General Discussions - 300ZX Related

Yellow Zederoonie spotted heading Northbound on the M1 at 6pm between j19 and j20??? ------------------

Just seen the trailer and the last guy talking is definatly sitting in a Zed. Is it anyboby here?

guys jus changing the engine oil, online manual says 3ltrs refill....is that enough?? my old mans motor took 6ltrs jaz

I am looking for upgrading my suspension and after browsing around I came across the following brands. KONI TOKICO and Eibach Springs My only concern is that the Web sites I checked are selling suspension for the 2-seater 300zx and I dont know wheather it will fit my 2+2 TT. If you know any places/websites in UK where I can buy, or any other good brands please let me know. Thanks

hi guys, booted my 300 quite heavily the other day and i noticed a weird noise after, when stationary? it sounds like a drain pipe swallowing the last few drops of rain?? kinda gulp gulp if thats right?? it sounds if it is coming from the drivers side, behind the dash.... you can hear it more through the vent on the side of the dash when the door is open.... could it be something to do with the aircon? cheers jaz

Breaking Z32 All parts available Ring Ken 01708 680695 07751 149211

thinking of a car to mod up a bit as the 300 is running so well at the moment( now ive gone and done it!) anyway, anyone got any ideas for something that hasnt been done yet? as strange as you can get them!!!! im up for any ideas from a lada to a porsche. leave it to you lot............ at the moment it might be a tt ford pop- just an idea to get you started cheers

I have toyed with the idea of putting bodykit etc. on my car, but I think the stock bumpers etc. look pretty damn good - classy rather than 'in yer face'impressions which aftermarket treatments can give. One flaw in my eyes is the bit between the front sidelights/indicators. My car has the number plate there, so it breaks it up nicely, but without this, I would feel it needed something there. This could simply be a coat of paint on the black plastic, covering, say, the middle third. the centre front bit is a visual focal point and usually taken up with a grille/badge, but on a Z it is a bit bland. Neone thought (about/of doing) this ? Also - the rear spoile…

. [This message has been edited by jaylox (edited 13-08-2002).]

. [This message has been edited by jaylox (edited 13-08-2002).]

I had the chance to drive both the banked circuit and the infield track at Rockingham Motor Speedway yesterday, unfortunately not as fast as I would have liked but, fun never the less. Has anyone done any track days or experience days at Rockingham? Tim

I am in the market for a low mileage UK model. Series 2 would be nice, but so would finding some hens teeth! Just sold my 260Z 2 seater and need a 2+2 as wife is sprogged up!! Fancy getting a bit more modern, so what have you boys got for sale out there then?

Help !!!!!!! I still cannot get no reversing lights to work, all the other lights work ok, but my reversing ones just won't work. The bulbs are ok but when I put my Multi-Meter across the contacts they appear to be shorted no mater if the car is in reverse or not. Does anyone know of any fuses or relays I could check. Any help or Ideas would be greatly appreciated. Thanks in advance Mike

A mate wants to buy a pc for general home use and the interent. Can anyone point me in the right direction of the cheapest way to go abouts it. Thanks Vijay

My Z goes in this week to get the box sorted..... And while it's in there I have to drive another car, my mom has said I can borrow hers for the week........ I'm devasted to tell the forum that it is a........ K Reg 1.1 White Rover Metro......(wibble) Matty. ------------------

>MIND GAME >>2% or 98% >>This is strange...can you figure it out? >>Are you the 2% or 98% of the population? >>Follow the instructions! NO PEEKING AHEAD! >>* Do the following exercise, guaranteed to raise an eyebrow. >>* There's no trick or surprise. >>* Just follow these instructions, and answer the questions one at a >>time and as quickly as you can! >>* Again, as quickly as you can but don't advance until you've done >>each of them ... really. >>* Now, scroll down (but not too fast, you might miss something). >> >> >> >> >> >> &gt…

Anyone found an alternative to the thin black strip that goes alonf the bottom of the doors and the read bumper. Nearly passed out when I asked Nissan the price of a replacement.

Hi there, does anyone know where I can get a clutch for my 300z TT at a reasonable price? I'm supposed to be going on holiday next month & so I'm skint at the moment! It doesn't matter if it's a stock clutch because my car is only running about 320BHP. Cheers.

I replaced the vacuum line to the driver side AIV with Samco hose. Within 4 weeks it had been sliced through by contact against the endge of the hole between the engine way and the wheel arch. Any ides how to stop this happening agin. That hole is damn tight with all the other stuff going through

hi guys i have a customer who has just brought 1987 300zx.the previous owner has had a few headlight problems.we have no dip beam,and only one main beam to one side.who ever has looked at this before have bodged the wires to the head lamps there seems to be quite a few relays and at the moment i have no idea what's what.so what i need is a wire diagram and the location of any headlamp relays ect.or maybe there a common fault that you maybe able to shed some light. thank in advanced john.

For sale my 300zx non turbo automatic black with black leather interior. I purchased the car new in April 1994 in the US and imported the car to the UK in 1995. Mileage 69,200. Price £6,250. Location Marlborough Wiltshire. For more information please email me at i.bartlett@virgin.net

[This message has been edited by jaylox (edited 12-08-2002).]

i need the pipe which you attach ya cone filter to! mass sensor not needed cash waiting

Had to take off my rhs boost pipe to the throttle body N/S to find a screw that got dropped amongst the plumbing. When I tried to fit it back on again the throttle body end got all crumbly and bits broke off. So now its back on with duct tape to hold the boost. Not pretty but it works. Nissan want silly money for these pipes. What alternatives? I heard of Samco. Willie

Japanese Gt championship showing NOW on Motors TV, you lot with sky go and watch its normally good fun watching soups, skylarks, NSX's etc with 500bhp battle it on the track