General Discussions - 300ZX Related

hey peeps, dont really know how to ask thi but I think i must. See, I'm in a bit of an awkward situation, in that I wor with a lass that I really like, but I dont know how to tell her that I like her. What do I do? baew in mind that we re both coppers and we both work in the same station. really guys, your help would be appreaciated. Rob.

have u still got some indigow dials in stock mate? I have a 1992 N/A and want some dials, so let me know please! Rob

hi all can anyone tell me if there is any diference betwen a ptu on a NA and a TT? its on a series 1 car. cheers Rich

Hi. I don't post on here much, but I really have a problem I cannot solve. I have an '85 300z, non-Turbo. Recently the engine harness caught fire under at the EGR. I guess it was up against the EGR mounts and over heated. I cut out the bad section, about 3" and reinserted the same gauge wires with butt connectors. Didn't start. I then found the fusible link's box and replaced the burned fuel injector link. Didn't start. Then I replaced the fuel pump fuse, voila, it started and ran perfectly. The problem now is that when I shut it off and remove the key, all the idiot lights that come on when you start the car come back on after about five seconds and don't s…

I didnt think you could get F PLATE uk zx32s they must be rare just seen one on the rides section it has along plate holder on the rear so i take it is a uk model.

Ive asked this before but has anyone got a oil filter relocation kit fitted to their zed as i have a trust/greddy one which i have bolted on the suspension turet where the cruise control is normaly fitted but not plumbed in as yet as im worried about pumping oil up hill to it thanks taff.

Does anybody know the chances of me getting hold of the compresor supplied to inflate the yellow rim space saver on a swb z32 as mine was missing when imported i belive these are a nissan item how many people with swb cars have them thanks taf.

hi i am going to bypass my det sensor and need a 5 ohm resistor. went to the nearest maplins they havent got any 5 ohm resistors left so i brought the 4.7 and the 5.6 resistors, which one shall i use? also is it necessary that i use a 5ohm resistor? last question, whats the difference? thanks!!!

Does Any Body Know How To Tell By Looking At The Engine If It Is Variable Valve Timming Or Not. I Am Changing Engine For Later One But Harness Is Different I Am Now Considering Leaving My Harness On But With The New One Being Different Could Be A Non Vvt I Was Told It Was From A 1995. If It Is Non Vvt I Dont Think My Harness 1991 Vvt Would Fit ? Any Body Out There Have A Clue Please

I'm going to buy a cat-back. I'm considering greddy and hks... Among greddy you've got the SP2 and EVO2 and hks drager 1 & 2... Witch one will give the best sound and the most bhp gain on a turbo?

Does anyone have a manual for the HKS EVC series 1 controller? I can find one for the series IV but not 1 J

Link for those with medium mechanical knowledge who wish to rebuild their Differential or change their Ring Gear Set. :cool: Richmond Gears Installation Manual Nissan! PDF Manual download Link http://www.richmondgear.com/ringandpinion.pdf :) All But Nissan Below just for reference link http://www.drivetrain.com/ringpinioninstal.html

Does anyone have a red z bonnet badge with gold outline mine came with black and silver then changed to black with gold from nissan dealer then red with silver on a yellow front panel red looks good .But now im after red with gold i know these excist because ive seen one but i dont know what model or year it came on thanks taff.

Fitted a nardi steering wheel and boss today took off centre pad to reveal centre nut unplugged a white plug and unscrewed four screws around the hicas ring sensor pulled ring away couldnt find how to unplug this so i cut through all of the wires .End result no horn but no hicas light on dash is one of the wires i cut the horn wire if so what one thanks taff.

What sort of money would it cost to have a wide arse kit fitted to my 2+2 please. BUT! I have something I want done to it that will need a bit of extra work but will discuse this if I get any response. Thanks Vini :cool:

Hi Guys just been down to Bournmouth for a couple of days , and have a small problem with the climate control , I set it to 25 and everything is ok for about an hour of driving up to temp fine then seems to stop working ,only seems to be on a long drive , any ideas would be greatly appreciated , I tried the search but nobody seems to have had this prob thanks Guys Tim

how come i can only go back 500 of my posts .... i want to know who sent me something from way back and i can't search that far back!!!

If you find nearly the perfect car, but it's an NA, and you want a TT, how much will a conversion to TT cost, if you get it professionally done by one of the Z experts? Just wondering if it's economically viable.

Hi I hit something on the side of the road at night, possibly a pothole or rock, which burst my tyre, dented the rim and also (according to my wheel guy) made the rim run offcentre, which he says he can't fix. Anyone know any way out for me to avoid forking out for four new rims? Thanks.

I want to replace my red rear bumper reflectors as one is cracked and thy look a bit poo IMO. I have seen the crystal clear ones but don't like them. I can get the opaque ones to match the indicator side repeaters, but, well, lets say they are a tad expensive. I have also seen that you can buy a replacement lens from the states for around $26 IIRC. I have been thinking about making something myself. I have heard of people making something out of an old florescent tube light diffuser and other things. Yesterday I came up with the idea of making a reflector out of the white part of front a number plate. What do you guys think and what else have other people…

Well, after buying and fitting my second hand exhaust I found that the middle box rattled and had a tiny crack on it. Now, I was planning on removing the cats but should I place a straight pipe in place of the middle box at the same time, will it be too loud as it's loud enough allready? Will the removal of midbox affect performance and fuel? Chiiiiarrs peeps

Silver Z , H reg ,spotted driving in EC2 yesterday about 2.30pm... anyones?

Hi, I have got a DVD player and screen off ebay, and want it installed. It's this one: http://cgi.ebay.co.uk/Motorized-Car-DVD-CD-MP3-TV-FMAM-DivX-player-7-LCD_W0QQitemZ5847856623QQcategoryZ67772QQrdZ1QQcmdZViewItem I have been quoted between £80-£150 to install this in my zed. Is this too much or about right? Is it an 'easy' job? Cheers, Chris

I was in a red Zed flashing like mad, my first zed on zed action :dance:

OK, i'm not known for my calm temper on a good day, but today i lost the plot. Ordered a set of new rubber for the front of my car, went to have them fitted today, and when they brought them out, they looked bloody bald... the centre, had great depth of tread, but the side's were less than a third the depth (these are new tyres) is this a con, or a ploy to chew your tyres quicker, i can see no reason why the edges of a tyre should be any shallower than the middle. anyway, i told the guy to keep them, as they were crap, he said i would have to pay a handling charge, so i grabbed the first tyre off the rack, threw it at him and told him to compare the edges…