General Discussions - 300ZX Related

Saw you Tuesday 27/4/10 8.40PM A37 just leaving Shepton area?? :cool3:

Completely stock. Travelling out of Wilton on the A36.

bought a waterpump off a fellow zedder and got it in post lovely jubbly and bloody fast. only problem is when looking at fitting guides on this forum i can see a big difference in the size of the belt drive on the water pump. mine looks quite a bit smaller :( would this mean my pump wont fit at all or would it fit but turn at a rate too fast? i will get pictures after work. hoping i can use it :(

as TT ones???

whats a good resonable drop in ride hight and what brand to go for. also whats the biggest alloys the fit with no modifications. thanking you

H Guys Got one of these, and just wondering if anyone has actually fitted one themselves rather than send it off to the body shop.... if so, im after ways of securing it to the tailgate. The one i've got does not just 'sit' in the right place but can be persuaded with some clamps, is this usual?. From what i can see there are only 2 flat areas that come into face to face contact, which i hardly think would be enough to hold it in place with all the torsion going on. ***Sorry, Double posting - please feel free to delete***

Hi all, Looking to get some figures and advice together on a respray for the Zed as the 20 year old paint is starting to suffer a bit and there's dents and stone chips all over the place, the front passenger side arch has some rust in it and the rear drivers side is starting to bubble :censored:. So questions are: Passenger side front, am I better off replacing the whole wing or cutting out and re-welding? Rear Drivers side I guess we'll have to cut out and re-weld? (When I say I what I mean is body shop) How much should I be looking at for a same colour respray in Arctic white? And lastly can you guys recommend a good body shop to take this wor…

H Guys Got one of these, and just wondering if anyone has actually fitted one themselves rather than send it off to the body shop.... if so, im after ways of securing it to the tailgate. The one i've got does not just 'sit' in the right place but can be persuaded with some clamps, is this usual?. From what i can see there are only 2 flat areas that come into face to face contact, which i hardly think would be enough to hold it in place with all the torsion going on.

er...one on the left...

Hi, my 1989 TT seems to be running rich. The fuel economy even for this car is terrible. 10 mpg around town taking it very easy, 15-20 on a run. The car is standard as far as I know apart from Cat-Back stainless steel exhaust system( standra manifold I believe). The 5 inch tailpipe inners are coated with soot. My father pointed this out. Just wondered whether it was an easy jot to tune the car or is an ECU issue??? zind

I called Darren ( Dazkent ) this afternoon to ask if it was ok to take my car to get the central locking looked at . They were busy but he said " Bring it down " . The lads soon had the door card off and sorted the problem out . They also fixed my loose window while they were in there . Great work , quickly done . Again , many thanks to the D2 crew . Highly recommended ! Brian

Is there such a thing as this type of guide for the wheels and fitament of wheels on a zed? (I spent a while searching before this post but didn't come up with anything.) I'm on the lookout for wheels and I saw a set with the following dimensions: 19x9.0 +42 PCD: 5/114.3 for the front 19x10.0 +37 PCD: 5/114.3 for the rear I see from searches I have done that a 9.5" rear with a 35" offset has a nice aggressive stance (Funkysi's being an excellent example). However would the same offset be ok with a 10" rear wheel or does the width of the wheel have a significant bearing? Does the offset on the front make sense with a 19"rim? I know that the size of …

The Zed had its first decent run this weekend at Wiscombe park, nr Honiton and did a 47.1 sec run thats a 3.3 second improvement on the last visit, still getting used to the car ... has a bit more power now producing 261bhp at the wheels not bad for a 1990 NA ...still on standard rear suspension, so handling needs looking at ... looks like she has great potential though..post pics later this week

Finding engine coolant leaks that leave no trace can often be difficult to locate without the correct equipment or a bit of luck. Here a case in question, water loss was very, very slow, infact sometimes it would loose no water at all for a while and then again later the leak would flair up again. The system held good pressure when tested several times and with no evidence to speak of it and it was a real puzzle. But a chance spot lead to the problem, a previous cambelt job had required the removal of the water pipes at the front of the engine, the two rubber pipes are held by 4 spring clips, one of the clips was not sitting correctly. A quick dimant…

what colour should the b post\ window frame be on a metallic black zed. im repainting and they were / are the same as body colour but the car has been resprayed before. most zeds are pure black here anyone help?

Is Castrol Moly grease OK to use on poly bushes for the control arms etc.. I've run out of the stuff you get with the bushes as I keep dropping the buggers and having to clean them :helpsmilie:

Unmolested made me laugh, :whistling: http://cgi.ebay.co.uk/1992-NISSAN-300-ZX-TURBO-BLACK_W0QQitemZ320522998097QQcmdZViewItemQQptZAutomobiles_UK?hash=item4aa0a8d151

As above guys, Groover has kindly done some more LED conversion work for me this time on the window switches & Mirror switch :clap: Got them back with wires ready to plug in just wondering which is the best way & how to do it? Any ideas?

Bright yellow sorted zed, Parked in redcliffe near temple meads station.Nice

Dark blue z, Driving along the portway under suspension bridge,Lunchtime.

Just noticed a whistleing noise when i start is the starter on it way out .can i get any spray in there without takeing it out thanks taff.:thumbup:

Can anybody tell which alloys these are in photo ,think they would suit my car.

hi can any one send me a wiring diagram to convert the auto alternator loom i have connected the starter and one plug on the box that plugged straight in i still have 3 plugs hanging from the box ?

a friend has asked me to find out what the ideal shift changes are on the 300zx as he has a manual ive tried searching but couldnt find anything Many Thanks Virus

Anyone here watch to buy or not to buy on bbc1 on friday? My dad did and said there was a guy that was on the show wanting to buy a house and showed him arriving in his Zed....anyone on here? I found the episode on BBC iplayer......skip to 25minutes and you can see him arriving. :thumbup1: http://www.bbc.co.uk/iplayer/episode/b00s5x96/To_Buy_or_Not_to_Buy_Series_10_South_Birmingham/