Tudor...

aaah, if it's a series 2, forget that then! :)

just a shot it in the dark, but could it the PTU? it's very common if it is a bit dicky, to start to play up as it gets hot, exspansion and all that... just a thought pal...

just curious, is there anyone here who likes their HICAS?

Let us know how ya get on matey...

power steering fluid level?

I agree..... Check for dry solder joints on the back of the cluster.....

It only cost me about £1.60, so don't worry about it mate, not worth messing about for really!....

i think we're talking milli volts tho, 50mv rings a bell, but i could be completely wrong.... :)

I haven't got the info to hand, but if you put a multimeter across both connections, set to very low volts, ideally an analog multimeter, and spin the cog on the speed sensor, you will get a reading when you spin it (i think in the correct direction), i can't remember the official figures tho, i did look in the manual, but couldn't find it matey.... HTH...

I sent it first class yesterday matey....

65,000 RPM, that's impressive.....!

Yeah I got it mate, will be in the post for ya tomorrow for sure, it's already packed, just need to post it, tackled my new wiring loom all day today and finally managed to get it through the b*stard hole! I did email you back matey?.....

how easy is this with the engine in? I have my plenum off at the moment, thinking about doing it...

Well it's secure, but certainly not something i would do, or even think to do actually!

I stand corrected a bit then, although i do like the feel of mine, but nothing to compare it to.....

a scrap yard is your best bet, but if you don't know what you looking for, then i would imagine any half decent car shop should sell one, just take the pipe that comes off your clutch booster with you so ya get the right size... I would put a pic up for you mate but my phone is knackered! You'll want to fit the one way valve so that the arrow on it (they usually have one) if facing away from the clutch booster, i think! sorry my brains not working today :duffer: If i can get you a picture i will do, my setup works well and it's off the car at the mo as i'm fitting a new wiring loom..... Hope this helps matey, maybe someone will pop on with more info for ya...

Good news matey, yay! ;)

I got a vacuum tank from a Primera from a scrap yard, its about a 4 inch cylinder, came with a bit of hose and a one way valve to, for a fiver! I mounted it next to battery, and ran the hose from the clutch booster, to the tank, then to the balance bar... I have also heard tho, that you can just use a couple of feet of piping for the clutch, that can cure it too, although you still should have a one way valve in there somewhere too... HTH,

No worries pal... Email us mate with your details and i'll get it off to ya monday or tuesday, no idea how much it'll cost, so i'll send it then let ya know what it cost matey... dirtytudor@hotmail.co.uk

As long as your nicer to us in the future :)

It's at the back end of the gear box, if your underneath it with you feet facing the engine, it's on the left hand side (I think) about 2 thirds the way up the gearbox, you'll see about a 2 inche ish black/silver cylinder with a cable coming from it, unplug the lead, and there is just one 10mm bolt holding it, i have one since my manual conversion which i'm pretty sure is a good'n, ya can have it for nowt if ya pay the postage pal.....

Good stuff matey! I like to feel the connectors on mine, all lovely, shiny and new, yay! Not got it fitted yet tho, been busy, plus having a 'major trauma' doing it to! :) So will removing those pipes release the aircon gas?

Will removing those pipes release the aircon gas?......

My harness was knackered, so i made one, using the old cabling (as it is screened) and a couple of connectors from a scrappers, all good :)

Here ya go mate, it's the rectangular chip, bottom left, i would have circled it for ya, but got no paint type drawing effort programs on this lappy...... HTH... P.S. your's could look slightly different, (stickers on it, etc.) although it will be the same size and dimensions, and in the same place, if it has been changed, re-mapped etc.......