General Discussions - 300ZX Related

Hi, does anyone know the best place to mount the fuel cat? Any pic's would help too.

Hi. Just wondering of it's ok to share the same signal vacuum hose I use for my Profec B that is routed in behind the centre stereo facia, for the sensor for my Greddy Electronic boost gauge, having them both tee'd together and sat next to each other. I thought about plumbing them separately but firstly I didn't want to run anything else through the bulkhead if I don't have to, secondly I thought It'll just be another potential leak point if I do, and finally, that the plenum is covered in vacuum lines that are tee'd into each other and split off in various directions anyway... Is this ok to do this? I was just worried about one interfering with another, causin…

Ok a typical newbie question..... If I fit an exhaust without a cat, will my car fail an MOT on emissions? Or are some cars exempt because they were manufactured before a certain year? My car was manufactured in 93.

Anyone on this forum drive a Zed 32 thats Black with red wheels??? Saw you in southampton,Regents Park this Weekend.... :p

how the HELL do you change the headlight bulb? I can't see a way without either taking the unit out, or half of the engine :shock: I need the car drivables within the next hour or so :( any help will be GREATLY appeciated!

ok guys was going to sell my zed but got a garage to keep it in for the winter i live in Malvern and want to know where to take me zed to get uprated brakes and a chip upgrade in the midlands any help appreciated :cool:

My Jap spec has an orange warning light with an engine icon on it. I am sure it comes on if there is a problem with the engine management system. Here's the question. If it is off (as mine is) does it mean that there will be no Conzult Error messages. Chris

Hello all, Can I be cheeky and see if anyone who lives near Hornchurch has a conzult and would let me do a check on the car today?? Lots of Pleases, beer in it for you :D Cheers Ant

My 300 has the Race logic Traction Control setup, a friend has had a laptop on it and confirmed that it is correctly set up for the car, but thinks it is not getting the correct RPM feed from the ECU. Hence it doesn't actually cut at the right time. My question is does anyone have the correct pins outs that I need, or any advice on what I can try? Thanks

Just got a nasty surprise while attempting to change a headlamp bulb on my UK Zed. The previous owner has used some odd bulbs and spliced a double spade connector into the loom to connect to them. The bulbs have the sam two notches as the standard halfords type 453 that I was expecting but also have two spade connectors. They also have the marking X1JR on them. Anyone have any ideas what they are and where I can get replacements since halfords are no use for these

As it says above, three :cry: stock injectors needed or the little cap on the end needed asap. Cheerz Mat

Saw a nice looking metallic blue zed crusing around lancasters one way system yesterday. It looked and sounded very nice. I was still half cooked from the night before so didn't see any particular details.

As title says

Who are you then??? Tuesday or Weds morning about 8.30am A444 bermuda park. :ttiwwop:

Just turning off the island as i was going on it , flashed at you (must stop doing that i,ll get arrested one day) :rofl:

Hurrah! Car hasn't moved for about 7 weeks so I was well pleased. Not a word about the emissions but they did 'remind me' that the front pads are wearing - I know that, it's happens when you put the brakes on ! :slap: Anyway, that'll be an excuse to put my new carbon kevlar Porterfields on then.

Dear Members, I'm a Newbie and joined your forum today as my ZX has just arrived today from Japan. Can anyone advise me on making my vehicle legal for the UK roads. I've been told that it just needs a Foglight with indicated switch and I can then insure the car, send the paperwork to DVLA with £38 for plates and the money for either 6/12 months road tax. Is this correct? Help please!! I'm in the North East, Teeside area. Kind regards Wayfarer

Have any of you guys got an N/A with engine mods ? Ive had mine for a couple of months and Im thinking of pulling a few more horses out of it, what are the best (simplest) mods to start with, and what kind of power gains could I expect cheers.

Guys i need help, my No1 coil pack keeps blowing, have put another one in this morning and started the car, within 3 mins the coil pack was red hot and blown, all the rest are fine. HELP. :headvswal :wack: I know someone must be able to help, co's im sure this aint the first time this has happend, i have searched the forum but cant find nothing...

Hey Guys, I've got a problem!! The hand brake light on the dash won't go off even when the hand brake is completley off, any ideas?? :headvswal Jon

What was going on in Stevenage it was a zed fest the other day! i had one behind me as i got onto the A1 going south, then saw another silver coming back past tescos near the stations and then saw another in the leisure park (and by "leisure" i use the term loosely)

Hi All I just picked up a complete pcv kit (valves and pipes) here in the USA, and the pcv valves, while they are obviously the right part (I checked the diagram on the Concept Z website) are different looking to what I was expecting. My car has 2 rather ugly plastic valves which are falling appart and sit just above the boost hoses by the throttle bodies. I need these two as well as they literally fall in half when you touch them. What are these? When you open them up they have a diaphragm inside and have a hose either side. Obivously my car is in the UK so I can't give any more detail than that... Cheers Derek

can any one help i have a uk spec zx when i bought it the passenger side headlight dip beam was wired into the drivers side so i decided to connect it back up and hey presto dim dip worked but the passenger side headlight sometimes works ok and others it won't work however dim dip always works with no prob so is the problem my dim dip unit or the main light switch? also where is the dim dip unit located? now to my second problem my cruise control won't work it turns on but thats about all it won't set to a speed, when i was poking around under the bonnet the other day i found to round sensors one on each side which take 3 vacuum pipes and have 2 wires plugged into the t…

At about 6.45pm tonight going into Glenfield Hospital, you waited for an ambulance to come out, kind man :D It was an Import thats all i saw.

Has anyone fitted or knows of anyone that can supply/fit a front brake line lock ;)