General Discussions - 300ZX Related

Evening all im after a set of fuel pressure regulators must be working order ,anyone on here got a set sitting around as i'm not sure if this is my problem but i'm eliminating as i go don't mind paying for them but not to much just in case it's somthing else

Has anyone else done this? What a mission needs some heavy handling on what seems such a delicate part. Also has anyone got a broken or cheap CAS unit. Has to be Mitsubishi thanks Dan

I know a lot of the stuff from the lwb and swb are compatible, but does anyone know if the rear bumpers are?

Are the door seals for slicktop / t-bar the same?

Hi guys, i'm trying to get hold of the above guy, any help much appreciated, or email to bofhware@hotmail.co.uk Cheers Rich

Hi guys My car is being re-trimmed in leather at the moment (seats and the tweed cloth under dash, around centre console and on door panels etc), but there are a also few problems with the plasticky vinyl trim. Any suggestions on how best to fix this? Main problems is on the targa trims (both sides) and also the rear side trims - which another member on here told me are an unusual type on my car? Oh and also the sun visors are rather worn Check out the pics.

Another touring suspension switch, only seen a couple in the flesh, looks different I guess. Jeff TT

Hello, I did have a search before asking in a new thread but got a bit lost in all the tech. Basically my new power means the clutch is slipping and the brakes were already a bit tired after my track day, they're fine for the road but I wouldn't do another track day on them. The car has stock brakes but an uprated clutch fitted by zedworld, unknown make. Who makes a good clutch is anyone selling one? I had a look on Japspeed but they didn't really have what I was looking for. I don't want an on off switch but need a stronger one. And brakes, the D1 ones look good but cost a lot for just fronts or just rears. Will it ruin the balance putting big brakes on the fro…

hi iv looked at the auto to manual wireing conversion on midlifz and gold and it don't show up only part part ie 1-4 the rest is blank any one got a manual to show how to do the wireing from auto to manual cheers ted

so looking forward to fitting these... anyone know any midgets who can get hands down the back of the block? :D

Hey guys picking my new alloys up this weekend will post up some pics once I've got them Now they are 18x9.5 et30 all round now the rears should fit fine what do you think the fronts will fit like? I had 17x8.5 et30 fitted before and they didn't quite fill the front arches?? Also what size tyres would you go for?

Just had the most insane worst 3 hours on my car so far removing the tint from the rear hatch glass:no: and when it comes off it stinks of dog sh1t too:confused1:...who,s ever done it and what method did you use?

http://www.ebay.co.uk/itm/160965898321?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649

Hi guys misses picked up my plenum today, had it powder coated candy blue. She just sent me some pics on my phone, and I am not impressed.. Told her to take it straight back, and call me when she gets there so I can spk to them on the phone, Guy says its the casting marks on the plenum, I no nothing about powder coat and said I aint having it cause to me that aint casting marks there is either water or something got on it, looks like blisters. If it was casting whole plenum would look like it.. He said pick it up tomorrow and he will do it again. So whos right me or him incase its the same tomorrow, I have some answers ready lol. Some pic…

Hi i just got a bride zeta 2 fixed bucket seat for my slicktop ,the question is can i convert my base mount bride frame to be a side mount i have the side mount brackets allready bolted on the new seat .Or will it be easier to buy a side mount frame does anyone know if there avalible in uk thanks .

everytime you go looking for something good you find tahts its available in the us or oz but here forget it, or you've gotta pay obscene postage. take these coil pack connectors for example. http://www.ebay.co.uk/itm/Nissan-Skyline-rb20-rb20det-rb25-rb26-rb25det-coil-pack-connectors-plugs-/300848288668?pt=AU_Car_Parts_Accessories&hash=item460bf4939c why the hell can you not get them at this sort of price in the uk there only plugs at the end of the day.

Does anyone have the wire diagrams/colour key for heated and electric seats?many thanks

Is there any chance of having car of the month again not for prizes just for fun have a different criteria each month and have it that you can only ever win one a year so as not to have the same winner all the time

Been working on these for a while now and I have now completed them and fit back on the car. I have sold over the last couple of months a few sets of led 99 spec copies but on these my own genuine units I have crammed in even more led's. 54 smd lights are for the tail or sidelights, 72 led's are used for the brakes and 78 amber led's are lit when you indicate, these figures are per side, again the tails do look much much better in the flesh and modern up the Z a bit more. The first 2.23 mins of the video with a little walk around is in the daylight, then 30mins in the fading light and then the final minute is when it was completely dark :cool3:. [vi…

As above, spotted on the link road by Hempstead Valley shopping centre in Kent yesterday about 430... I was going other way so couldn't get reg

Well Noz sent me a connector for my injector, so decided to change it over, started the car up, and its even worse than before i changed it, although the number 1 cylinder now has a non dodgy injector, for some reason cylinder 4 has decided to stop firing, so far checked the injector (ear test) thats firing away happy as larry, changed the coil pack over, still the same, and tested the coil pack spark, which was sparking away happily against the plenum, arrrgh, about to go out and change the spark plug for a known working one, hopefully that will sort the bugger out.

just looking around for one and check this one out http://www.z1motorsports.com/product_info.php?cPath=6_19&products_id=6723 - - - Updated - - -

http://www.ebay.co.uk/itm/BRAND-NEW-19-FUEL-5-ALLOY-WHEELS-TYRES-WILL-FIT-LEXUS-TOYOTA-SUPRA-350Z-/281060422760?pt=UK_CarParts_Acc_Wheels_tyres_Rims_Car_Wheels_ET&fits=Model%3A300+ZX&hash=item417081b468 I have always loved these wheels after seeing them on Ant 300zx's zed and comming with good tyres I think the price is very good. Anybody looking for a set of 19" wheels then have a look at these:thumbup1:

I need a full poly kit for an NA rear end, where is the cheapest? I'm doing the old TT to NA conversion, but for what they are, they seem very expensive, anyone know of a good place? May well do the front too...... Cheers, Tudor.

I am asking this out of interest as I am only contemplating it at the moment. Its just I'm fed up now of the cold running issue, and today when I started her a large plume of smoke came out the back :( Its a 90 n/a manual Its got a full stainless exhaust (which for those who have met me said sounds the nuts) Jun front bumper Clear rear lights with 99 spec lines with matching lines running through the reverse lights. 18" azev staggered alloys Mid level spoiler Mono steering wheel Leather interior Etc Various new parts I also have some impul skirts and veilside rear bumper that I haven't got round to painting/fitting yet. Like I said, I am just…