General Discussions - 300ZX Related

i'm in the process of installing the seals i got from Chopper. i've taken the drivers one off & tried fitting it - but for the life of me i can't figure out the A-pillar part between A and B. I can see where its Ment to go - i.e in between the Interior A-pillar trim & body but i cant get it to hold - it just droops down :rant: Any ideas guys before it starts pissing it down?? J

Just wondering if anyone is running a similar set up to my proposed one or if anyone could give me an approx bhp figure for these mods. The car already runs a trust system and k&n panel filter(soon to be changed to apexi intake). To this i would go for stillen headers, underdrive pulley set to release some bhp then from what i have heard a greddy e manage and a trip to thor racing is worthwhile. Would i be right in assuming that these mods on a good healthy lump would see 250 ish @ FW ?

Just wondering where the wastgate actuator valve is located as i have just bought a limited edition black apexi avc-r boost controller and also where do i fit the pressure sensor also when all fitted what boost can i put it up to with out knackering anything up Cheers johnboy

Lord of the Manor roundabout, Ramsgate just now only caught a glimpse as you passed me on the roundabout going the other way, didnt get a good look at the spec. Anyone on here?? Paul C, do you know it m8?

im after a Stillen GTZ-R front bumper who sells them in uk

Thought it was Grovsie as was going to say hi, but was definatly not Grovsie.

Just driven back from a friend's and the speedometer has given up the ghost. All other gauges are working fine, but speedo is stuck on 0. Consequently the steering has gone heavy, and then the HICAS light came on after I'd driven a mile or so. Now I know I've read something about this before but having done a quick search can't find the relevant thread. Is this going to be down to the speed sensor, or is there something else that might have bought it? And if so where is it, how much is a new one, and how difficult is it to replace? I've got a Series II '93 Manual TT. Strewth, these cars, sometimes, and only sometimes, it does feel like one little thing after another.…

Hi, Has anybody had a problem with Datascan not connecting? Everything seems to be ok, but not getting any connection with v1.3 and v1.4?? Cheers, Bart

who does the rear light kit that t pot has just fitted? is it a hard job?

I was in my black Zed as well on my way to Halfords.Around 715 pm. It looked like Paul Stevens.

hi guys, when i first got my zed i took out the center console to fit the stereo and found that the the plastic bits which the console fixs to have pretty my shattered and such. any ideas if replacements are available?? cheers

Checking out the Sixth form girls were we? lol or my zed haha Nick

Me again! Can i just say now before my next question, thanks for all the help you chaps have been giving me so far, im new to the Zed and Turbo scene, so i do have loads more questions to come too!! ok, i have a totally standard '90 TT Auto - can i still turn the boost up with a manual boost controller - and whats the safest level of boost a stock everything can take? thanks v much! :bow: :bow: :bow: :bow: :bow: :nana2:

right had a creaking from the front passenger side for a while. which i put down to the upper link arm.... now ive done the usual searching the forum ect i now have a clunk from the same side :headvswal now there seems to be a few culprits which ones are most likely tension bushes? ball joint? swap bar bushes? spring? shock? also the linking bar from the strut to the swap bar i can move the assembly by hand but can't get it to cluck is it normal for a bit of play there?? this is doing my head in and i have an mot looming!! :nelson: thanks guys n gals gaz

Not bad, taken into account, i have no patience, one broken elbow and now a cut finger

anybody got a link of where I can take a feed off for the temp guage have done a search but didnt find out cheers

This is a hoot. I am in my ZX waiting for the RAC van as i am very sure my clutch cable has snapped. I was fortunate to breakdown next to a house that has an open wireless switch so i can post this message lol. How easy is it to fit a new clutch cable? Thanks.. Scott, marooned but not out of the game yet

why when my zed is up to temp, that when i put foot down the temp gauge goes down to cold (not all the way down though) then goes back up again

Blue Zed (No, ZX MAD it wasn't you :rofl: ) spotted today in Purley Way about 1:40pm. Not modded but nice wheels :) Tara

I was changing the discs and pads on the front the other day and found that the front pass tyre had eaten itself on the inside. I mean EATEN. The rest of the tyre was fine. This is obviously wrong and I need to get it fixed asap. Anyone know how and what it should be? I gave 17 inch Work alloys.

You used to have a Black one with crash damage on the drivers side. I got my Gun Metal gray one last summer and live down your road!!!

Black - J plate at about 9:45 this morning (Fri 17th) - was it you Gary??? I was in a Dark Blue VW Sharan having just left Wattisham for the 230 mile journey home.

I went to Timpsons the key and shoe shop but they said they could not copy my 300ZX car key. Where can i get it copied? It does not look that different from common car keys. Not like some german car keys that have a windy channel cut into a rectangular stick of metal.

Danny - sent you an email from your website about details on the brace but havent had anything back from you except from the automated response. Shall I give you a ring? Basically I'm after a price including postage and also if you have them in stock! Thanks.

Hi guys ive just come back from working in Spain,but before i went i decided to do a manual auto conversion,(amongst a load of other stuff) anyway its all back together now except i cant find which wires are for the starter moter inhibitor switch and the reverse lights.Can anyone PLEASE help? Steve.