General Discussions - 300ZX Related

Anyone know where I can get a set of the little bulbs for the side repeaters. I want ones that are like the Phillips Silver Fusion ones you can get for the front and rear clear units. Any ideas? ------------------ Z first and anything else is secondary! John Newcomb (NukeEm) www.geocities.com/jn300zxtt

Does ne1 know where I can get a pair of solid alloy wheel spacers made up. Wait for it.....about 5 inches thick! I currently have steel ones and they kinda weigh more than the car. Cheers Andy

What do you think went through the guys head when this happened??

Thought you all may be interested to know the outcome of my antics yesterday when i had a good old blast with a V reg Corvette C5....Hey stupid don't even bother,you may have 5.5litres under ya bonnet but i have Jap turbo power. At the set of lights on the A10 in Enfield he pulled up next to me revving his engine and looking over at me he said,and i quote "so what the hell is that thing?" to which i replied "It's about to kick your ass!!!" so you can guess what happened next....yep you got it we went for it big time and when i got up to about 90mph he was about 10 car lengths back and just a red blip in my rear view!!!! ZED 1 Vette 0 Ha Ha Paul

Got an email from Trevor Tan from http://www.visualdynamics.ca , he's the guy that supplied the previous tt.net group buys with the Philips Z32 HID headlight Kits. Heres some of what he said: If this group buy goes ahead next month and 20+ people go for it it would be approx £272 which seems to me like a good price and a reason to start saving. So what would be the interest from UK/Europe Z owners? Bearing in mind that we would have to pay VAT and duty etc(unless anyone has a way around it?). Have a look at his site http://www.visualdynamics.ca for comparison pictures to see the difference this kit makes and search on tt.net for how many people…

(taken from SeedyRoms post on tt.net) ------------------ Trev 1990 300ZX TT 2+2(import) http://www.300zx.co.uk/rides/trey/

I've got 99 sparkplugs for Z32 Turbo sell as a job lot, or in sixes , twelves , whatever. ------------------ (^-^) 07812 931031 (^-^)

i saw the thread about this and would like a recommendation on the best combination for my Z. Ap racing paddle clutch and SE Nissan close link gear thingy seem to be most popular. any other ideas and how much would it cost to get the two? and whats happened to the se-nissan website? [This message has been edited by Baba-Jan (edited 07-05-2002).]

Just wanted to say if anyone needs an mechanic who knows(and drives) a 300zx, then let me know. He's just helped me out sorting out my brakes and while chatting to him, it turns out he worked for Nissan for 15 years and has done all the Nissan training on 300's. He's worked on them since they were first out. Vijay

hi guyz what tyre profile will I need to keep things true would '40 be OK for rears and '45 for the fronts or shall I go to '35 and '40 respectively. Also can I fit say a '265 to an 8"J rim?? cheerzz anyone.....

Please ignore the other advert for the wheels I have for sale. The photo didn't come out. Anyway, £180 I'm after. 16 inch. Same size as Nissans standard wheels. Photo below (I hope !!)

Just got a set of 16 inch aftermarket alloys (exactly the same size as standard Nissan alloys) Tyres included (although they're not very good at all). £180 is the asking price. Photo shown below .......................

just wondering... and i notice jeff has these on his website, which car are they for? as the jap and uk models have different parts, for example the shocks are different on uk and jap cars. or does the catalogue cover all models? thanks in advance

anyone know why on the links segment silvia engineering under contacts isnt working . it comes up with a loads of c***.or can someone tell me their web address

Bearing in mind one of you guys is in there next month, I'd have a word in their shell like. In the top 100 cars bit they list the 300ZX TT as 0-60 in 7.1 secs and a top speed of a measly 148MPH! HHHHHHMmmmmm.

Just thought I'd let people know what happened today. I was jacking up the front of the car (from the cross member) and just putting axle stands under the side rails. They were just about in place, but I had to get the car up just a little bit more when suddenly the jack slipped from under the cross member. Luckily for me the stands were just about in the right place, otherwise I would imagine I would have done a nice bit of damage. I used a small woulden circle the fits in the jack and was told this would be fine, seams not. The car always seams to move slightly on the jack when I'm lifting, but I read this was normal. Does anyone have any advise that might stop thi…

Any news on these mate, I thought you mentioned they had landed. Ta ------------------

I've changed my front brakes callipers and rotors and took off my rears for cleaning/spraying. I got them back on no problem, but last week I couldn't bleed the fronts as I kept getting air coming through. That turned out to be the master cylinder leaking and I put a new piston kit in today. The problem I now have is I can't get any pressure on the pedal. I have bled the brakes 3 times (using instructions from TT.net and the Nissan manual) and there is no more air coming out. Unless I pump the pedal, I get no pressure and after about 10 seconds after I get pressure I press the pedal again, there is no pressure. Please, any suggestions?????????? Cheers Vijay

In order to test to see if my Autometer gauge is reading properly, Craig has kindly offered to let me hook his Blitz gauge up to my car and go for a test run. The difficulty is that Craig doesn't have the required pipework to attach the thing. The connector on the back of the gauge looks like this and he has some 2.5mm poly pipe that may or may not be anything to do with the gauge. Does anyone have any idea how this gauge should be connected up? It's a mechanical gauge incidentally.

All, Its finally happened. The insurance company have settled the claim and I can now break up the car. I will be taking the car to Jeff's (for breaking) in 2 weeks time when he arrives back off holiday. Give me a call on 07973 720987 if you're interested in any parts. Now is a good time to test drive the car if you are interested the the auto box (recon'd and uprated)or engine etc before its broken up. For those who have already emailed me - I will contact you directly. Cheerz Andy

Chaps, Chappets & Warren Does ne1 know if there are any compatability issues with US in-car hifi's against a UK or European spec hifi or is it basically the same kit. I want to order a double-din CD player system from the US (well under half the price) but I want to be sure before I order. Cheers, Andy PS. Warren, just kidding m8 LOL

I drove to Edinburgh and back at the weekend (via Derby), a grand total of 870 miles and how many Zeds did I see? A big fat zero. I suppose you lot were all playing GT3 or out playing golf. Next time I'll demand a Z welcoming party at the border (that's the border level with Watford Gap) to escort me into your strange Northern land Gits the lot of you ------------------

The group buy on indiglo gauges The Z forum clothing Are they still happening? ------------------

http://www.saunalahti.fi/~garon2/bombgame/ ------------------

Hi, thinking of getting one but not to sure,has anyone got one?. Andy