General Discussions - 300ZX Related

...one that isn't cracked, broken and soaked with power-steering fluid like mine is? If not, what's the part number and how much is Mr Nissan Dealer likely to charge me for one? BTW: That's the undertray that catches stuff that gets dropped behing the radiator :-)

I really need those. I've heard you get 20HH gain and is really noticable

and is now on the admin board for the 200sx club

Whilst some of the recent comments on the 200 forum make for interesting reading this is just fu**in' stoopid, IMHO http://300zx.co.uk/200sx/ubb/Forum1/HTML/001849.html Comments guyz - the 300 group can't possibly be allowed to degenerate to this level. Or is this off topic? Tim [This message has been edited by TT Tim (edited 19-10-2001).]

I ordered these items for my 91 UK Z (perhaps these will still fit an import / different year model): - Front Wheel Bearing - Oil Seal - Snap Ring (The three necessary components needed to do the job, except for a hydraulic press) I ordered this but never needed it (I had the hub replaced). Make me an sensible offer and its yours ------------------ Simon

Cool. Version 4.5.0110 Does any one want it? Its been leaked from Micosoft Stuart

The only way I can find out if my speedo if duff or if some wireing had gone a stray, is to try a working dash. If works its my wireing, if it doesnt its my dash. Can anyone assist? Stuart

Finally finished fitting my new stereo and must say i'm as pleased as a dog with two dicks. Got 6" component infinity perfect series in the front, 6" component infinity kapa series in the rear and a nice 6 channel amp to run this little lot and the 12" sub in the boot. Most pleased although it was a real pain to do. When is the next meet up. Havn't seen many Z's recently. Tim

Hi i would like to have a quick spin in another auto Z to compare gearboxs,mine seems to be running great now engine problem sorted,but nissan plug in says otherwise. I could meet you anywere you like in Derby maybe sunday.If you can help great.

Craig, I think we might need that General & Technical forum soon, Dave R has got the right arse over on the 200 board and is cracking the whip big time. Don't think it's wise publically displaying everyones I.P. though, isn't that illegal? See the thread here... Hope we never get to this point!

It's 'kin pissing down (again)! Wanted to fully clean car before it's first appearance at work... Had a few things done since I bought it Cat 1 fitted De limiter Cd changer Just received private number plate (can't fit until it stops raining.. Oh yes and - whale tail spoiler scooby bonnet scoop red pinstripe down sides turbo sticker on front, back and wings motorsport sun strip re sprayed alloys white m3 mirrors (with green tint) simpsons car mats halfords fake leather car seat covers.....

I was gonna drive Z..... ...But I got high...... OOOOoooooo---oooooOOOooo I stopped in my front room and I know why... Yeahh--ehh..Cause I got high, cause I got high... ....la da da da da da aaaaa...... I got in my Z to drive..... ....cause I was high..... I was gonna stop for the police.... ...but I was high.... I thought I could out run the cops, and I know why.... yeeahh--ehhh...cause I was high, cause I was high... OOOoooo---oooo Cause I was high, cause I was high... (what no spliff smiley)....LMAO Matty. ------------------ Bounce...Bounce...Bounce...Bounce...Boun…

Just been over on TT.net, COZ I COULDN'T GET ON HERE! LMAO I think this is the same guy I posted last week, stock bottom end Soup, six speed with single plate clutch. Anyway, the guyZ on TT.net are impressed, this guy, SW, has just done a 1/4 at 9.81 secs @ 153.8 MPH!!! What the fuck has he done to that thing?

Does any one know any good scrap yards that will have 300zx stuff. I think my dial is knackered. It words and then doesnt. It seems to work at higher speeds. I want to replace just the speedo. Any idea where I can get one? Stuart

I went across some right dodgy road by mine about 2-3 months ago, full of deep pot holes. I have to drive over them as they are outside my house (near as damn) I done some damage to my Air-Con compresser (that's wht I told them anyway ) This morning I had a cheque for £220 from my local council And also today they are relaying the whole of my road.....now that's what I call service! Just thought I'd share my 'Happy' story. Matty. ------------------ Bounce...Bounce...Bounce...Bounce...Bounce...Bounce...Bounce... (sorry no sound!) LOL

