General Discussions - 300ZX Related

Want to extend the battery cable so what size do i need ? Reason being the higher capacity battery i bought has the terminals further away and i dont like the stretch or look. So want i would like is to snip the old clamps on, join a new fresh cable and use brand new clamps making it all look oem.

as above really where is the best place to buy zed plugs? for half decent money? seem to be some seriously expensive spark plugs out there.

Hi guys, I'm sure somewhere there is a thread with some info/ pics on the workings of the soft top roof mechanism? Can anyone point me in the right direction , cheerZ Daz.

Quick question, id like to uprate my rad at some point to a big core ally one, I remember when I done my manual conversion on my old zed that there were oil cooler lines from the auto box to the side of the rad but not on the manual rad... I'm keeping this zed auto so can you get a rad that has the oil cooler connectors on or do I delete? Or do I have to get something as well as the rad you would use on the manual? Hope that makes sense cheers guys....

I haven't used my Z since I got back from Cornwall in early January; I cleaned it and put it back in the garage where it has sat for the last 4 weeks..... ....So as it was nice and sunny today, I decided to take the Z out early this morning for the Sainsbury's run. But I didn't just stop there; I then drove from Beaconsfield to High Wycombe to buy the Halfords vouchers for the F1 comp prizes - and as I realised just how much I had missed driving the Z, I headed further afield for the sheer hell of it. And by the time I got home, almost 100 miles had passed under the wheels since I had left earlier!! Gotta love the 300zx...... It's not the first time I have done …

Ok car is coming along with regards to repairs. Since its gonna come back in various colours with all the different panels probably gonna try work my ass of to get some money to get the car wrapped. Now the question is what colour to go with since no one like the chocolate colour I posted lol was trying to think of something a bit different

L reg dark blue z in brixton. Was it you ?

ive got a pair of bailey dv26s sat here what size bung do I want to blank the recirc tube?

on full throttle runs im getting a popping, I think its coming from the exhaust. it goes from around 4500rpm upward, doesn't always do it. :S just worried its dett but from my experience that tends to sound like a ticking in in the engine high up. any ideas? I don't think its shooting flames.

getting up early and travelling by train to pick up the beasty. cant wait as i have loads to do to it before the show season, and need to find out why she still dont boost right (suspect boost controller solenoid ) but will be good to finally get her back, im sick of driving the clio about now, as it leaks worse then a t -top z lol

Trying to find more photos of this, but actually not a bad job lol

Well it been 6 months since I purchased the £500 bargain Zed and I put it in the garage to do some bits, well since its the new year I thought that i would get my arse in gear. My Zed Removed old spongy spoiler To be replaced by this lower lip spoiler which will blend in. Demon wide arse sorry arch rear bumper

As title, moving into a new house this week, finally get out of my pokey 1 bedroom flat, and a nice big garage for the zed! Thing I need to know is, as it's not taxed, can I legally tow it with another car, I presume I can just want to make sure! And will my little 2.0l 306 xsi be up to the job?

My main beams keep turning themselves on when the car hasn't moved. My neighbour has just texted me to say they are on even through they were not on when i left for work. Last time it happened i thought the light fuse had gone but when i checked it it was fine and taking it out then putting it back in again fixed the I think i might have a small leak on my divers side tagra our door rubber somewhere as occasionally i get a few dips come out of one of my a pillar gauges. This makes me think that there might be some corrosion on the back of my fuse box. How do i access it to give it a good clean up?

Hi just double checking here. Im going to use 10-40w running in oil for at least my first 2 oil changes on the rollers. Ive been advised to use full synthetic nanodrive 10-50w oil after its ran in. What's the difference between 10-40w stock and 10-50w? Also 5ltr should be more and enough for a full oil change on the tt shouldn't it? Cheers Dan

As title states, is there anyone in hull? Even better, anyone that would have a look at a skyline for me? Just to see what the condition is, how it runs and drives etc. Thanks in advance even if there isn't anyone.

Ive bought a sticky on number plate after lots of research into the legality of it all.. its so ambiquous.. one thing I cannot find the answer to. does it have to stuck on the front bumper or can I stick it to the top of the windscreen as it will still be visible. All documentation says front and rear and in a visible and clear location. also fonts, spacings etc.. cant make up my mind what to do on this one...

Got a day off tomorrow so planning to do a bit on the car. I've got a replacement propshaft, just the front half, to fit. Anyone got any advice or tips on fitting it? I know I have to drop the exhaust.

Hi All, This is my first post and looking for some advice on what to do with my 300zx. The car is a red 1990 (H Reg) UK targa top twin turbo. I've had the car for about 12 years but it has been sitting in my garage for about 6 years. Knowing nothing about cars/mechanics etc...it has not had any special storage treatment (i.e. blocks or anything else that you are meant to do when storing a car!). The reason it has been sitting is that a few months before I lent it to a (sensible) friend so they could get to work one day. He was driving and it just cut out, originally we thought it had ran out of petrol but this was not the case. He said there was no noise or ba…

Couldn't get my petrol cap open today or for the last few weeks easily myself as I think the cable has slackened off a bit, seems the notch bit that pulls back is barely moving or simply not moving enough. is there a way to tighten it up ?

Right been offered some alloys sizes 5x114.3pcd 18"x7.5j The chap says the following tyre sizes.... 215/45/18 225/35/18 225/40/18 All this boggles my head can someone let me know if the wheel size will fit and which tyre size is best to go for. Appreciate the feedback

my intentions are to remove all arms, suspension and springs and refurb, obviously its possible to paint up the non moving parts in heat resistant paint , but is there a way to polish up the springs and suspension as they are aftermarket parts and would be a shame to be replaced

I just bought another 300zx whilst my other one gets finished of, My question is at resonable high speed the car seems to grab the road to much and acts a little scetty. ithought when ive looked at these tyres sives i have found the problem. can you confirm? do these tyre sizes sound compleatly wrong? 225.40.18 at rear and 225.40.18.at the frount. On my other 300 the set was 245.40.18 frount and 265.35.18 at rear and that seems to hold the road and be tones more settled. Am i right in saying that the front tyres should be slightly smaller and a higher profile than the back like my other one?

im putting decats on the Zed but being told this will ruin the turbos because of back pressure. the tech threads also seem to assume this. Has any body any evidence that this is actually the case or is it simply they speed up the process of already worn turbo seals?

Maybe a daft question but whats peoples thoughts on changing the thermostat form something like a nismo that opens earlier than a standard thermostat. my thinking is they run hot these cars so this should help?? or is my logic screwed?