General Discussions - 300ZX Related

i'm after the manual, and was wondering whether anyone has it in a downloadable form? cheers Steve

Sorry for monopolising but I think this is the last for now. I registered a bunch of domains and could give you temporary e-mail addresses on the following nissanidiot.co.uk nissanidiot.com nissanmotor.org.uk nissanmotorgb.co.uk nissansucks.co.uk nissansucks.me.uk I can't afford to do all of them (it costs £31 per domain for 2 years to activate 100 e-mails) but would be happy to do the most popular - assuming any of them are popular! I'm off again for a week so if you e-mail me, please hang on for an answer until next w/end at the earliest. Cheers - gio@nissanmotorgb.co.uk

OK so maybe I over-reacted. But that Parts charge still p***es me off. Even though there are good parts suppliers and engineers outside the Nissan franchise empire, it still riles that I can't get proper service from the local dealer. So I started a website http://www.nissanmotorgb.co.uk The forwarding should get sorted soon when the frame disappears but you can see it anyway right now. Yours - Disgusted of Tunbridge Wells

While I was seething about the damn-fool Nissan Motor GB parts charge (about which more later), I noticed that a couple of nice domains were unregistered. So I registered them www.300zxtt.co.uk and www.300zxtt.com I want one of these for my own Zed pages but would be prepared to let the other go to a fellow forum-ist. As long as it is for a good cause and not sold on for vast profit without cutting me in on it. If you want one of these, e-mail me with which one and why. Preference given to ideas which support Zeds in the UK and this forum or the Z Club. A bunch of others follow! Cheers - Gio

Hallo All, apologies in advance for a few posts about to be, er, posted. I've been away. They don't allow us anything sharp, so I've been belting some html into shape with a cheap keyboard (so don't expect anything flash). First one is at http://www.netcomuk.co.uk/~webster/gio/gioindex.html Includes new-ish pics of 3 different types of exhaust, expanded sections on turning indicators / repeaters silver, a/c fan in roof, Jeff's headlight mod and Horton (aka Slough) meet - Gio [This message has been edited by Gio (edited 19-05-2002).]

just had stage2 turbo technics turbos fitted and r boosting bout 11-12psi if i fit 1mm boost jets what will the boost be after im guessing bout 16-17psi is it safe to go this high using an se-chip and stage 2 turbos with 360' bearings or do i need 2 upgrade other engine internals, oh and what bout the dreaded detonation????? i also have the se-maxflow kit and the standard exhaust which is de-cat any help appreceated cheers guys

saw this and this: and decided I have to have blue dials So how can it be done and does it cost a fortune? BTW I prefer just having the characters lit in blue would look totally class in the zed I can imagine it now [This message has been edited by Clarkey (edited 18-05-2002).]

hello timmi m8 am thinking of taking my car to abergele to dave buckley i think u said on a post a few months back he works at threeways garage, i have a major oil leak & cant find where its coming from, b great help if u had his no or do i just go there and ask 4 him, cheers bud

let me no the details for tommorow.gonna try to make it!!! ive texted u terry . jason

...yesterday. Whilst driving.....somewhere....can't even remember where we were going...sorry - having a blonde day - I saw one (1) black import with high level brake light and one (1) Zed convertible in what looked like metallic blue zoom past going the other way round the M25. They were going clockwise, we were going anti-clockwise. Oh and I know that no one cares but we were going to a Meggido gig in London. Remembered!

ive done about 10 thousand miles since i got my tt. after the first thousand my gearbox started to whine abit. i thaught it was the clutch release bearing. it was gettin quite noisey now so i booked it in at nissans. turns out its not the clutch its the bearings in the box. they told me its a complete box strip with all new bearings.quoted me aprox£750. i pick it up wensday. my car has done 65 thousand.is it normal for this to happen or have i been unlucky? and the price sounds reasonable considering the work involved. what do you lot think? dave

