General Discussions - 300ZX Related

We are going to be playing from about 9 pm will post closer to time

I've put a pic of my HKS Super AFR and Autometer Air/Fuel ratio gauge, which are mounted in my glovebox, in my rides section. If anyone is interested. Cheers. Rob.

OK, I'm going to get my MOT today and driving there in the heavy rain. Suddenly, the engine starts cutting in and out and I feel like I'm riding a kangaroo. One time, it cut out at low speed and the engine actually stalled completely. Any ideas what this could be? It seems to have vanished completely now! I've had it happen maybe once before and thats it but it got really bad today (I had to pull over at one point). On the way home, I was driving pretty slowly and the car was fine. But, I thought I'd try nailing it for a second and it triggered it off again. I think this could be coincidence though as I was going pretty slow on the way there because of the rain. …

my battery has not seemed to have enough power to turn the engine over. even after charging over night, it would not hold the charge and went down to 10v. I went and got a new battery today and since then my old battery has been turning over the engine first time without any strain. I just wanted to know if anyone has had this experience before and do you think my old battery is just gonna give up without notice. Cheers Vijay

I'll 'fess up right away, I'm on a quick infiltration mission from my normal home on the Supra forum. Just had to ask this, I keep seeing two Z's, one red, one yellow, near Aldershot or on the A331. I reckon the yellow 'un wanted to play but there was way too much traffic. Anyone here? Graham (Silver MkIV)

First rule in Building a skyline engine Turbo must be bigger than your head [This message has been edited by 300z (edited 30-11-2001).]

Hi guy's the main fan attached to the water pump, on starting the engine it spins very fast for the first minute or two then slows down never noticed it before, seems a bit stiff to rotate, just wondering if it's the norm? Been toying with the idea of fitting a big kenlowe fan anybody already gone down this route????? cheerZZZZZz

http://www.exvitermini.com/movies/vsrh9.mpg

Does anyone know where I can find a forum similar to this for the R3x Skylines?? Ta Glen

Hi I am after some panel pins for the footplate above the sill, I don't live near a Nissan dealer and wondered if anyone might know where I can get them. Cheers Mark Hanley

you must see this. rtsp://video.sat1.de/ondemand/blitz/kylieminoguevideo_gr2.rm Enjoy Martin

I have just spoken with Forge Motor Sports http://www.forgemotorsport.co.uk/motorsport/products/intercooler.html who make Intercoolers amongst other things. Look at the one for the Sunny FM INT -GT12, it's huge. The guy there reckons he could make a large intercooler for the 300zx for about £360 inc vat!! He would need a drawing or a car to copy one from. He can also make the pipes etc. Who is interested and who could help with the drawing or has an intercooler upgrade we could copy? If he has a car he can copy he can have it fully specified with all the right connectors etc, and for suitability on the 300, AND, if we get 5 people it will be ab…

Anyone know how much oil the diff takes and how easy is it to do?

i have to ask, because the magazine could not understand why the owner would not like to have been in it.? Just curious cause they had some choice words about him lol

I was in a car yesterday who had a vibration when it was cold but went away when warm? Any ideas on that?

not sure if anyone is up for this but saturday night there is a cruise in sutton i do believe it starts at about 7pm anyone up for this?

i just started getting more towards the 300zx i was wondering if anybody could help direct me to some sites for body kits. i want something like a 1988 turbo so if anybody can give me links to that generation of the 300zx's it would be helpful

or is it just me??.........fuse has now been lit! [This message has been edited by syko (edited 29-11-2001).]

I am thinking of buying a 300zx '91+ TT manual, although I have been told to steer clear of manuals as the gearboxes are weak, is this true? Also, I am worried that spares for an import may be difficult to find, and expensive if available. Is there anything specific that I should look out for?

the link is www.ttzd.com/tech/ecutech.html now fit em.....

I finally found the Redline MT-90 gear oil for my manual gearbox TT. £47 for a US gallon delivered from Delta Oil Ltd, the Redline distributers for the UK. Speak to Gavin on 01476 861195 and mention the site for the discount.

"Jesus lady, you nearly poked my eye out!!!"

Following on from my breakin, thanks to everyones help on here I now have; Window sorted (assuming its still there tomorrow morning), thanks Timmy for finding that one, should have it Monday Centre console bit sorted, thanks to Glen for that Dash sorted, thanks to TT Tim for finding that and offering to pick it up and then meet me half way.. So all thats left is to put it all together.. Window should be.. er.. fun.. I guess.. And sort the alarm out - looks like some wires are broken so I guess a call to Bob will be in order, when I can look at the car in the cold light of day (i.e. Saturday, when I peel the four miles of plastic off the side of the car…

Hiya folks, has anyone got a spare 225/50Z16 for front hanging about only my left front is worn on the inside edge and I want to try another tyre on it to see if it cures a vibe I've been having, not bothered what make it is just thats it's 'Z' rated... CheerZZZ Jonny Boy...

I took my 92 UK TT to SE to have some problems looked at, they were: 1. Bad oil leak 2. Engine runs lumpy 3. Some white smoke at start-up from driver’s side There were a few other things like timing belt change but not much else. I have just had a call from them stating the following: “Having looked at you engine we have found that there is low compression an all cylinders, in particular 5 and 6. This is probably due to head gaskets leaking and could well need new valves and rings. The only way to sort it is to take the engine out and do a complete re-build for a set price of £2200” Ok, now I’m not looking to start an SE good or bad debate. …