General Discussions - 300ZX Related

ive just pulled mine outa the car its fucked! anybody got one?

Anybody ever taken the tailgate off their car just wanna know whats involved especially where the loom is concerned... cheerzzzzzzz.........

Do u have 2 dismantle the whole lot or is there an easier way?

I have a Sony Radio/Cassette and a Sony CD changer. The Book of the Radio says it has CD-Text on it but I cant get it to work. Does the CD changer have to be compatible? I have searched the internet to find out if they both have to say CD-Text on them but cant find anything. I have a Sony XR-C7500R Radio and a CDX-605 changer. Does anyone know how it all works? Stuart

When driving with the window open i sometimes get a smell of petrol.But it dosent seem to come from out side I wondered if the petrol sender was under neath the back seats or boot carpet.I have spoken to SILVEA ENGINEERING they told me this was common just wondered if anyone else had this problem or knows how to solve it cheers Spencer

I had a look at doing this but was slightly flabbergasted .. is it the sort of job that can fook ones engine if done incorrectly? I have been quoted £200 to have the job done by Abbey Motorsport, plus the £100 for the round trip.. seems like I should have a go eh? I was gonna sell it but I might as well plumb the bugger in really. Another think I was worried about was fuelling.. am I right in thinking that I can be conservative with boost settings and not actually have a new ECU for fuelling? Do I need a remapped ECU installed to actually use an extra couple of PSI that the EVC can give - I am currently only getting 7psi and cannot locate the reason…

I've brought my PC down to Wales and have a new BT line. Every few minutes I get a pop up saying "You have just ignored an incoming call". I've spoken to BT and they tell me that I don't have call waiting and don't have 1571. I'm running XP. Any ideas ? Cheers Dave

Well, just finished watching Episode 2, WOW what a film, very dark and complicated, much better than the shite Episode 1. Oh the joy of buying anything you want on the internet.Have to go see it at the local flix now Regards JOHN

http://website.lineone.net/~p_joshi/pic2.jpg

got ya cheque m8..sending trim tommorow. thanks jay

My Z failed the MOT, not that I was suprised. One of the things it failed on: Front suspension top mount Does anyone know of an uprated supension top mount or do I have to replace it with a standard Nissan one? I know HKS to a solid top mount kit but I think that would be a bit pricey! Cheers, ------------------ Trev 1990 300ZX TT 2+2(import) http://www.300zx.co.uk/rides/trey/

Hi every one heres a little poser for you lot when my z is stationary and i hold revs up to 18/2000 revs the car either vibrates or is missing very hard to distinquish which any thoughts! [91 uk tt auto] cheers Dave PS just removed my stock radio/cassette and cd player [under cassette]out to fit kenwood demask system do i keep the frame work!! in which the radio cassette/ cd player is carried to enable me to fit said system or leave it out?

the nissan micra only comes in 1 type of flip chromoflair paint. if anyone has any pictures or links of the micra with the paint please let me know.

Does the oil pressure guage give you any clues about the oil level? After the oil change the pressure would rise to about 100 psi on idle then slowly drop to about 30 psi after 15 minutes. Now the initial rise is still to 100 psia but drops almost immediately to 60 psia before hitting 30 psi after 15 minutes. Does fully synthetic degrade to give this effect (oil is 2500 miles old)

I want 18" black/ anthracite coloured alloys to fit my Z! I can't find them anywhere except Gran Tourismo! Can anyone help?

Fuel pump started humming, brought it to the mechanic and he said its located within the tank itself and replacing it is troublesome. Recently the humming increased considerably. Anyone know is this a big job and how long after the noise will the pump fail???

After many years of tolerating the gurgle behind the driver side fender I finally decided to sort out the AIV's and filters. I remove the cover and out drops the alarm klaxon, held only by it's cable so it appears that I can't tell the difference between a rattle and a gurgle . If I ever get hold of the alarm installer he's going to be singing soprano for the rest of his life!

Brian if you are around give us a shout over the week end. Most bring the Zeds out for a proper spin(also compare 0-60 between new manual and auto) My number is 086-2232190

When one turns on the lights (side or heads) the Air Con display, clock backlight and some other stuff dims! I want to turn this feature off, or add a switch - anyone have any ideas - before I start burying my head in the Zeds circuit diagrams??? Sorry about the dual posts guys ;-)

When one turns on the lights (side or heads) the Air Con display, clock backlight and some other stuff dims! I want to turn this feature off, or add a switch - anyone have any ideas - before I start burying my head in the Zeds circuit diagrams???

its a front clip with the vg30dett motor and this is what it has: 1.1.2 millimeter TOMEI metal gasket 2.Trust racing spark plug 3.OS Giken twin plate clutch 4.Blitz blow off valve 5.HKS front mount intercooler 6.60 millimeter down pipe X2 7.Air flow - controller, 8.M and S boost meter 9.Trust turbo timer 10.C¡¯s short shifter 11.280 ©N Speedo 12.304 stainless steel 5-zigen Single mufflers. 13.Motor has 19,074 miles on it and has 175psi compression on all 6 cyl Suspension: 1.ECR33 caliper 2.Project ¨C MU rotor, 3.BNR32 LSD 4.Cusco. Rear toe rocker arm 5.CUSCO R/CONTROL ARM 6.ARC Strut tower bar for F/R 7.JIC Coil over with …

hks type 1 turbo timer instalation instructions wanted. not the notes on hks site somebody sometime ago told me where to find another more detailed set of instructions to fit my hks turbo timer, can that person show me where to find that site. many thanks jaylox

Regression......... http://rally.jowood.com/rally.html Build your own track and race away!! There are loads of TopGames to while away the hours! http://www.fhm.com/games/topgames/frames.asp Matty. ------------------

With all of these 300's being broken there must be loads of screws, clips, trim fixings, etc. left over. As I am missing loads of little screws here and there from all over the car if any one has a such a bag of assorted trim screws, clips and fixings - let me know how much you want for it. ------------------ Z first and anything else is secondary! John Newcomb (NukeEm) www.geocities.com/jn300zxtt

I was supprised to find out just how much I could fit into a Zed. All the stuff you see here, driver, passenger, sub and drove about 10 miles. And people say these aren't practical