General Discussions - 300ZX Related

EVENING ALL. is there a secondary fuse book anywhere. My internal lights,clock etc have fused and I cant see a reference on the main fuse box under the bonnet

http://www.ebay.co.uk/itm/321072146159?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649

I have had the speedometer lights flickering for about 3 months, i decided to look into it and today i found that its not a cable or plug but that its the plastic pcb board which sits directly on the rear plastic connecting everything. It has lifted slightly in places and when i push the slight bulge back down the lights work. is there any way of buying a new plastic pcb board, also i cant find any OEM dials anywhere online??. any help on this situation is greatly appreciated Marlow TT Cornwall

Hi guys, need some parts for my lil starlet gt turbo ep82 project.. only problem being, finding a courier for: driverside front wing complete tailgate inc glass + motors size and weight are the problems I keep running into. any ideas?

Where is the best place to get a decent clutch from? Finally about to put in the manual conversion and can't afford the £1600 for one from japspeed. I have seen this one on Ebay but i don't know if it is right or not http://www.ebay.co.uk/itm/NISSAN-300ZX-VG30DETT-EXEDY-CLUTCH-KIT-NEW-/220607424449?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item335d3a27c1 won't be doing trackdays just the occasional trip down the strip at Santa pod

Hi NOZ, I am making this thread an open one in case there are others after the same info. I am currently using a chip I bought off you on ebay on my rebuilt stock motor and it is running very well, pulls strong at 1bar boost with no issues at all....that you for that. I have rebuilt a second motor with some good bits, wisecos 88mm, eagle rods, stock heads port matched and flowed, stock manual cams, cometics, ARP studs, 550 injectors, flowed stock exhaust manifolds with GT28RS turbos and divorced down pipes. I am hoping you can supply a chip which will support these mods or do you recommend a stand alone ecu. I know there are others on this forum who have experise…

where the hell do I route the vac line through the firewall, cars manual so cant use the clutch master hole anymore. also its got a light up feature where should I take the spur to fee dthis from the sidelights?

has anyone got any they could scan and send me? worked out my dash doesn't light up because the silly things are blocking the OE dash lights, so need to try and get them working, but they are a mess of various wires and connectors so and wiring diagrams / instructions anyone has would be great. making do with the bltiz R-vit instead of a rev counter, but not being able to see fuel or speed at night is getting annoying.

I have been looking and looking at these, seem tremendous value for money with plenty of options and I notice there is even a small hole for the low fuel light which is something on my current indiglos I don't have :mad2:. As I have added a boost gauge to my clocks I now really need something new with 6 matching faces. Not sure on these though if I would of liked to of seen the red 300ZX on the rev counter as well to balance it up, maybe just me !! Also wonder if they come with a dimmer control. Here is the ebay link http://www.ebay.co.uk/itm/130850671118?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 And a pic, I'm thinking white with blu…

Ok since owning my second Zed I have changed the door handles for chrome ones, fitted locking wheel nuts and a nismo oil cap... very basic additions so far but today carried out my first major mod on the car. Even though the weather today was terrible for zed driving I took the opportunity to take some rainy pics of the car to show the new mod. Can you see it?

I have the lightened underdrive pulley set up on my car which came with belts from Danny at DTA, My query is what length is this belt? I have put my car back together after replacing turbos and all is fine....but I cannot get the belt to stop squeling!!!! so thought will get myself a new one and assume this isnt a standard z32 size:ohmy: Dave

small prob with hicas light on dash when its been cold the light will come on when u first start but after about 1 min of driving will go out and is no more prob any help anyone or am i panic for nothing

Just a quick question, http://www.300zx.org.uk/model_variations.htm This link... i don't know whether it's my lousy work computers with minimal flash or what have you, but a lot of the pictures aren't showing up. Is this an issue with the computer, do the pictures not exist or does the lack of picture mean that it is continuing from the previous - for example, SERIES I has no central locking & states "none". SERIES II has no picture or statement (MEANING THAT IT HAS NO CENTRAL LOCKING) SERIES III has a picture of a central locking key (MEANING IT HAS C/L) etcetcetc. SERIES I has a black speedo SERIES II-V have no pictures - DOES THIS MEA…

Finally got a veilside evolution exhaust. So it's the H pipe and the backbones as they are, so what do you think I should get for the front?

