General Discussions - 300ZX Related

just done my quotes and cheapest so far is adrian flux at £545 any 1 recommened any others to try

after taking the car off the road for the winter..the last couple of days of proper driving iv got a sever problem with my brakes...i thought at first it could be the calipers..but could it be the master cylinder causing the pistons failing to retract?..or is it maybe as simple as a siezed caliper.. symptoms are braking from 60+ causing severe judder(i know its not warped discs because on a hill the car doesnt roll back or forward when the brake is released+ theyr only 5k yo) also if i use engine braking rather than braking i dont get the judder when i do use the brake..if that makes scence.. thanks

Hi guys my brother in law bought a z just over a year a go and today the head gasket went ,i took the spark plug out on number 5 piston and start the car ,water is coming out through the hole and also white smoke at the back of the exhaust. Looking on the net i come across these head gasket repair kit ...K-SEAL or there is few more makes out there...just want to know if any of you used these products and if there any good or he really needs to do the head gasket

As above... I can't send you any more porn!!!

Yo I bought my car lowered, but don't know how much it is lowered by! Is there a way of measuring the car to find out how much it is lowered, maybe a diagram or sum-thing would be nice lol Thanks

hi all still got this electrical problem with the zed the left pod (wipers/heater) all just go dead randomly it was mentioned on here before it could be the start of the fusebox getting wet, well tonight i've had the kick panel out dumped a load of water down the targa drain and interior and carpets are all bone dry so i think my alarm could be going faulty i've got a toad ai606 fitted cat 1 now am i right in thinking cat one alarms imobilise starter and accessory circuits? it is doing starnge things like the led stays on constant with ignition off (it never used to) and i can hear the relays clicking out so before i go and rip it out/bypass it just looking for ideas on h…

I'm looking to buy new wheels for my '93 UK TT whilst re-using my current Goodyear F1 Eagles, 245/40ZR18 on the front and 275/35ZR18 on the rear. My current wheels are Devil 147's - 8" front and 9" rear, both ET35. Most of the deep dish wheels that I'm looking at are 8.5" and 9.5".....will my current Goodyear tyres fit these slightly wider wheels? :huh: Is there an online resource that gives you said information? Thanks - Andy

Im looking in to buying the rest of my exhaust system...Can any of you direct me in the right direction in the uk or cheaper sites in the states? Im after the mid section to back boxes. Not sure if to go for X pipe or just straight though with twin exits either side. Thanks Dan

Hi guys noob here Might sound a really stupid question but why is there a gap below the tail gate between the two rubbers that attach to the lip of the car. Also how do I subsribe? Thanks Paul

For everyone`s information his thread about a clutch unit sale gone wrong is not about ZEDWORLD as assumed by some but most likely about a company of similar name (?), we do not source our clutches from the US we do not charge import tax, we do not take 3 weeks to supply parts and we do not text customers with excuses! I did place some pictures of of clutch units in his previous thread and I think this is where the mistake has been made, we are not in any way part of this deal, if we had of been he would of had free delivery as he lives close to Jamie. Jeff TT SHERRGAR thread http://www.300zx.co.uk/forums/showthread.php?159983-am-I-being-rippped-off-yo…

does anybody have a set of Image wheels on their zed? I've been hunting high and low for some rims and i think Image have a style that will work well. Any pics, feedback etc? The UK seems to be crap for wheels. I quite fancy a set of Work VS XX or Advan Siena Gen IIs but they aint easy to find.

Thought u guys might be intersted in this ... This was my winter project 2011 :) my bro in law bought it as a donor car for his and i bought the remains of him .. I thought i would get away with it being a cheap build , un be known to me the cost of parts for these bloody things it ended up owing me a fortune so had to let it go 90% finished :( lovely car though :) hope you guys like it .. Got a feeling the guy who bought it will take it to the nxt level :)

To be honest I dont really think I am dealing with mega-cowboys but this is a tale of woe. It was Feb 13TH 2012 and I ring them up hoping to find the illusive part. They say they can help. It was explained it would take 3 weeks to be despatched cos it was being sourced from another country. I said OK ( I felt I was running out of options) They explained how they would take the card details to hold on to so the did not end up with this part if I were to backout. They explained a handling charge of about £10. it was really £17. I place the order to find I have too add on the tax, another £35. They took the money immediately. - That is not what they said the…

Right then, as I need to disconnect some air con pipes to remove the cooling unit under the dash I'm going to remove everything else hopefully including the compressor tomorrow. Is there anything I need to know before cracking on with it? Cheers

Hi guys, I'm replacing the engine loom so I've removed the glovebox and need to remove the above part to get easy access to the loom retaining bracket on the bulkhead. Looking at the service manual I need to undo 2 pipes that run into the back of the cooling unit, I'm assuming I will need to drain the system, where is the drain point on the car? I will be deleting the air con anyway so I'm assuming I won't have to put the pipes or the cooling unit back after the loom.

Heard the engine has a coolent drain plug somewhere I'm about to give my car a nice new fresh set of coolant and would like to empty the block so any help as soon as possible would be most appreciated

Hi all can someone measure the size of the Zed battery? Or battery tray. Needed as quick as possible? Thanks Dan

Pretty sure this is an open secret as a few members know by Facebook and PM. And it doesn't take a genius to work out why I have been selling all my parts off. It hurts typing this, which is silly as it's only a car but my Slicktop was written off a couple of months back. Buying the MR2 has eased the pain :mad2: but only a little. Didn't take loads of pics for obvious reasons, but here are a couple. Doesn't look too bad in the pics but you don't have to be too bright to work out the repair cost with new parts to know why it was declared a write off. This thread is not a discussion about me buying it back, doesn't look too bad, easy repair etc,…

I like the look of the hks back boxes but dont like the price over £600 i need a new system soon to repace my trust system which has been on for 7 years now .Have tried searching the web for a replica cheap copy but cant find anything anybody seen anything like this thanks taff.

Nissan dont sell touch up for eh7 pearl glow yellow pearl not in the uk anyway ,do you think my local paint shop can mix it from this code .Has anyone tried touching up this colour thanks taff.

what oil is recommended for my tt with 105 thou on the clock any help please

just saw this on facebook... someone might be interested... https://www.facebook.com/photo.php?fbid=10150611255802186&set=o.36631567687&type=1&theater

just wondered if you need a diff maf if you fit twin hks filters

was told about this on ebay yesterday and couldnt help myself..........:)

Thinking about what im going to do with my car. Its the best zed ive had so far, so it makes sense to keep it if i cant get what i want for it. Finding a TT in as good condition would be a tall order without it being ££££££. My thought has been, if i can sell the parts off the car i dont want, or need, the funds can go towards getting how i want. The wheels are for sale, the rear lights and im thinking to sell the engine, but dont know what its worth. Today i fitted the TT front bumper. Its the wrong colour, but already looks better!