General Discussions - 300ZX Related

Sorry if it's been asked a loads of times before but I'm new. Seen a set of 19s that I want and I just want to check the fitment, they're an 8.5" wide front (I know they will fit) but a 10" rear (concerned) also the offset is 32mm and I'm just not sure if they will go on without having to mod the arches. They are on 235/35 fronts and 265/30 rears. Help please.

hi guys, iam about to order some new scuttle panels from the z centre,but when i looked at the old ones,i noticed that there's a small rubber, i gather seal , that goes between the scuttle panel and the windscreen,unfortunatly the one on the passenger side is missing,firstly has anyone bought new ones and do they come with the new seal?or if not ,can i buy the seal seperately,if so is it only from nissan?cheers guys for your help in advance.

Hi All, My rear badges have been removed at some point, does any one know where i can get them? Prefer to be the original or copy of an original at least.. What were/are they? stickers, vinyl or metal? ah thankyou :hyper: :hyper: :hyper:

saw several lost looking zeds in canary wharf today-did you know where you where going :rofl: ;)

Hi bods! As part of the 60K service i'm doing the cam seals, or attempting! The seals are well and truly stuck. I've tried heating them, wd40, seal pullers (home made and bought) and now i'm stumped! They seem to be melted in place either that or the guy who do it last glued em in! :mac1: I think i'm gonna have to start stripping the engine down, but before i do does anyone have any ideas? Have no pics ATM but it's the intake cam seals i'm doing. Help much appreciated Cheers Pete

Does anyone have detailed diagrams of the vaccuum piping connections to these two solenoids (EGR and AIV) ? Cheers

Are these a good buy or better buying for uk? just in uk they are hurendace money and they seem resonable.How much would i gain from this? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=8048808057&sspagename=STRK%3AMEWA%3AIT

Hello, I've completly rebuilt my engine with wiseco 87.5mm forged piston. My compression are now 9.5:1 As I will change the turbo for big Greddy or HKS, I've been told i need to lower the compression ratio. Is that right? Why? And how can I do this? Thank you

seen a blue z today coming towards me on the a511 heading up towards maccy d's way.put our hands up and that ;)

i want to lower my car so are these any good. http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=4625707123&sspagename=ADME:L:RTQ:UK:1

I have recently purchased a pair of turboXS BOV's from Z1 motorsprt, I have fitted them, but as per title, they aren't dumping, I'm getting a nice lot of chatter fom the wastegates but no whooshing. please help!

Grey J plate droppin a chick off at wetherspoons in Daventry about 9pm ish. I have seen you once before coming out of Tescos car park but never when I'm in mine. Scrawni.

hi all i am a new owner of a 300zx tt and i have a Blitz LM off a 200sx s13 and i am just wondering if it will fit and what other mods do you think i should get after i have got it chipped. thanks

I desparately need someone reasonably local (I'm near Turriff) to look at my Zed. Its been with a cowboy for the last 6 months believe it or not and he's totally screwed it up. If you know of anyone experienced with these cars please let me know. Many thanks, Colin.

got it with the car, but is it any good? Would it be a direct replacement for the standard oc? Looks nice :cool:

Hi Folks, Put a new fuel filter on my J-Spec today and found a 4 inch piece of black tubing in the outlet of the old filter. It looked a bit like a straw but was thick enough not to bend easily, also one end was blown so that it would not go all the way into the filter. Anyone know what this is for, is it purely to restrict fuel flow or is it there for a reason. I changed the filter because when booting the car I kept getting a sudden loss of power under load (like you'd removed your foot from the accelerator), usually around 5000 rpm, in different gears (it's an auto). Ease up slightly and go for it again and I could get the car rocketing off again. I put …

Spotted in Castle Mall Carpark today.Hope you didnt get a flat battery leaving your fogs on.

Right I am looking into buying brakes (traders welcome to help here :) ) I am thinking about seeing if I can get hold of any brembo's for the fronts R33/R34, 350Z, Evo, Sti Scooby........ I know you need to get a bracket made up. I also know its an arse of a job to buy alloy wheels for our cars as the standard calipers are fat, how do brembo calipers compare in size thickness wise? I know you need to get a bracket made up. Would it be easier to buy wheels for? (next job) Whats the issue with interfering with the abs? do you get the vibrating pedal more frequently? warning light on dash etc...?? I have done a search but not really found anything concrete. C…

The car is chipped and I want to adjust the boost to around 0.9 - 1 bar. Only running 0.62bar now. Where do I adjust the boost. There is something at both sides of the engine that looks like it ment for adjustment of the boost. Tried turning it clock wise with my hand. No luck. Seems like it's turned down all the way... No problem turning it the other way though.

Fikin first time i have taken car out in the dark, pissing down and going straight on at a round about and a motor pulls out in front of me,lock up and miss by mm. She shouts at me "your indicators are on", got out and fick me they are. God know how the previous owner managed it. The lens is the old orange and clear type. I had my side lights on which in turn illuminated the larger orange part of the lens and then when i indicate the side light part flashes with an orange bulb. So god know if it`s a mod gone wrong or it use to have clears at the front, the front end is all original so i can`t see a accident replacement mistake. Surely they put it all back in the wrong pla…

How the f*** do you remove the bottom of the airbox without taking the front bumper off? Have taken the top two bolts out but the bottom two are underneath ther rails that run up either side of the box and impossible to get a spanner in there. Anyone done this recently? Cheers

for all the parts for an engine rebuild

I have noticed that some after market exhaust systems on our zeds have a balance bar between the two sides, what is the advantage of this?

I have managed to snap one of the (ridculously brittle plastic !) pipes (ringed) on this part when changing to silicone vacuum tubing. :headvswal Can someone tell me what it is - or even better let me know if they have one going spare ? I did a search on the number on it but didn't find anything. It is located on the drivers side (one of two). Any help appreciated... Cheers

Hello people, Hope you all are fine and having good times with your Zeds. I lost the head gasket on mine a couple of months ago.Managed to get it to the garage yesterday to get it fixed.The guy is charging me £1000 for the engine out work with the skimming tests and all.I just wanted to know is there anything else I need to keep in mind about and get checked out.I mean when the head gasket on a zed goes is there anything else that is damaged with it I might need to get the mechanic to have a look at.I'd appreciate any help and suggestions. thanks guys.