Hi, Just thought I would fill you in on the days proceedings! I thought I would try and repair a minor coolant leak in the Z before I was gonna it on the Long trip ,to Peters to get it sprayed. The leak in question is on the hose between the housing for the temp senders and the block. It is Saturday so I thought I had better get the hose to repair it before the shop closed! Take everything apart and the hose I have is too tight to fit on or too big for the spring clips to fit around it. Will have a look in Halfords Tomo see if they do anything. I have also decided to upgrade my old socket set and go for a whizzbang new one, does anyone know of decent web…

decent ones only though,

Gunna get my z re-sprayed soon, 1 because some twat keyed the drivers side plus the paints fading so I thought at the same time I'll replace the window seals. I need to replace side window seals plus the rear window seal. for some reason the rear window seal about 2 inches is missing is this a sign of rear damage? Anyway does anyone no the best place to go to get replacement seals? Cheers rob

had the cam belt changed at nelson maindellas and they made a real mess of it. left clips off hoses. so i took it back, then after they claimed they had sorted it out, I drove up the road lost all coolant and blew a head gasket. Took the car back last saturday and they said they would sort it out. I phoned on thursday and they said "yeh there man is on the job getting the cylinder head off" cool i tohught. So i turned up today (sat) to get some cds form the car to find it the car hasnt moved from the space it was at last saturday! and nothing has been done at all!!! phuken can you believe it! Anyway i have told them i have had enough of them phukin my car up and that t…

Hi Guy's Is it right that for 18" wheels you go up 2psi per inch. So for 18's would that be 34psi allround. Any info much appreciated. Cheers Dave.

another kwik ? what are good tyres to have on rear ie for wet conditions.

hi all just a kwik question. my 90"tt import got 225/50/16v all round is that right or do i need bigger on rears?

I have two standard back boxes nearly new still have stickers on them.Would anyone like to make me a offer as i dont know what there are worth second hand Cheers spencer

Tezza is waiting on the A19. He shot past your place so fast his brakes wouldn't stop him! He'll give you a 2 mile head start up the A19 if you dare... Your wide arse is too fat to keep up mate

Help! I'm trying to find modem script to work with a Samsung mobile my Mac laptop and My Psion 5mx. I have both Ericson and Nokia scripts but I cannot find any for the Samsung The phone is the A300. Any help would be appreciated. Tim PS: Herman - I await your predictable response [This message has been edited by TT Tim (edited 18-05-2002).]

As I have had to sell my 300zx I have a Standard exhaust and suspension shocks for sale. The parts came with the car when I imported it, so I am not 100% sure how many miles the parts have done. Any reasonable offers considered..Buyer collects email - martins@itmindset.co.uk or Phone - 07748 702507 (Based Near Dartford)

Just some links an pics from my travels on the web Interesting front on this Z32: I saw a white Z at SE Nissan last Saturday with similar indicators. Sorted 240Z: Japanese site called "Z-CHANNEL" http://homepage2.nifty.com/hokka/ Got some good pics of a well spec'd Z32 here: http://www.ai.wakwak.com/~zcar/001.htm the guy has HKS 2530's, HKS Intercoolers, Border Air Cleaner Kit(twin filters looks good), HKS Hiper Damper with Pillowball Upper Mount etc etc Japanese Links: http://www.cna.ne.jp/~you/link/link.html http://nissan.fc2web.com/fairlady.htm ------------------ Trev 1990 300ZX TT 2+2(import) http://www.300z…

Oi Tooley, have been trying to contact you m8 Got these 'things' in me shed for ya Tried calling but no answer - just the orange answerphone which I thought was Johnny LMFFAO Get in touch m8 CheerZ, Andy ------------------ Log onto Tech info for the latest tech info :D

hi all new face on site.just a small question.i have a tt fairlady 1990 import. when i get to 110 i cant go any faster. also its an automatic. any one else had this prob if so plz can u give advice on how to rectify it. cheers.