JaiKai

Yeh, you could take the catagory away !

Yeh, unless someone with a 99 spec shows up next year I might win the same one again !

Thanks, found this out last night, !

yeh, Thought some closeups would be good since not seen any of the series 4 clocks !

Also managed to fix the front fogs too, not sure if there was a fault in the right side pod but when i put the series 4 pod back in which I had got mixed up with the old one it all started working again - not sure if one was at fault or maybe there are small differance between the two.

And finnaly after all was fitted and recalibrated heres the end results !

Righty O ! Its cluster time, today i stripped out my old silver zeds indiglow dials and put them in the new black zed, so why did i just not change the full cluster over I hear you say ! Well, Nissan decided to change the cluster in the series 4 which the black z is so the cluster from the series two wont fit, there physically different on the back and inside. Heres a shot of the series 2 cluster. And here is the series 4 cluster. Spot the differances ? The indiglow dials were stuck down with double sided tape to the originals so easiest way i could think to get them apart was running them under boiling water for a few minutes which worked great. Below is the series 4 cluster with the indiglow fitted, i had to mod the oil guage to get it all to fit properly but they do fit eventually, i just trimmed down the overlay very carefully as not to damage to out circuit on them which powers them up. Heres the front part re attached before I put the case back on - looking good so far ! And heres with the front put on too When fitting these back into the car I actually had to take the face off again then try to calibrate the dials again - luckily i've got a consult cable to see the actual guage readouts from the ecu.

Bets you spent less money at JAE ! £2 for a new cup !

email is lee.young@jaikai.co.uk Tell us what dimensions you want ie 600 x 200 Try send higher definition pics as poss Lee

Send some pics to me and I'll do it ! I'm a pro with Photoshop !

All the best del, have fun !

Good luck to you and the future mrs del !

So - the weather settled down again and i managed to fix the side lights and also re attach the indicator lights - now all thats needing doing is to discover why the front fog lights dont work - total puzzle to me !

Yes, its KH3, but it looks hell of a more shiny than the rest of the car.

It started to pour down again at this point so i never managed to refit the front fogs and side lights, they dont seem to work anyways. What does work is a side light bulb which is part of the front fogs and this turns on when the side lights are suppose to be on. Other than that I have no real side lights or fogs. I've checked all the fuses and they all seem to be fine, could it be a faulty relay ?

Front bumper time ! The old veilside bumper came off fairly easy however I think its a scrapper as the bottom part is missing and theres a few splits at each end. After the bumper was off I had a wee look at the cabling situation for the front fogs and side lights, it seems the original loom was butchered to fit on the other bumper, also i've got a fault with the side lights as at the moment they wont power up. I originally thought this was because of the bad wiring but after I put everying back on to test they still wont work. Having spare plugs I decided to do a proper patch job and I resoldered and heat shrunk some tubing over the cables to protect them. I see that there is three cables going into the side lights and front fogs, can any body tell me what the dual purpose is for ? I decided to carry on for now and refit the lamp holders. then pop the bumper back on.

Always liked the dark powers of the force !

Not knowing how advanced the user is delving into the linux world might confuse them even more. One can do all sorts of harm in linux - I would take it to a tech to be safe or other option is to pull the hard drive and plug into another system to get the stuff off it.

not sure what it says no bootable partition in table unless you have deleted something your not ment too ! does it say that after a reboot ?

Yip, and your hands and anythin else you touch !!

DumDum ? never heard of it, i used the black tar stuff thats used on windscreens.

By the time I finally fitted the back bumper it was pitch black outside so these are the best shots of the bumper back on. The shine of the new bumber really shows so i'm going to have to give the car a good hose down and wash tommorow so that is doesn't look as bad. Too late and dark to start on the front so will leave that for now :

My 99 spec bumpers were preped n primed yesterday and today they were finnished off ready to be fitted. Here they are sitting on my grass just before going on the black zed.

I would never share that sort of pics of my wife, There's a limit and that's a line I won't cross - at least not without her permission ! lol

Can we do a group pm and put it to a vote, I'm sure we would all like to vote On the ones that are not suitable !!