General Discussions - 300ZX Related

I can't be the only owner of a Z in these parts; which is good to know. Spotted an awesome looking 300zx (silver), was parked up at St Margrets bay which is between Dover and Deal. Anyone? It even had a 300zx.co.uk logo on the window. 4.30pm 16th..

Left my car parked upwards last night and car ran beautifully from cold without any hesitation at all, could this be just coincedence?

was a good meet and was nice to meet everyone. weather was lovely and we all had the targas off on the way home.

hi all, another prob iv been having recently is my battery is going flat daily!! i have jump started her twice, then as that failed i gave the battery a full charge for 20hrs, still it went flat within a day. the car has a clifford alarm and im guessing this is draining it, but even saying that, the last four days i have left the car unlocked and with the alarm off to see if the battery will still hold charge, yet again, come the morning its flat again :( how can i check my alternator is working, or how can i check the battery is still good or not???? thanks, dan

hi all, iv had a nightmare weekend with the car and need some help as im a complete newb with 300's! basically took the car for an mot, as the car got to the mot station the temperature was right up and i had no heating, then steam started pouring out from the engine bay, and what a surprise, the readiator was completely empty :( i waited for engine to cool down for an hr or so then filled radiator up with 2ltrs of water, the water came straight back out within seconds :( it seems the water is coming out really quickly from the front of the engine towards the top, where there is 2 metal pipes around 2" coming out and bending to the left towards drivers side…

hi all, ive read quite a few posts on this but im still unsure, first of all ive got the jap clocks at 180kmph but i'd like it to display mph? do i need a conversion box or can i just buy a sticker to go over the top reading in mph? surely theres a easy way apart from wires and soldering kits lol... thanks

I'm trying to sort out the c/l on the passenger side, which hasn't worked since I've owned the car. The obvious to start with was whether the solenoid is getting a pulse/voltage supply - it isn't. I've got as far as eliminating the wiring between the car and the door as there's no pulse on the inside connectors either! Am I right in thinking the only fuses are under the bonnet? I'm struggling where to look next and am tempted to run a wire across from the drivers door!

Hi all, First post! I'm looking at buying a zed, I've found one that looks mint with one exception, as described below in the ad: Turbo's are smoking The smoke is blue and after removing the intercoolers and finding oil within them we concluded that the turbo seals have gone. The car still drives fine and boosts / holds boost although it gives off a lot of smoke and I would not suggest travelling a long distance in it as it will probably attract the wrong sort of attention. How much cash am I looking at to have it fully checked out and rectified? Is this a cheap fix if the seals are indeed busted, or is it gonig to break the bank? Car looks a s…

last night about 9pm on A2 racing another car? was a daRK coloured zed and was doing at least a ton!!(good show)

Good Afternoon Folks, I havent long had my car back from being repaired where I had a water bypass done. Now that is all nice and water tight at the back it appears (from what I can see) that one of the seals on the front water pipes has sprung a leak. Is this an easy fix / common problem? there appears to be a fair bit of coolant over the top of the engine etc. I have had the car for three years now and it has always seemed to leak something from somewhere! Cheers as always, Dave.

:confused: on ebay: is this a 300zx gasket kit - what would the OEM rrp be? http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190327713701&ssPageName=STRK:MESELX:IT See pic - not sure - anyone geeky enough to know if this is the real deal ta Blur

Well i had my air filter and t pipe off yesterday as i was clenaing out the intakes, i turned on the car so i could suck up some of the intake cleaner and noticed that the nearside bank sucks in more air on idle? would it have something to do with the idle valve being on the nearside drawing in air if so then that should be normal right? surely once the filter is back on it should help balance it out a bit more? Anyway i adjusted the throttle bodies and balanced them as best i could but it does still suck more on that side, I dont have any air leaks which im like 99% sure off. any input on this?

My circumstances seem to change as often as my pants (at least twice a year) and I now find myself ready to buy another 300zx :hyper::hyper: Ideally I would be looking at S2 or later manual TT with minor tastefull upgrades only for around £4kish depending on how much I get for my current car. My only problem is I was picked up by a mate recently in his '99 XK8 shaped convertable which had the XKR supercharger package on it. It was a mind numbingly beautiful car with 300zx matching pace and handled well considering it was an auto. My mate is convinced for a little more (around £4750) I could get one. I love the 300zx dearly and have had 5 now (although …

Finally got round to dragging the engine out of the red zed today to get the drivers side turbo replaced. Came out easy enough but don't see how you lot can do it in an hour or two :confused: Turbo was well and truly seized, wasn't oil starvation and certainly wasnt bearing collapse. What usually causes them to fail? Check out the Technicolour Dream Rope © :rofl: Its back in and mounts are in place, gonna spend the evenings over the next week plugging it all in and getting it ready for action next weekend. Then the real fun begins, I'll have a Z1 lightweight flywheel, exedy paddle clutch, uprated intercoolers and new exhaust system to fit :hyp…

Well after 7 months the engine is finally ready to go in! :nana2: So there it is ready for tomorrow, pumps and belts on, everything sealed and torqued up, the gearbox is on and everything is hooked up ready for the lift into the car. Night night engine, see you in the morning! :D

Apologies if this has been threaded before, but I thought it would be an interesting discussion. Below are my Top 10 most beautiful cars: Jaguar XJ220 Ferrari F40 Nissan 300ZX (Z32) Mercedes SLR McLaren Ferrari 348 Ferrari Testarossa Mercedes SL (2003-2008. Sadly the latest design is ugly at the front.) Aston Martin DB9 Mercedes CLS Mercedes S Class (1999-2006)

Not as in Picasso lol... but Advanced Race Technology? They are an american company who seem to specialise in the Z32 amongst other cars. If so do you know what the quality of their products is like? Reason being is I have some ART uprated side mount intercoolers on the way :nana2: With them being specialists you would expect them to be a reasonable quality and perform well... we shall soon see ;)

ive been clearing out my office and found this in a drawer....the 1st member to say ime the best thing since sliced bread and pm me his address will recieve this item for sweet f$ck all....happy ass licking guys:D

Been pondering over the thought of selling my zed!! I like it but trying to keep 2 cars on the go is stretching the funds. I came from owning audi's and im getting the itch to go back. Also the fact that my zed is a bloody auto!!!! Cant enjoy it as much as driving a manual! any thoughts guys?

....In the hope that it may help someone else - here are a couple of pics of how I managed to extract the injectors from the rail. I tried pulling and levering and was basically going to mangle the connector. This is obviously dead easy with the rail out so.... ... I simply used a couple of 30mm M6 bolts, a 10mm socket and a big vice as below. I am not an engineer or a mechanic, so correct me if you are - but it worked great and I had all 6 out completely undamaged in about 10 mins. :dance:

Hi all, I was a little busy with my new Z again today...... .......I replaced the (slightly knackered) aerial with a fully operational one (thanks to AndyZ; only £20 on Fleabay). Plus the best modification yet - I fitted my new 99-spec rear lights. Again apologies for the low quality pics from my phone. But you get the idea........;) Oh, and I gave it a wash:p Richard:hyper:

brought some new wheels for my z. just wondering how much a set of refurbished standard uk tt alloys with as new tyres,only covered about 2k are worth ?:rolleyes:

here is a few pics

got some good pics for COTM and for my insurance :D.

My OEM rod bearings just broke down. Engine out,- once again. I guess there is a lot of knowledge on the forum what type of bearings that are the best. Someone out there with names on the best bearing experts ?