General Discussions - 300ZX Related

Red zed spotted on A5117 heading towards Ellesmere port. Spotted by the weigh bridge, had a small front number plate and possible a stillen/strosek front bumper!

I was planning on taking the z to jae tomorrow but not any more! It went in for a clutch and other bits on monday and i just got it back. Had full power before it went but clutch would slip above 5000rpm. Clutch works fine but i have no power at all! Coolant temp is normal, no smoke etc, it just wont go above 4000rpm, drives ok below that but the power is low. Its still making full boost and doesnt feel like its misfiring. Drives ok up to 3000rpm, i switched it to high boost and floored it in 3rd, it climbed to 3700 slower than usual then stopped firing on all cylinders, head about hit the windscreen. Tried to accelerate above 4000rpm slowly and progressivly and its just …

gonna take mine off and replace, cant find a decent pic of them anywhere or where they are on the engine etc.. anyone got a decent pic of what they look like?? i dont want to remove the wrong bloody thing !! thanks

left a calling card under ya wipers

weird! ive never seen another zed in rye ever, and today of all days, youd of thought everyone would be at jae, i see two of them!

Well my car has gone in for some bigger discs yesterday and was due to pick the car up today but my mechanic says when he presses the brake pedal it goes striaght to the floor!!!! :rant: He's tried bleeding the brakes but not much is happening... He thinks the Brake master cylinder as probably gone or got a problem with it i.e the seals or something have seized in vaccume or need turning the other way... Gotta wait till monday now to find out if it can be fixed... It was working when I took it in there!!! Any idea on here I could throgh at him would be much appreciated or if anyone has got a spare brake master cylinder floating around I can pruchase off them!!!

hi everyone just a quick question why when i go over 70mph ( on my private road Lol) do i get a bung noise :( , How do i stop it. Not sure if it is already on this forum already i did look but could not see it. many thanks

Hi all Just a quick hello to introduce myself. HELLO I currently drive a 300zx its a j spec. a G plate N/A T Bar atuo with full black leather with 14,000 miles on the clock its totally standard but getting a exhaust system fitted as the original has seen better days. hope to speak to you all soon. :bow: many thanks John

Hi all Just a quick hello to introduce myself. HELLO I currently drive a 300zx its a j spec. a M plate N/A atuo with full black leather with 14,000 miles on the clock its totally standard but getting a exhaust system fitted as the original has seen better days. hope to speak to you all soon. :bow: many thanks John

Hi everyone, I've had my Z for mearly 3 months now and I love everything about her except for the REALLY harsh ride. I know when a car is lowered on aftermarket suspension you should expect a harsher ride but when I say harsh I mean really harsh! It's harsh to the point that hitting a stone in the road nearly lifts the car off the road. I took the car to a mechanic guy I know and he had the car on the ramps and he said there are no problems with the suspension except for the fact that he said the setup was extremely stiff. The suspension is Tein coilovers although I've no idea which model etc. He told me the only way I can fix the ride is to completely replace t…

Does anyone know how easy it is to change the rad pipes top and bottom? can it be done without having to move anything else? cheers all.

Dear All, Does anyone have a a standard boot spoiler with stoplight they want to sell as this one has had it. Brought the car in direct from Japan in 2003 with known history from new (1990) and apart from the exhaust the car is standard. We are considering selling as it has only done 45 miles over the last 2 years which seems a bit of a waste. Have never posted on this site before so would appreciate the correct protocol for advertising. Cheers,

in the car park @ sainsbury - Saturday 22nd july @ about 11.30

oil smoke i think is bellowing from behind the drivers side of the engine. someone mentioned it could be the cam sensor? or something?

when i start her up from cold she idles fine but if i touch the throttle the revs drop momentarily and then rise as normal. once warmed up it doesnt do it... any ideas? oh and occassionally when i start it, the revs bounce around a little before settling at idle.

white streak passed us on a55 on wed night, sounded like mine as it had big single ex, then the prat under took an irish plated car, right behind a police car that had just passed me. Dont know if he got a tug as i turned off just then. Nice move mate not. See you all on sunday.l

Bought some Apexi BOV's secondhand a while back and took them to Ztech today to be fitted only for Ryan to find that one of them is seized... :smash: I know I should contact the seller etc. but does anyone know if it is possible to rebuild these.. was really looking forward to having them. :( anyhow got Koyo Rad and gauges to keep me happy :) Any help much appreciated. Cheers

I need my tracking sorted as it's really really out. But because I want new HICAS arms as well, with it all done together, it should be good. Question about 4 wheel alignment. If the tracking is really badly out, will HICAS try and compensate for it? My car when I start off driving has the wheel pointing offset to the center. After a few miles of +60kph, the HICAS light will come on and after another few mins, the steering wheel will return to the centre position. Bearing this in mind, when doing 2 wheel alignment, could this make the problem still worse if the rear wheels are on the piss to start off with because of HICAS? Also, is the problem entirely tra…

Hi all one of my z`s has been stood for a while only about 2 month have started her up now and again. went to move her abit but she is not letting me select any positions she is an auto i have noticed that when i press the brake you normally get a click but i`m not getting this any help please. cheers chris :headvswal :headvswal

Is it 3/4 NPT or M20?!?!?!?!?! Thanks.

Before i take my balence bar off what is connected to it? Is it all air or is there furl as well? Ta

fitted a Dett sensor without removing engine? If so, what's involved? Or must it be an engine out job?

Insurance - Bloody hell!!!! I am 31 with full ncb and the best I can get on a Fairlady is £515 third party fire and theft! Does anyone think they know of a company to beat this or am I too optimistic? Golddigga!

Are they rare?

Right, I'm getting my rear subframe polybushed when I get back from the states. Would quite like to replace the shocks as well if it all comes off. I have fitted Eibach springs on 2 previous cars and rate them highly. A, just wondering who's got Ebachs on their Zed and B, where can I still buy them from? Eibach shop's not listing them. Ta