General Discussions - 300ZX Related

Whats the deal? I've seen poly ones solid ones etc? some are saying with the solids you need spacer? confused! also do I need to fully remove the subframe to change them? or can I just drop it six inches sort thing? or is dropping it six inches the same as dropping it out completely?

Getting vibration at 40mph. I spent this morning changing the prop shaft over. I got a prop from a member a few weeks ago. I took it to a prop specialist and they put it on there machine and they said it was good and the bearing was good. Put it on the car and still getting vibration at 40. Can anyone suggest what else it could be because its doing my head in.

Probably already asked this but which is it that fits the Zenon front bumper is it the mx6 lights or mx5?

Is the high temp spray paint any good? http://www.ebay.co.uk/itm/VHT-High-Temperature-Wrinkle-Plus-Red-Aerosol-Subaru-Impreza-Inlet-Manifold-/281066319633?_trksid=p5197.m1992&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D14%26meid%3D5797477003053097195%26pid%3D100015%26prg%3D1006%26rk%3D1%26sd%3D281066319633%26 I was thinking of painting my water pipes so that I don't have to keep polishing them

Hi Just read thread about gearbox oil which recommended MT90 which grade and how much is needed for complete change, also to the guys who replied on my scuttle trim thread can email with prices would be appreciated. Simon

Morning all! Fitted my KYB AGX adjustable shocks and Ebach springs yesterday but have a slight problem with my Rear Tyres grinding on the arche's when going over bumps... It's fine when driving along normally but if i go over a bump in the road you can hear it rubbing the arch as the wheel is trying to go up there.. Now my tyres are 285/35/18 on a 10j rim and are getting on a bit so thinking of maybe changing them to 285/30/18 so they are not as tall and may just help when going over bumps. Was trying to find 275/30/18 on the net but that size doesn't exist and 265/35/18 on a 10j rim the tyres are too stretched on and the wheel rim's have no protection! At the …

Hey Guys, Got a slight issues where the noise comes from the front passenger side wheels. What could be the cause? It only happens when the car is moving slowly after it stops. Its like a creaking of an old suspension kind of sound lol. Mine has standard suspension with aftermarket springs, any fixes for this?

Fao ajuj12 or anyone that has problems with the old windscreen / targa trims. I did this thread 4 years ago, and this will help you revamp old worn trims using plastidip. http://www.300zx.co.uk/forums/showthread.php?122081-How-to-refurb-rubber-trims-with-pics&highlight=plastidip Any questions just ask stu

Hi everyone, When putting my car into 2nd gear it crunches, it seems to be only when the car has just been started, once the engine has warmed up she pops in 2nd fine and it's only 2nd gear it happens with. Any ideas? Cheers James

Audio Package Deals Full JL Audio Set up Sub Amp 4ch Amp 10" Subs x2 6.5" Comps 4" coax Custom Door Pods 2x 10" Sub Box's In black Sub Amp JX500/1D Mono block Class D Sub woofer Amplifier, 500 W x 1 @ 2 Ω / 300 W x 1 @ 4 Ω - 14.4V 4 channel Amp JX360/4 4-Channel Class A/B Full-Range Amplifier, 90 W x 4 @ 2 Ω / 70 W x 4 @ 4 Ω - 14.4V 10" Sub Woofers 10WXv2-4 WXv2 10-inch Subwoofer Driver (200 W, 4 Ω) Front Speakers TR650-CSi 2-Way Component System: 6.5-inch (165 mm) Woofer, 0.5-inch (12 mm) Textile Balanced Dome Tweeter Rear Speakers TR400-CXi Coaxial Speaker System: 4-inch (100 mm) Woofer, 0.5-inch (12 mm) Te…

Hi, Can anyone confirm if it is 8mm (inner diameter) or tell me what the correct size for the water hoses in the engine bay is?

Hey Guys, Out of the few z's i have owned i notice that the end part of the windows always tend to have vertical scratches on the glass. Is there a particular reason for this??

Does anyone have these fitted and how does it change the sound etc? Any clips? Just got hold of a new set and gonna get them fitted over the next couple fo weeks.

Hey again does anyone know were i can find the door rubbers or whatever there called that go around the top of the windows and round seems mine are leaking, Was washing the car for the first time the other day and realised there was slight drips of water on the passenger side seat

Part way changing out my standard exhaust system to a 3" fully stainless one. So far I have managed to fit a de cat mongoose back section. At the weekend I hope to swap the pre cat standard part for a 3" inch through stainless one. My question is, can I remove the cast elbows with the engine in situ so as to de cat them and re fit? I know.. I can but dream!!:lol:

Hey guys, so i bought a zed in the the end of noz , great car really happy with it ! Car does have a few elec problems though !! 1 , cd/dvd player is not working and there is no power going to the red or black ?? I have checked the fuses under bonnet and in drivers footwell and they all seem ok ?? 2. The heater blower is working and gives out heat but does not blow through the vents into the cockpit , it does blow onto windscreen ?? Is this electrical ?? 3. Driver door will not lock on key or fob, key just turns it but it does not do anything ?? Any one any idea what is could be thats going on ?? I have noticed there is 2 heavy…

Hey guys before i waste my time taking of the bracket to drain the gearbox fluid from my auto box is there a filter and if so were can i get one, Ive searched on ebay but cant seem to locate one

This will be difficult to explain but here goes. The zed is running well, it idles fine, is smooth and pulls well on acceleration, but I have this small issue when driving at a constant speed. You feel the car ever so slightly bouncing in the revs, which manifests itself as a small rhythmic vibration in the cab (Steady!). Its most noticeable when you are in a higher gear and often when cruising up an incline. It only happens when the car is in gear, and stops instantly if you take it out of gear and coast, so I know its engine related rather than the drive train or wheels. Its like something isn’t controlling the revs properly and is bouncing on and off, …

My God im in love.

Hi, I have my zed booked in for paint at the end of march. But tonight my painter phones and say I can now do this plasti dip and the do a lovely matte red that would look good on your zed.!! But iv only seen a couple of pictures and im unsure of how it would affect say resale etc. It is basically a liquid wrap, looks quite cool and he has offeres to do it for fre as long as I buy the supplys at 300 quid!! So whats everyones thoughts?? I would imagine most people on here will say dont do it but I could be surprised!?!

Hey Guys, My zed's got a spare tiny front number plate, what are the regulations in the uk regarding this matter. Would it e legal for me to use this instead of my full size number plate? Its white with black normal font! Cheers!

So I saw this and thought hmm, if I got it cheap then I would haven't to spend the next two years welding my sills, I could combine two NA's and create one perfect one, I'd also have plenty of spares - http://www.ebay.co.uk/itm/251232138498?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648 I've mailed the guy asking about the condition of the sills and he replied "The sills look average in my opinion". So I've responded asking some questions and if it would be ok to view it, jack it up and prod... I just wondered if anyone knew anything about it as I see its been re-listed once, but also receiving no bids (probably as they guy has only 2 feedb…

Nissan Boot Decals Silver/White/Black £6.50 Posted Side Logos £35 Posted Custom Jobs Please pm for quote

question for you all, can you fit a TT rad into an NA? ended up in a hedge yesterday after some **** clipped the back and its going to need a new rad as a branch went through it, ******* didn't stop either, and the police are useless so dout they catch him the bodyshop are going the rest of the repairs fairly cheap, luckly i have a spare bumper or 2 lol, but i have an alloy TT rad siting in my garage and want to know if i can make it fit?

Has anyone used torque exhaust in Enfield