...Part 2... Me: "Yep, sure does Matty, hey what's going on? Johnny has morphed and shown us all what a mean mother he really is...so that's what's under that cap!!!" Matty: "Ohhhh these guyZ really mean business, but the MAC has morphed aswell Tim, this is incredible...showing his true Sottish self now...this will be a bloodbath!" Me: "Oh nooooo, this is getting outta hand Matty, MACCA or should I say Nesseeee has just tail grabbed one of the GPS girls, Johnny will not be a happy bear now!" Matty: "Johnny from GPS is not impressed and is playing the MACCA at his own game...check this out viewers...incredible..." …

Me: "Good Evening folks and welcome to tonights special edition of Zelebrity Death Match...I'm Tim Turbo and this is Matty 'TopSquads' Lloyd..." Matty: "Good Evening Tim and to our viewers of Zelebrity Death Match, so what's in store for us tonight Tim my old Death Match colleague?" Me: "Have we got a treat for the viewers tonight Matty, tonights match is against two formiddable opponents! Here they are now..." Matty: "...and here he is, heeerrreeee's Johnny!!!" Me: "Johnny from GPS no less who is rumoured to have upset our next opponent and has challenged him to Bring It On!!!" Matty: "...and here's MAC1 all the way from Scotland, he …

I just finished replacing ye old centre bearing and gearbox mount. The centre bearing wasn't to bad, just off centre, and the mount had sagged about 15mm, cause I had to jack the gearbox up that amount to re-fix the support bracket. On driving my car feels totally transformed so smooth and no clunking or bad vibes. BOOOYAKASHAAAA!!!!!!!!!!!! cheerZZZZ Jonny......

Open Q. to all IT techeads. I have checked my email to find 3 emails from an address I don't know. All with attachments, they are called: Deferral request cat. k 16.8.00.doc.bat DURUM WHEAT RECORD CARD.doc.com HINZE 57.doc.bat The emails were also all accompanied by the following text file: Hi! How are you? I send you this file in order to have your advice See you later. Thanks Anyone come across this? The email address was: matt@harlow-ag.co.uk Your help would be appreciated. Thanks Tim PS These are obvoiusly PC files and I run a Mac system.

For those that haven't seen one of the nicest Z's in the UK! IMHO! Thanks to MAC1 a.k.a. Iain for the pic that I've been looking for for ages now...top banana!

I have loads of these and I suspect that this thread will either be embarassing or very funny. A couple of my own little challenges : 1) Car Park Barrier. To get into the car park at work, I have to swipe a card through a card reader to get the barrier up. I am not allowed to stop moving forwards while swiping the card through the machine. 2) Indicator matching. If I'm sitting behind a car with indicators on and have no passengers then I have to flick my own indicator on and off in time with the car in front and mustn't get out of time ? 3) Motorway lane changes. I'm not allowed to touch cats eyes. 4) Wipers on intermittent - I have to predict whe…

Hi All Im in the process of searching for some new rims for my Z. The size available in 18's for the rims i am after are: 8 x 18. Does this size fill the arches well and without any mods? Also, can the car be lowered with 18's on it? Also, what is the offset for the Z. What size tyres do you guys recommend? CheerZ

Right, I can use the Kirk for obvious reasons...this one is a blast! Last Friday on me way home I was on the A5 which is a lovely fast section of road. Loadsa round-a-bouts to navigate and dual carriageway on this stretch. So the order of the day is usually, cain it...slow down sharpish...round-a-bout...cain it...slow down etc. etc. You get the idea! Anyway, Kirk is in need of some serious servicing and is behaving like a naughty school boy at the moment! NOT GOOD! I'm on the inside lane approaching a large round-a-bout thingy, two young and fit girlies in outside lane in VW Golf, we get round the round thing and I'm in inside lane coming up on a car r…

www.groupbuycenter.com

It has just occured to me that all the truble i have been having,ie changeing a perfectly good PTU ect,that the problem only happend the day after i cleaned my engine bay.You see iam thinking becourse today i had my Z pluged in at Nissan,they said as well as the line pressure solenoid valve being one option,they also listed that there could also be a harness or connector problem which is alowing the solenoid circuit to remain open or shorted. So the question i would like to know is there any solenoid CONNECTORS in the engine bay that i may have disturbed.I need to know this before i comence with any gear box spesialists(sorry cant spell)Thanks for thouse who have helpt…