General Discussions - 300ZX Related

Is it possible to do a diagnostic check on the steering of a non turbo 300zx. If it is possible does anybody know how I would go about this? and what the response codes mean. Cheers Mick

Does anyone know if tail pipes from a TT will fit a non turbo import?????????? Alex

anyone know where the power window fuses are ? Cheers,

Ok i've found and am about to buy a lovely import Fairlady,it's in very good condition both bodywork,engine and interior. It has 44k on the clock and is a non turbo manual. It doesn't have cruise control but has all the other extras,electric seats,windows mirrors etc.Very nice cloth interior. The only thing i don't like is the exhaust.It has one of those huge single pipes both sides but i'd much prefer the standard ones.Does anyone want to swap or do they have them for their standard pipes or do they have them for sale? The other thing is i have a very nice TV in the car but unfortunately it only works in Japan (NTSC) does anyone have a spare tuner or …

Nothing to do with 'Z's this one but I 'm after an A bar(bullbar type thingy) for a Misubishi Shogun. Has anyone got any contacts with the 4x4 fraternity or know of anywhere that I can get one for a reasonable price? Cheers, F.T.

I have just replaced my front discs cos they were shot away....and they were causing a "pulsing" through the pedal. I have allowed time for the discs and pads to unite....but occasionally they still "judder". Would this be the front torsion bar type thingies?....as in the bushes need replacing? Anyone any ideas? Chris:confused:

There's a car on there I'm thinking of importing - 1990, manual, silver (gay colour but never mind.. :D), no registered mileage so it could have been to the moon and back but, it's a manual, and I'd have spares from t'other car.. The car is Y220,000, which is about £1200, and shipping looks like about another £800, but has anyone used this company before? (http://www.tau-net.co.jp) Presumably it turns up at the docks, I take it off, get it trailered somewhere, MOT, send everything to the DVLA with some cash and then insure it..?

It's all go for me, I've noticed over the last few days, again in the morning my car is juddering in 1st and 2nd is it cos its cold? might it be the fuel (again) ...Yawnzzzzzz any ideas, help appreciated:)

Alright guys, we all know about the 99 spec front bumper but are there 99 spec side skirts aswell? Just seen a pic of a pretty new Z and it looked like there were different but standard skirts? Cheers. James.

Not much of an achievement but I thought it was funny enough to share. At a set of lights with the mrs. A Nova GTE with 2 spotty oinks and their snatch in the back pulled up next to me at the lights. I couldn't believe it when they started revving the engine and then when the mrs told me they were looking over at the car sizing it up, I p*ssed myself laughing. Anyway I let them pull away on Amba with their "jumbo jet" exhaust and wide wheel arches with extra low profile tyres on split rims which looked like they cost three times more than the car itself. I decided to press the green launch button on my traction control and hit the gas, While the revs were bo…

and my clutch will let go ! Gets to about 4 1/2 thousand revs and slips. Does anyone know of anyplace in Kent where I can get a new clutch fitted ? I've promised myself never to use a Nissan dealer again but I seem limited for choice down here. Also what's the best replacement clutch ? I'm running about 400 bhp. Will a stock one suffice or should I get a better one ? RPS ? Regards

Posted recently about the problem I had with my auto being stuck in 1st gear. Disconnected the battery for a few days as it had gone flat. Jumped the car tonight and it's sorted itself out. For those that may not know, disconnecting the battery for more than about 30 mins resets the ECU. Whether or not that was what had got its knickers in a twist I will never know but it's sorted, which is the main thing.

Folks, I'm having some MAJOR stress trying to get a decent quote on a jap import TT. For a 27 year old, with 3 years NCB, 1 theft claim, I'm being quoted almost a grand on the dot....and this is for TPF&T! Can anyone point me to someone who won't commit day time, legal robbery, and instead will give me a reasonable quote??? Andy D, why oh why did you decide to put your car up for grabs. It's causing me nothing but stress and sleepless nights!

Have been looking for a late TT to update my 96TT.Just spotted this 1998 manual at http://www.mcminn.co.uk Any of you experts know: Is "pearl purple" a factory colour? Are these factory wheels on late cars? Any other important differences from my old car?

I was just about to post a sneery manual vs auto comment in that thread over there when I got a problem with my clutch. Oops. Can you ever forgive me. Anyhoo the problem is that (and has been for three and a bit years) the bite point on the clutch pedal occasionally changes. Not gradually, just suddenly it moves a couple of inches down the pedal travel. Still works fine and everything. Then some time later (could be days or minutes), there's a change in the feeling of the pedal and the clutch bite is backwhere it was. Today it happened again - and the bite point was suddenly about half an inch above the pedal so the clutch never fully disengaged. Would drive ar…

hello. Just bought jap import 300zx. Got mental two deck expensive looking kenwood cd and graphic thing goin' on up front, but sounds REALLY pants!! Had a poke around & although mechanically retarded, found tiny miniscule stock speakers in boot, and after reading how to take off door skin, gave up hunting for front ones, although by the sound kicking out of them, possible from old alarm clock!! Want to keep head units, but need advice from all you seasoned owners out there what the best set up is. No worries going out buying the stuff and fitting, but releucant to give to any high street monkey to be ripped off. 'Bob' is mentioned often within this site,…

blue one, 8:10 ish this morning going past cheshire innovations park towards m56. white one in aforementioned park - nelson per chance?? kewl

http://www.courtesyparts.com/z32/z32-tbkita1.html Chaps this kit comes in at 346.35 dollers, whats that mean in sterlin. One i have payed for it and all the tax involved etc. Cheers. Mike.

Are they reliable?

I need a set of brake disks for my 1990 N/A Jspec. Nissan have quotted me £80 each plus VAT. I have tried the disks that brembo have listed for all Z32s but their slightly different disk, although only £40 each. After doing a little research, I have found that there is a different disk on this particular year of N/A. does anybody know where I can get a pair cheapish.

where do they go exactly?

The plastic has worn off of my platsic coated trim that runs up the side of the windscreen and over the targa roof. does anyone know where i can get cheap replacements or get these re-coated. Help would be appreciated Mick

Guys I was involved in a car accident this Saturday and the Zed is no more :( some twat pulled out in front of me, and now the zed looks like a squashed kebab! So by the time I see any insurance money and by the time I find another zed, I might as well sell the bigger intercoolers I bought for them, they have never been fitted or used so are spanking new, they cost £500 I'm willing to let them go for £440 no offers, as you know bigger intercoolers for the zed start off at £600 and upwards. Buyer collects. email me if you are interested at mark.salem@landg.com Also when I get the wreck back I will have a leather interior and ECU to sell.

I posted a few weeks ago about my Dump Valves no longer making any noise (and not dumping)... I started thinking about when it stopped and realised that i'd used Ordinary Unleaded (95 ron) when i 1st got the car and Super UL (97 ron) ever since..... It was about this time i started noticing the valves not working.. SO - on Sunday i used 95 ron again and 100 yards out of the garage............ Bitsshhhhhh!!! They work!?!?!? How odd... Ive a TT 2+2 Jap, i thought it would need at leat 97 ron (maybe 100) as it was an import?!??!? Help anyone? ps. what the HP supposed to be on a 300?

Anyone know where I can get some alloys at a good price, pref over the net? Also, what's the widest wheel/tyre you can get on the front and rear without mods to bodywork and what are the offsets? Cheers, Carl