General Discussions - 300ZX Related

As title suggests, stearing wheel wobbles sevearly when braking from speed. and the car seems to weave all over the road when accelerating fast. i thought it was just strong wind, but it seems way to common now. Can anybody help with these issues?

Hi all, New on here, just bought myself a nice 1989 Nissan 300ZX non-turbo. It was imported from Japan 2004. Where can I obtain parts for it,I want to do a cam belt change and service, also I have noticed that the hazard warning light switch works when pushed, but will not stay once let go,does anyone have a fix for this, or is it a replacement. Cheers Ian (vectra_666):wink:

Can anyone recommend a good flywheel for a moderate/high powered Zed (>400hp on stock boost)? Was going to fit a segmented RPS billet flywheel but after ordering 2weeks ago have just received news that the supplier thinks they may be discontinued. Car was due to go to Jimmer on sat for fitting (along with other work). Really want something of equivalent quality and cost really that I could potentially source by the weekend? Really hoping for quick recommendations (with links if possible??). Thanks guys and girls! :surrender:

Just at the top of Pantmawr road heading in to Rhiwbina. 99 Spec spoiler, I think! Looked very nice. I was heading in the opposite direction in a Red/Pink VW Polo!

Hi there, i am new to this forum , i have a 93 300 ZX TT the Cruise Control does not engage, i press the button on the console to activate and a light appears on the dash, all good so far, then i use the Stalk to set the speed, nothing happens, the second light does not appear or even flash, i have run the Nissan in bulit diagnostics as in hold the stalk down and turn the ignition on, then operate the stalk, press the brake pedal and shift into Drive etc, when i do this the light comes on and flashes quickly, i understand this shows there is no fault with the stalk , brak or gearbox, on this basis im lost and need guidance on how to trace the underlying problem, any …

Ok here we have it an invitation to all of the members here to the ZEDWORLD XMAS BASH Sunday December 19th 2010 Start time 10.30 am until ....well last year 5:00pm (ish) this bit is up to you guys and your enthusiasm and of course the attendance numbers. Same as last year this is to be a festive party meet for the membership that we are very happy to facilitate the event and can promise a good time, music food and drinks ( non alcohol for the drivers ) Comfortable sitting area with full facilities, heating, toilets etc. the inner area will be cleared of zeds so a larger area still inside ( heated ) for chatting and putting names to faces etc. the refresh…

Just a thought, whats the easiest way of storing an old thread, ie at the moment i need lots of past info like cambelt change ect, but I have to keep searching for the right one, so... once ive found it how do i save it for easier access? CheerZ

Hey matey, Tried to PM you this link with the advice on setting ur EBC, but u r now a reg user, so here is the link with my settings and advice on how to set boost from start. Will def come over and give u a hand to set u up soon. Hope this helps for a bit. Al. http://www.300zx.co.uk/forums/showthread.php?t=138693&highlight=profec

was just wondering if this is possible and if it is fairly easy to do was just wondering if anyone had made any instructions for this

get a sort of knock / clunk noise when slowing and coming to a halt and when i go up slight kerb on to the drive. someone I had in the car said they felt a knock/vibration in the footwell ? Had front tension rod bushes done a few years back and had poly ones put in. Also running Tein suspension which is pretty firm. Could this be the Tensions rods ? or something else ?

Would anyone know the flow rate of the stock one?:biggrin:

I saw a black LWB zed today on a J plate. Had 6 pot "lambo" style rear lights a big wing. Was parked infront of a shop I think on the A610, fairly near the city centre.