Looking at replacing as many of the OEM pipes as possible with AN fittings etc. Is the Koul tool worth the dosh? :whistling: I have read a few write up's about using the fittings without buying the tool, just wondered if anyone had any input on the subjest?

do i get permanet engine light in saftey mode?thanks

Hi all I'm looking to get all the window seals and scuttles replaced on the Zed as the cabin resembles more a fish tank than car during a downpour! My question is - is there anywhere I can get all of these parts brand new (OEM)? I appreciate this will likely be very expensive but figured I'd consider it first before dismissing the idea. Thanks in advance! Vig

OK this is a genuine question - though some of you may think the question is silly as you know much more mechanically than me so it may sould daft..... but anyway here goes.... As I have mentioned before my Zed has a 'shallow knock' at least that is what Jeff at Zedworld called it. HAving said that the car runs OK but the knock (which happens between applying power and letting off again for example when changing gear) annoys me To be fair to what Jeff told me it has not got worse (or much so) over the last 18 months However..... I am now in possesion of a good running engine courtesy of Noz and the doner car I was buying but he beat me to it..... complete …

Guy,s, Just seen these on Fleebay Maybe of some use to one of you, Cheerz Chris http://www.ebay.co.uk/itm/Nissan-z32-300zx-2-x-new-rear-quarter-sills-welding-bare-shell-body-panels-/160972924687?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item257abbe70f

Has anybody adjusted the drivers side window unit inwards? Very slight leak between the door window and targa seal (New seal) looks like the window unit wants tilting in a bit but i dont know how to do it. Anyone help?

Tamiya 1/24th Plastic Kit Models Zed cars Z31 / Z32 / Z33 / R34 / R35 More Here http://derbymodelshop.co.uk/shop/category_116/Jap-Cars.html?sessid=Dj4XOnwea386CgsdINOYTnJf44LHtWPKxM0En0cfsHOZwKj9qo4rK3q5N9fCPBZw&shop_param=cid%3D%26 Nissan 300zx LTD ( Z31 ) ( Tamiya ) £20.69 Inc Post Nissan 300ZX Turbo ( z32 ) Kit - C-487 ( Tamiya ) £12.85 Inc Post Nissan 350Z "Track" ( Tamiya ) £18.99 Nissan 370 Z ( Tamiya ) £35.99 Nissan Skyline GT-R V-spec - (R34) ( Tamiya ) £17.99 Nissan Skyline GT-R V.Spec ( Tamiya ) £15.50 Nissan GTR ( Tamiya ) £40.50

just seen this on ebay looks like has big front brakes in picture hard to tell might be worth a look if someone lives in the area http://www.ebay.co.uk/itm/Nissan-300-ZX-3-0-Twin-Turbo-BREAKING-/360507097705?_trksid=p2047675.m1850&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D11%26meid%3D5522827552259963043%26pid%3D100011%26prg%3D1005%26rk%3D2%26sd%3D181078257244%26

i am having difficulty finding out what size the dipped beam Lamp is on a 1991 300zx is, HIDs4U say its a H1, some people have said h4 and other places ive looked have said 9006 just looking for some clarity so i buy the correct kit for my car?? Many Thanks Marlow TT Cornwall

Id like a proper definative answer to this as theres so much confusion over it. Im running stock boost and syock ecu but full freefliw intake and exhaust, ive had an issue with the plugs beening blown out on wot in 2nd gear runs. Turns out I had na plugs gapped to 1.1mm ive fitted the right plugs now gapped at 0.8m which is a smaller gap than stock, is this right? Could it cause problems?

Couple of Z's seen going sideways, anyone from here ?