General Discussions - 300ZX Related

today heading south from j23 a14 looked like nice motor..

Saw you today at approx 3.30pm... Al

:smash: Pain in the arse to do, but i put my favorite bumper on today, with twin LED`S and side light led`s, just need skirts next!! :smash:

I have got 2 faulty driveshafts from Concept Z. Basically they are both 2" too short. I paid for them to be posted here and i will be sending them back for a refund and will get the postage for the second ones delivery to the UK refunded. However, it looks like i will have to pay the reurn postage. Do you think this is correct for being sent items that are incorrect? Should i pay the return postage or should Coz? It will be about £75 to ship them back. What do you guys think?

does anyone know of an aggresive chip for a 1989 Z32 NA with a manual conversion? need to increase torque

My Z has just been delivered to Thor to have the AEM bits and bobs fitted and mapped. It has spent last week in Manchester at Phils getting the OS Giken gearbox and propshaft fitted (Top job again by the big man!) and Securicar Paul worked late last night to fit the new alarm system. :bow: Asked Thor to keep me informed next week as to how it is all going and if any other parts will be required during the mapping.

Hi I've installed a glow dial kit in the dash from performance dials, you can just see them below, however the instructions tell me to wire up the live wire from the switch unit to the supply to the dash lights, can anyone who has done this tell me exactly where i splice the live wire into? Man thanks Ric

Hi In my previous car, an MR2 n/a, i installed a car pc, however that car is no more and i am now driving a TT zed, i'm slowly warming to it after 3 years in the 2, and have decided to install a car pc in it as well, now the carpc in the MR2 is up for sale as a complete ready made install, so i cant use any of the components. That means it a build from scratch project and the first thing is to buy some gear. Here are some Pics of the PC and the Screen. As the project develops i'll keep this thread udated Regards nutter PC 8" touch Screen

A complete 1995/6 spec harness and all the ECU's??? Is that right - or is there a shortcut that I am not aware of? Any help appreciated. :shock: Andy

http://www.driftworks.com/catalog/products/fender-braces.html could only find these in the US until now......

Has anyone had any experiences in these god speed kits, they seem to look very similar to the crappy ones that snap. http://cgi.ebay.com/90-97-NISSAN-300ZX-Z32-SUSPENSION-SET-CAMBER-TENSION_W0QQitemZ300343019772QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item45edd6c8fc&_trksid=p3286.c0.m14

anyone know what spoiler this is?? anyone have any pics of it fitted to a car http://cgi.ebay.co.uk/Nissan-300zx-Rear-Spoiler_W0QQitemZ190335671086QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item2c50e3db2e&_trksid=p3286.c0.m14

Sorry bout the crap filming! And you-tube have nicked the sound :-( [YOUTUBE]u0nBXJ6D5vI[/YOUTUBE]

I have a 91 300zxTT and would like to tune it. It has a decat blue flame exhaust already and a different induction system/air filter. I only want a basic ecu upgrade or simmilar. ZIND

Did door mirrors with led indicators blended into them come standard on any series of zx?.. As I have seen some before I am sure..?:confused: The reason I ask is I am thinking of getting rid of the indicator on the wing, and finding some led mirrors.. to give the car a smoother look on the side... Anyone got any info on this ? CheerZ!

Hi Whats the difference between a cz 32 and a gz32 swb? Thanks Mike

Refurbing the brake callipers with the oem seal kit? I've had a search but can't find much. cheers dave

Totally new to this can anyone get me in contact with baz? thanks

hi ive been looking into sorting my speedo face in my 1995 n/a as the speedo face has been switched to a mph one but looks like its folding away from the speedo surround due to the mounting pionts on it not fitting my cluster propely, i think the kph face was a series 4 and the mph face from a series 1/2 the only clock faces i can find that will mount up properly are from the us which go up too 160 mph i also understand that the resistor mod wont work in my 1995 clocks so cant adjust them the make it read right so what are my options ? anyone have some ideas dont care if they are black or indiglo or read to 120 mph or 180 just want it to look neat

Just seen this on the Z1 site. http://www.z1motorsports.com/product_info.php?products_id=3945 I had a clutch that had the hissing noise etc. So i removed a pipe and now have the stiff pedel with no noise. Would fitting this get rid of the stiff pedal or hissing sound that you get that is common with a clutch booster fault? Cheers, Ant

started my car up and took it steady until she was nice and warm... Got her up to 70 MPH and i noticed smoke out the rear of the car. It wasn't thick and could see right through it. took it home gently and the smoke wasn't visible unless i put the foot down a smudge. When i was at home the oil reading seemed fine and no smoke on idle.. I did overfill the Autobox and was told it might smoke a bit when the excess shoots out the box dip stick and onto the exhaust however there was no traces of it escaping. The car has sat for 3 months so does this play a part in it? How do i get rid of it? :(

Hi guys, Located a whole load of boost leaks including one at each end of the balance bar. I've put new seals on it but it's still blowing, can't understand it. How does everyone else seal it up completely? Also, I can't understand why it should be blowing past the nuts (lost one of the dome nuts), assuming the seals are sealing there should be no leakage here. Assuming they're not sealing I'd expect it to leak out of the sides rather than the more difficult route past the stud and nut (!?) Perhaps the balance bar flanges are warped through previous overtightening?? I'm going to resort to some flange sealant for the time being I think. Any reason why I…

Went out for a drive in her last night, to start clearing the smoke, and failed miserably :( I knew that buying a car that's been sat as long as this was was asking for trouble. I knew it'd be one thing breaking after another, and alot of teething problems.... Tonight, I was nippin about with my nephew, and she was running good, pulling nice, still smoking from the pcv's being done, but that's fine, I know why, and I know it's fixing itself the more I drive, so every now and then, I was giving it the beans for a few seconds, and I was being dead impressed by the way she just zips off up the road when you floor the go button. Then some chav in a vxr decided he'd …

See below. Just wanting to confirm that the key on the chip faces to the red dot on this socket.

Well, as days go by, I am seriously thinking about putting some money aside for an eventual colour change. Most likely a Nissan colour. I like the KH6 pearl white a lot. Glows nicely in the sun. BUT, the longer I keep it, the more I fancy a change. I want something a little more crisp and/or vivid. Body will have some very minor changes. 99-spec front bumper being the main one. The rest will be as-was except with the addition of UK spec glass. ....and, shock horror, maybe some side skirts. I only really like a few. Kaminari and Stillen being the main two. Now.....this might sound odd as I can't stand the wings west kit for the Z. It's nearly as ugly as the …