Did we come to a final conclusion on this old thread ref BOV location (inner pipe/outer pipe or stock recirc location) or does anybody have any updated techical data/details to varify best BOV location for high power Z32 application? http://300zx.co.uk/forums/showthread.php?t=79955&highlight=bov+hard+pipes

I have a swb TT Auto, Im currently rebuilding a manual engine and when fitting will be installing a manual conversion aswell. Are there any major differences on the engine wiring loom or anything else I should be aware of that needs changing??? wasnt sure if I should be using the existing Auto Mines ECU or change to a proper Manual ECU? and again will i need to change the engine wiring loom etc? Thanks Craig

How far in advance would I need to book a Conzult and compression test in at Zedworld? Reason I'm asking is its 280 miles either way so need to sort out time off from work etc. Just gonna have to bite the bullet and go visit Jeff and see what's what with this engine so I know where to go from here :thumbup1:

anybody used any spray cans of this, and if so can anyone recommend me a decent brand? i want to go over my spoiler / front bumper and rear bumper. also going to need some for when i finish off repairing the rear quarter. I know the risks involved with using this stuff. mask / gloves and full body protection.

Right guys and gals, i need your help! As some of you may or may not know having recently tried to fix my Autobox, with little success, i have decided to take everyones advice and go manual, about which i am now very excited :hyper: I got my car towed to Andy Isherwoods in Ascot on the weekend, and we started to clear some space and get a few bits of one of his breakers that we will need, and then we got mine up on some stands. We will be working on the car this weekend (Sat 13th) and on the weekend of the 27th/28th (and then probebly every weekend that it is dry untill it's done!) Unfortunately for Andy i am a complete mechanical novice, so my reques…

hi sorry new to this site. im in desperate need of a second hand tank for my zed im in aberdeen scotland and dont know anyone who has a zx let-alone deals in parts for them. could anyone possibly point me in the right direction? much appreciated regards Matt.

Just fitted my japspeed rad, fitted fan surround but the bottom peice fouls on the air con compressor clutch wheel thing, so didnt fit that peice.Is this going to be a problem also had to cable tie top mounts as the brackets dont fit i know you can get a custom made panel for this but has any one made any top brackets thanks.

Been test fitting the polished plennum and I think I would Like to do a cable tidy while I'm at it ! what i would like to do is split the main harness into two branches that can go down each side of the fuel rails ! doing this would be neat and hide all the cables, is this safe to do ?

This is what this club's all about. I contacted Lee a few weeks ago about possibly sparing some time to come and help me detail the V8. 6.30am Friday morning i heard the rumble of a zed coming down the main road and he set to work (well after an hour of gabbing from both of us lol) :rofl: The results speak for themselves. Mate you're a star and i'll definately get you a pint in when i see you next and let you take him for a spin :D Cheers again for all the hard work, Nick

I must be mad getting another one but popped down to see scatrat on Saturday to have a look at the TT he has for sale and i'll be popping down to pay the last bit and bring it back in a couple of weeks time. JJ is a top guy and it was a pleasure to meet him - hardest working guy ever it has to be said! :) Cheers for the tea buddy and look forward to seeing you again when i come down to pick up the old girl in a couple of weeks. Right back to the V8 again tonight and tomorrow and get it out the garage to get the rover in and give that a tidy up to move it on.....

Hi guys. Was at the dyno place yesterday finally getting the car tuned but got a problem. In short the car runs spot on until I go on boost at which time it misfires. I went through pulling off the coil pack connectors to see if any of these were down and it appears number 4 wasn't making any difference. I've tried another coil pack and also tried changing a couple round, the plugs were brand new but still no change when I pull the plug off. Any ideas what this could be or how I can check??? I have datascan if that helps. Maybe PTU perhaps? This is. Series 1 ptu.

Only thing is the text came from a non uk number and the chap is called Salman Tareq and he wants me to add him as a contact on MSN so we can chat more about the zed there. He hasn't said where about in the world he is but I'm damn sure I'm not adding anyone on MSN after a previous scary experience lol!! Will see if this leads anywhere, am not holding my breath tho...

Right i have my thermostat from my car in front of me, now i know it should be fully closed when cold, but its not, but i have a niggly feeling about it so just would like someone to confirm it lol Fully closed = good Almost closed but not quite = bad