General Discussions - 300ZX Related

http://cgi.ebay.co.uk/1992-NISSAN-300zx-FAIRLADY-TURBO-RED-up-to-680bhp_W0QQitemZ180437760641QQcmdZViewItemQQptZAutomobiles_UK?hash=item2a02edba81 Is this worth all that money???

I've been reading through some of the seat belt retract problems but couldnt see anything related to a UK car. The drivers side one is very slow to retract and was wondering is there a diy fix for it?

I love this, I have been thinking seriously about buying it and shipping it over. http://www.lastinterceptor.com/sale/08/

Further to my post re rear passenger footwell damp, possible cause a blocked rear targa drain pipe. There are many posts re drain pipe for targas but nothing for the rear. Firstly remove the targa, and the lower interior panel below the seatbelt, also it makes easy acces to remove the rear seat. Remove the complete seat belt mechanisim, to locate the pipe. This was the culprit, it should be a complete length, but mine was only a half, so would drain directly into the bodywork and out of the hole that should have the pipe through it. Something missed by Nissan i assume. The next bit is pain, using a 2mtr length of wire, i managed to feed this u…

Just seen these on z32-zone, i think they are horrid!!!!

i want to get his lordship some car mats for the zed for crimbo, need to have red trim, where's best place to get them? thanks :)

Not seen this video for a while, I`m sure this is a repost, but good zed porn if you`ve not seen them in action!!! I`ve just found the original video in my dvd rack at home, impressive stuff:bow:

for sending and giving me free of charge parts for my Zed nice one buddy.

nice tidy red zed j240 fge. looked nice and clean

hello everyone [again] my mate come see me with his z, running a bit funny, when looked at throttle position sensor,the opposite plug to the one you pull apart to reset tps, as only 2 wires going to it, every other z looked at as 3, pulled covering off loom as far as i can go back and cant find no 3rd wire, anyone know if theirs a wiring diagram anywhere any help appreciated, thank you

hello every1 found 3 nissan ptu in boxes in my garage they are similar to mine on my k reg tt, as in wires going in both sides, but off the top off my head the plugs look slightly differant to mine any1 got any pics of a series 2 ptu thank you

Yep this isnt the usual 'my targa is leaking', more of a where does the targa pipe discharge? Passenger side, to the rear of the targa roof, is a drain hole, that should be attached to the pipe and drain to below the sill. My rear passenger footwell is showing slight water. have checked all the targa rubbers, and all is good. the top of the hole is clear, but i cant work out where the pipe should discharge under the sill, i know it follows the pillar behind the card in line with the seat belt. I think its either blocked further down or perished somewhere between the targa and the sill, Is it one piece of tubing or two? and where should it come out.

....This would be a nice Zed, if it wasn't for the Boxy front end, and the Airfix Stickers. What front end is that anyway, is it a custom jobby??

That low winter sun really gives off some strong light!! Took some piccys today........ Still not sure if my fronts stick out too much! Chuffed with the wiper and squirter removal though! Polishing really paid off looking at it now. Bonnet catch looks really green! That's being painted black tomorrow! All the prep work I did on the balance bar before chroming seems to have paid off. 3 connectors next to the fuse box are now an eye sore. They will be tucked away tomorrow! Scuttle panels, battery connecters, suspension mounts are next to be sorted when I have the funds - hopefully…

Does anyone want to buy a unique 300zx SPYDER - There is only one in global existence!!! This one-of-a-kind 1991 Nissan 300ZX hardtop convertible was custom built for the 1992 Geneva Auto Show by ASC as a possible production-ready version of a 300ZX convertible. Of course, you know that Nissan never built a hardtop convertible, instead preferring to go with a traditional folding cloth top, but..... you can have this one for about 50KUSD Link is here - good luck: http://cgi.ebay.com/ebaymotors/Nissan-300ZX-ASC-2-2-Only-Nissan-300ZX-2-2-Spyder-Ever-Produced_W0QQcmdZViewItemQQhashZitem414a69b2abQQitemZ280421315243QQptZUS…

someone mentioned a company that does this the other day, but I can't find the post anymore (I think it may have been in tigerpoeton's thread that has been deleted). Anyone know who, if anyone, does it? Thanks, Phill

Up past the Whifflet, Silver, rear spoiler removed, Nice rims, Aroumd the back of 1.15 pm ??? Alan..........

Been a long time since visiting Zedworld but nothing's changed. No matter whether its a massive job (like last time I visited ) or just some advise like this time.The service is always fantastic , 1st class and friendly. Can't thank Jamie enough for his diagnosis and setting up the motor today,it was great to chat (brilliant bloke).He's just like Jeff,always ready to help and not rip you off. "You must be proud of him Jeff ". Harry (Little REDZED) come along too and loved every minute of it, I didn't think I'd get him away,think he'd live in a Z if he could. Hope we can make it to the Christmas meet as would love to meet members as you've all been s…

http://cgi.ebay.co.uk/Nissan-350z-skyline-200sx-300zx-Turbo-whistle-ANY-CAR_W0QQitemZ220518056411QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item3357e681db Hope you like. Just like have a card and a peg on you old push bike...

Got the replacement MAF yesterday and got it all fitted so now the rain has finally stopped got a few videos done. I will get some more done in a better location and with less traffic soon. still have the Q45 to fit and get mapped as well as turning the boost up as currently only 11psi! The car is frighteningly quick :shock: Enjoy, comments welcome.

can some one please tell me what this belt is for and also what the things its attached to do (if that makes sense) sorry brain isnt working to much alcohol last night! thanks :)

Im fitting hks adjustable actuators and im not sure which psi to calibrate them to?!?! was thinking 10-12psi? If it helps they are the same as the jwt530bb or the z1 gt535r anyone have these turbos fitted? do you know the what the actuators are set to or even what they boost to at base pressure?

Posting here so as not to clutter up his for sale thread. Really supprised to see this, has to be the most unique Zed in the UK finished to the upmost highest standard. Whether you love the looks or not you cant deny the quality and time gone into making this car. Hope you get top money for it (know you wouldnt sell for anything less anyway)

Hey folks just had a look at the wiring diagram as my passenger electric window isnt working on both switches but the drivers one is. Am i right in thinking that they both run off hte same fuse so its pretty much gonna be the motor. Cheers Marty

Found a few pics of a 2000 300zx, up for auction in Jap, i like the wing mirrors with the indicators set in!!! VERY NICE!!!