General Discussions - 300ZX Related

Going round in circles here!! i have been told by 2 x companies that the power the car is producing requires a twin plate clutch poss exeddy type! My other parts are being held up because of that volcano and now this not sure i am going to make Japfest this year:taz: What do you guys reckon, going to cost me 1500+ for the clutch:censored::censored: Dave

ok i know im repeating but im making one last double check. i know where the jacking points are to raise the car and where the saftey stands are for the 4 axle stands. aswell as jacking the car from the front crossmember i can ALSO bring axle stands forward from the guides "safety stands points" and place under front cross member? this will in effect help me by not having to raise the front as high to get the clearance needed for the intended safety stand points as i can have them more towards the front of the car under the crossmember?

Hello all, Long time no speak, The Z has failed its MOT and I do not have the time or money to fix it. I would like advice on whether to break it or to try and sell for spares / repair. In summary the Mot failed it on crossmember and break lines. I have set up website if people would like to have a look and request stuff here I am also willing to sell the car if someone would like the project, nothing wrong with the engine, body, gearbox etc just those two points!! Will put the Mot certificate up soon. PS the car has a cherished plate which will stay with the car if you buy it. Worth about £500 (J5 GDL) Cheers zx_steve http://zx-steve…

I'll soon be refurbing my spare TT engine ready to go in my zed. The engine was out of my breaker and was in very good conidtion, with a recent water pump, New big end bearings, thermostat, plugs oil filter. The compression is also very good. Engine has done less than 60k and ran very well in my jdm. As it's sitting on a stand i thought I would do the following on it;(not in any real order) Remove tubs Refurb Tubs, was thinking of asking Jimmer to balance them for me. Refit Turbos new cambelt New drive belts New tub seals Check manifolds for cracks clean plenum Clean hard water pipes clean throttle bodies delete EGR Delete Plenum water pi…

blue ZED turning around opposite the Welsh zed centre nr wrexam

Hey folks i was after getting peoples views on AMS performance products for the zed. Has anyone used any of these parts for a long time and had any problems? Thanks Marty

hi . im looking to add some extra horses to liven things up a bit . as far as i know my zed is standard . cat exhaust , stock air filter , dont think shes been chipped . not looking to build a monster but would like to get her up in the big 360-370 bhp range . any suggestions as to an order to change things to get best results . also maybe a guide to rough cost of mod parts and ease or difficulty of doing them . one final ask is by adding an extra 60 or 70 horses how will it affect things like reliability , drivability and economy of the car . cheers in advance for your suggestions andy ps . should finally have some pics on over the weekend . had the respray do…

Weather is going to be great on Sunday and we're having a gathering at a pub near Swindon. http://www.300zx.co.uk/forums/showthread.php?goto=newpost&t=137217 So if you lot are at a loose end, would be cool to have some more people. Have about 10 so far which is quite a nice amount....but would be nice to make it a 'bigun', like the infamous Ross-on-Wye meet of 2005. :)

would a seized turbo cause the z to smoke?

i know that these say 300zx turbo but i always get suspicious. http://cgi.ebay.com/ebaymotors/6-Nissan-300ZX-550cc-1990-96-Fuel-Injectors_W0QQcmdZViewItemQQhashZitem563b6a50d2QQitemZ370364010706QQptZRaceQ5fCarQ5fParts will theses work well in the zed? Trying to find some injectors to support 550 flywheel BHP :( if not does anyone know what brands will fit? not looking forward to the £600 price tags ive seen on some cheers

Hello guys, I am looking for a very good tailor in the london area to retrim my front two recaro seats in leather, and the door panels etc in leather. I have all the leather already, just need a recommended tailor. I would love any suggestions from zed owners who have had their seats retrimmed. Thanks a billion :helpsmilie:

Hi Z nuts, I have a pear white TT, it looks good. However I am putting some fine touches to it. Anyone have any ideas of what colour I could spray the calipers and the wheels in order to compliment the rest of the car??? Thanks for advices :thumbup: Vic

Has anyone put mesh on the holes on an original bumper? Got any pics? Would it look pants or decent? Mine is off at the mo so can't picture it, just a thought of something to do....

http://www.pistonheads.co.uk/sales/1491074.htm As the title really, or is it worth offering £10k to see what they say? Looks very tidy indeed but not sure if it's worth £12k, help/thoughts appreciated. Thanks, Mat

I betrayed you all for a minute :blushing: I went to view a GTO with the bottom end knocking. The car was dirt cheap, had a chat with the lads on the forum, they laughed at me, saying its worth £250 tops, and id spend about £2k fixing it. So im back on solid ground and back on Zeds. These arent as expensive as GTO's surely?

Well a couple of months have gone by now and still no news of my engine or wheels. However it seems the garage involved IS insured and i have a solicitor on the case now. A guy has been arrested although what he is being charged with is still unclear as the police are still investigating. I now have the problem of trying to find all my receipts and im missing a few (wiseco pistons,eagle rods,cometic head gaskets,full gasket set etc) Depending on the outcome of the insurers is the deciding factor as to what i do with the car.Wether to break the car or just to put a standard engine in and run it as that.Either way i can see me selling my AEM ECU and a few other par…

This gearbox sold today for £87.50!! why so cheap? :blink: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=160422498625&ssPageName=STRK:MEWAX:IT

Front member corrosion Found during a new owners assessment, bizzare the rest of the zed is tops, done a fair few of these but this is bad, when we get to fix it will do a write up on it with pics. Was a disapointing discovery for the new owner, to be fair unless jacked up you would not see it, rest of the zed is fine so well worth repairing and not to let it spoil the purchase for him. Jeff

I'm thinking about replacing my tailgate with one that has had the wiper removed. I was wondering what people thought about the rear wiper. Do you really need it? etc... What do you think?

Sorry just before I grab an FMIC I was wondering what customising was needed on the Z, front bumper grill need shaved down a tad from behind?

Got the tension rods of my old jdm out today as I was going to replace the oem bushes with whiteline ones. Had a quick look at the rods and it appears that they've already be done :clap: They look like E.S ones to me, can someone confirm this? Cheers Dave

Hi everyone, As well as my Z32 I have an old:wheelchair:, well actually its the same age as the Z32, Z31:wheelchair:. I've never seen any on here as we seem to all have the 32 but I want a few bits and pieces for my 31. Firstly, anyone got any bits and secondly where can a look?:confused1: and don't say Ebay cause there was two on there breaking, one was the earlier shape and the other the bloke ripped me off by taking my money and not sending me the parts:hang: jase

Hi couple of wheel questions, whats the most common wheel sizes and offsets for an aggresive setup. I have a set of 20" kicking about, think thats maybe a bit big. Also whats the standard offsets?

May need a top up on my '97 NA Any suggestions on best oil to use :scared:

as i'm still wet around there ears on here still need a little advice... In the process of changing all the rear brake lines i've managed to break (what looks to have already been week) one of the feeds on the diff oil cooler, a friend who has 2 x 200sx's (so i dont believe the little swine) says they never work an to remove it is he just saying that as hes jealous he doesent have one... so 2 questions 1 does anyone on here have an oil cooler for sale?? 2 can the oil cooler be removed without harming the diff?? As i'm a firm believer in things were fitted fo a reason.. or are my worries confounded an it'll be fine??? any help appreciated..