General Discussions - 300ZX Related

All the best bud :duffer: :duffer: :duffer: :duffer:

Have a really nice one Shel,hope Chris gives you the day off LOL. :)

sqeals like a pig and t.b.h. looks a bit knackered anyway,my car is going in for a full sevice inc all engine belts on tuesday but being an impatient git i want to drive her this week and over the weekend rather than use my s-max(coz i am the original kid with a new toy)so methinks if i just cut the old belt off and use her minus air con for a few days it`ll be o.k. but i thought i`d better ask the more learned bretheren on here am i thinking clearly or am i a total plum? answers on a postcard to.................. is chris a plank or not? c/o 300zx site cheers in advance chris e boy.

i was in coventry today i think it was allssley or assleys anyway it was a black k reg looking very nice and standard with 300zx sticker on small side windows

Hey guys and girls Lots of smoke at the W/E so took it into the garage and low compression on number 5, full of oil. Its coming out tomorrow to get the full picture. Gutted once again! Hey Ho at least it will be fixed when I get it back I guess. Any tips for what to get done while its out? I was going to get the engine bay steam cleaned and get the heater matrix replaced. Its got wiseco pistons and 555's is it worth investing in after market rods or are the standard ones up to the job? Cheers

Fantastic looking Zed, black with gold/silver rims, guy driving with a high vis jacket. Nice car!

My speedo and rev counter work fine ,but i have a problem with my milage and trip meters not working since this afternoon . Its an n/a import with a delimiter / converter fitted , so what's the problem ? speedo cluster or delimiter ???? It was working intermittedly for about two days before giving up.

Now i have seen a few posts on here saying: To get the engine out took the good part of a morning, or spent the day taking the engine out. :( Ive just spent the second day on it and i still need to seperate gearbox and then disconnect the wireing loom and then lift the engine out. Hard graft. Respect to you 300zx gods :duffer:

Anyone know if it's possible to compression test an engine not in the car??? If it is possible how is it done, I have a tempoary engine to put in the car and want to make sure it's ok before I spend a few days doing it. I know I could take the heads off to check pistons/valves etc but as it's only tempoary I would rather not!

I bypassed my det sensor with a resistor about 6 months ago and got rid of the code 34. I have had a new engine fitted since then and have been told that the sensor was working fine on it before it was removed from the other car. I was at Zfest the other week and was told that with the resistor fitted it will get rid of the error but the ecu will still know the difference as the sensor normally gives different resistances, not the constant 1k ohms. He also said that it will still run safty boost and the timing will be retarded. I have a boost controller which overrides the safty boost but I'm worried about the timing being retarded due to this. i asked him to ch…

Just got the car back after full engine rebuild and is now fully run in. I am now up in Glasgow and looking for any recommendations for a rolling road in the area. I used a company called AVA about 10years ago and would like to know if anyone else has used/recommends them? Or any other rolling roads in the area?

I have a jap import TT and am travelling between manchester and newcastle three times a week in it. I thought it would be a good opportunity to try out a few different fuels and driving styles (eg 2000 vs 2500 vs 4000 rves most of the way) to determine the best mpg. Only problem is thats its an arse to keep converting litres per kilometer to mpg - anyone got a good link to a site that will do this? the firs half dozen i tried on google have been crap. I have had two runs already and the MPG changed from 27 to 21 just by switching fuels! Hopefully the data will be interesting - i might post it up after a few months. many thanks

hi, has anyone got some form of guide for fitting one of these, its a Blitz SSDC R spec boost controller, I was hoping to use the write ups in the FAQ section which has fitting a greddy controller as a rough guide but the links / pics dont seem to work anymore, my car is a 1993 UK TT Auto Any help greatly appreciated Thanks

Hello, I have just had a GReddy Profec B Spec II boost controller fitted to my motor by Z-Tech however it wasn't setup and I am now trying to get this sorted. I have read the instructions and understand (mostly) what each parameters varies. I have also used the recommended settings posted on here a while ago, the problem is however I cannot get anything above 10.5 PSI no matter what settings I use. Does anyone have any ideas as this is frustrating after spending big money on something that is currently useless. The car also has just had BOV's fitted. Lloyd

does any one have instructions on the old style apexi AVC-R , i think the model number is 9405 its about 4 inches wide and an inch tall , it came with my z and after going to the apexi web site i still cant find a hand book on how to operate it . if i just turn the power off will that afect the running at all.thanks guys and gals :cry:

Your PM is full mate.

Does anyone know of, or have, a decent photo of the front suspension taken from the underside (like they do in the Haynes manuals) Even one showing all (well as much as you can) of one side, as the other side would be a mirror of the same. Anything appreciated, with thanks, Dave

Hi Guys and Girls Just thought I'd tell you about some exemplary service from Zedworld. Some of you will know about the water loss problems and the carry back off the M40 after the blown replacement Rad. Well Geoff ordered a new all metal rad and was told it would be here today, Well it wasn't so Geoff lent me the one from HIS Zed.... and said when mine arrives he'll call me and swap them while I wait Can't beat that for service Thanks Geoff... You're a star Tony

http://cgi.ebay.co.uk/The-Win-A-Respray-Auction-THE-ORIGINAL-AND-BEST_W0QQitemZ320157158358QQcmdZViewItem?hash=item320157158358

Hi Im new to the Z and a really daft question?? Is there a light for low petrol. If so where abouts as i havent seen it come on yet. I know you should never run on empty but just in case Also i have forund out i have a dogey oil pressure guage. Any one knoe were i can get a sender from online?? Thanks in advance Dave :)

men and motors at 8 today called great cars its a special on nissan z cars

About 6 weeks ago i did a search on ebay.com for "300zx 99 spec lights" and a set of two led clusters and a centre panel came up for $400 deliverd to the UK, the lights were all clear and had led stop and tail lights and led indicators, it said that they hadnt long been out and advertised them as being one of the first sets availible to the UK... Unfortunatly i cannot find them anywhere now, and would really like a set, has anybody come accross these before and know where i can get some from??? cheers guys Dan

^^AS ABOVE^^ Have I just not noticed it before?? :wack: The box at the top of threads with all relevant posts listed :confused: It looks good anyway.. LOL :)

Does anyone know of any places that repair dents in alloy wheels, based in the South West/ Somerset area? Cheers :)

:) LOL.. Check these beauties out.. . http://www.europerformance.co.uk/pages/products/product_info.mhtml?id=444121 .