General Discussions - 300ZX Related

Hi People, does anybody know whether the 350z rear discs fit on a 300zx?

Is there a difference in the early steering wheels and the 96 steering wheel. Mine car has an aftermarket steering wheel and going to put it back to factory original Some idiot put a push button on the left had side of the steering column cowling where there seems to be a hole for another stalk. I assume this was taken off. It must be for the cruise control as I cant see any functions for it. The car is a 96 lwb.. thanks (any photos would be great)

The abs is giving trouble on my 90 tt swb, I have narrowed it down to the control unit. I've a 96 na 300zx that's a breaker, I looked behind rear seat but couldn't see the abs unit, question is have some zed's no abs or am I looking in wrong place?

What's this pipe for? It runs to the block then goes off to the clutch cylinder Is it needed? I plan to run a single pipe down to the clutch cylinder and do away with this bit of the pipe

Here its on the transporter to me. Should have it tomorrow.

ant got loads a money but would like to just upgrade my brakes cas there just shocking if im honest. like i say poss go look for some bigger secound hand calipers and disc but dont and wont spend 800 quid on a new set up . what u guys got for what and were to find. shall i ring up the breakers when me gets home or has someone got some stuff they maybe havnt fitted yet and could do with a bit of cash for there mothers daypresent, bless, cherrs any helps much appriciated of course.

I'm gonna be fitting hid's for my dipped beams.....but what do I do about the front fogs? they are old school yellowy colour...do I need another hid kit or is it just a specific bulb required?

Can someone please remind me of the bulb spec for the dip beam on a Jspec, is it H1bc? And any HID kit recommendations? my ageing eyes and the standard candles mean night driving is terrifying these days!

I have made contact with the guy on ebay that can supply these parts, Steve is his name and his ebay name is littlebird1303. You can make contact via this link, http://www.ebay.co.uk/itm/231176129801?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 Paul Steve has got back with these price's, £60 each for outer sills and wheel arches and £40 for the inners.

i cant get any pics cas im away and the transport bloke drove it straight into my garden up against a fence and my miss dosnt want to move it or touch it so sorry guys no pics for two more weeks,. also that said i surpose the best place to buy one perspex strip will be luke ate the z center i guess. oh and yes ian as soon as im home ill send you the other one.

I have GT525 turbos, if i remove the dump valves completely (dont have a set of recircs) would my turbos be able to handle the extra strain when they stall as the butterfly closes? Second question. My after market boost gauge, is now reading just 10psi on full boost, nothing has changed, no settings have been fiddled with and the car still feels like its boosting at 18psi, yet the gauge is now showing a max of 10 instead on full boost ? There is no det sensor wired up, so cant see how it would be in safety mode, though i will check engine codes just to make sure.

Can I say a big thank you to Ian and Ian jr for helping me find a decent car. They have taken time out of their own lives to help a fellow person on the forum whom they don't know but have the courtesy to help a stranger out. Well if there is such a thing as karma, both these guys deserve bucket loads of health wealth and happiness. Cant thank you both enough, so hopefully this thread will show some appreciation of your friendship and helpfulness. Hope to actually meet you both soon. regards and best wishes Derek. someday I hope I can repay this to you both.

Does anyone know where I can source replacement sills from? Mine are knackered and I need to source the pannels then call in a mobile welder to fit them for me. Many thanks Dan

Hi there can anyone tell me the part number for a cam belt kit for a z32 n/a 1990 auto, I got one off eBay part no ktb683 they say its the same as the one advertised which was out of stock but I told him it is too small and I got told its the right one according to his books been going on for a week now, thought if anyone would know its you guys.

As some of you will know Im looking for a good lwb (preferably) z with no rust and in good / mint condition, na or tt not a real issue. I've a very helpful friend looking at one this afternoon for me, but after getting a pm about one here in N,ireland, now two have popped up for sale. Just typical. so might have one bought before the weekend yet!! http://www.gumtree.com/p/cars-vans-motorbikes/nissan-300zx-fairlady-targa-lwb-22not-bmw-audi-mercedes-subaru-evo-volkswagen/1052931459#photo-content http://www.gumtree.com/p/cars-vans-motorbikes/300zx-30-v6-derry/1053133298

Quick one... when u guys swap out your steering wheel, do you / can you adapt cruise controls to the later stalk type?

Who has Non-Standard Zed seats and what are they plus pics..

Anybody done this or do ya usually just paint em, got my slicky in a thousand bits and want to freshen up the rocker covers, I'd rather powder coat but there's wee plastic bits on the inside of em which I'm guessing won't agree with the oven!! Any advice appreciated! Sent from my iPhone using Tapatalk

theres a few things that im gonna have time to look at this weekend so I just wanted to pick a few brains beforehand, my oil pressure sensor has been replaced but im still getting a low reading when started from cold its just below the 8 then once warmed its always just over the first digit after the zero someone on here said it could well be the actual cockpit instrument panel that may have corroded? If so how hard is it to remove the instrument dome? Secondly . my steering wheel moves from left to right you can physically shift it from left and right this has nothing to do with turning the wheel had a brief look under the coloum and it appears theres a whi…

Is he still hiding? Lol!

Red UK TT - Eggbridge Lane cross roads, Waverton around 5pm

thanks to lee dent for sending me the diff bushes inserts send me em for free i throw my old ones out when taking the old diff bushes out there only little metal cups but with out them i could not get my rear end all built up

Hi guys as some of you know I bought my first z only in January this year, I loved it so much I've just put a deposit down on a twin turbo one and picking it up next week :) therefor my old one must go, it's a lovely car but I can't afford to keep both. I've advertised her for £2999 on here in the classified but now I've dropped the price big time to just 2k! The links below if anyone's interested please let me know and pass the info on to anyone who you think may want her. The quicker she goes the sooner I can begin tuning my new turbo!! Cheers guys!! http://www.pistonheads.com/classifieds/used-cars/nissan/300zx/nissan-300zx-n-a--reduced-must-go/2107495?isexperimen…

Hi, does anyone know if coilovers for a z32 are compatible with any other nissan? If so, which ones? Thanks

Does anybody know what the best high temp sealant, (instant gasket) to use on the exhaust cam covers ?