JaiKai

If anyone wants me to make one send me a hi-res pic and i'll post it up.

That's 30 so far, one more to go but its so damn obvious i'm not going to bother with it. Bottom left corner there is a few pipes.

Didn't think anyone would have spotted that one. :)

Few to go.

I'm sure he will be tapping his shoes all the way to heaven as long as he's played his cards right. RIP Buddy

23 down, I think there is 6 left.

15 down 15 to go

Alot more in this one, well at least 30 !

got it !

yip

Need to make the next one harder.

one to go :)

Think there is only two left :)

:) At least 7 or so more.

For all those that are bored like myself at work heres a spot the difference. 6 more of these to come if you all like this one.

At that speed just stick your hands up, much better feeling.

Don't need them, personally I think they are pointless and just creates an area that's hard to clean.

Done.

No, lol, going to try avoid them.

Don't you just hate it when you lose your clutch pedal.

And we have touchdown.

Slight panic then an adjustment to the hand brake shoe I slipped the disc on for measure. Then popped the calliper on. Only need to properly attach the brake lines then wheels on. That's the first job for tomorrow morning then I can finally get the zed off the ramps to work on the door rubbers.

O' what a day. Its been a long and hard day but I've managed to get 90% of the back end reassembled. Starting off with the pain in the ass knuckles and hub I made a few rookie mistakes getting them back together, first I lost the bolts, then I got the left and right sides mixed up then I put the whole lot together again and left out the handbrake / metal dust shield that needs to be sandwiched in-between. More time wasted on these hubs than the time it took to do the rest. As I've got big brakes I drilled out the spot welds to get rid of the outer shield part. Before I put the hubs back on I attached all the new parts to make it easier rather than grapple each part as I went. All bolted up now and ready to build the hand brake shoes. I must say every time I mention I job I don't want to do along comes another. This time it was the hand brake shoes; even with having an actual copy of the manual they are a royal pain in the tits.

Its been 4 weeks nearly since the rear hubs were removed and the knuckles dismantled. At the time I had real issues getting the bushes off but after much bashing in a vice and the help of a blow torch I've managed to burn the bushes out and also press the two hicas ball joints out too. Not the nicest job I've done and I've plenty of cuts and bruises on my hands to go. Both knuckles are now de bushed and ready for a clean up. Stuck them in the sand blaster unit and they come up nice and clean A little bit of grease to assist and a rubber mallet helped get the new poly bushes in place. Still got two to press in but left them at home so that will have to wait.