANNED TELL A JOKE BANNED HAVE A LAUGH BANNED POST ATHREAD BANNED POST A REPLY BANNED TRY TO SEND MY SUBSCRIPTION BANNED BUY A ZED BANNED 14 YEAR OLD BOY WITH SMALL PENIS BANNED CHAV WITH NOVA BANNED ASK A QUESTION BANNED MUMMYS BOY BANNED TAKE ALL YOUR ABUSE BANNED WRITE AN EMAIL, FORUM WILL NOT REPLY BANNED I have told you before you will never get rid of the snake I am like a bad smell never to go away, O I forgot you know my ip number Iam shakin in my shoes you obviously have to be GAY to be a member of this forum like pot hole chewy or chunk go on ban me I love it but in the…

Some loon in a silver nissan pick up towing a trailer with a zed on the back going like fook, on the M6 southbound last night. (WEDS) ;)