General Discussions - 300ZX Related

PICS ADDED Well finally got round to re-trimming the interior panels, so gone is the nasty tweed :dance: Must say the door cards were the hardest to do :( took a few attempts to get it right but it's all good in the end! I bought 5 Meters of Leatherette and even with the mistakes i made i still have a fair bit left, although it's about 1.3m wide so wide enough to do the door cards length ways. So all in all not bad, a little brake down of the costs..... 5m of leatherette £25.00 3 cans of proper upholstery spray glue £6.00 6 mini packets of super glue …

just looked at my space saver tyre and it says it should be inflated to 60psi!!! surely that cant be right. that is double the pressure of most tyres and i cant see how a normal garage forecourt compressor would have the puff to blow up to 60psi! Looked on here but cant find anything that goes against it..... http://www.300zx.co.uk/forums/showthread.php?t=29632&highlight=60psi Surely not!

hmmm, sorting out the ICE in my car and I have looked at the back speakers which have been replaced with nice jbl ones, but under the O/S rear speaker there is a strange round box on a bracket bolted to the body! all it says on it is Clarion, anyone know what this is please? Thanks

I noticed that one of the pieces of lens was missing from one of my front indicators. Rather than try to find a replacement piece of lens, i decided to get whole new crystal clear fitments. These have arrived, but there are a couple of issues i'd appreciate running by the helpful folks here: -Any tips on fitting this? I tried removing the original lenses to have a look, but the screw just keeps turning and never comes out. Is there a bolt on the other side that is turning? Anyone have a how-to? -The CC fitment has a hole for a sidelight bulb, while my original ones have this hole blanked out. I have checked the how-to on adding extra sidelights here (in …

can someone help me, i'm trying to sellmy old zed wheels and someone has asked me about offset and Centerbore. on the back of the wheel hub it says 43 one the rear and 44 on the front is this the offset, and how to i measure the centerbore?

some of you may know, that i sold my orange n/a and im breaking my flood damaged TT. the plan was to then buy a mint TT with BIG BHP!!! :dance: but now im getting closer, im thinking about the 200sx ive always been fond of, and last night,i saw a really nice supra!! what should i do, stick with the zeds, or move on? i'll stay on this forum as ots the best by far!!!!!!! any input would be greatfull received. cheers :duffer:

recently i have noticed a metal like tinkling almost ringing at times....noticible when car is not moving (ticking over) but also heard when driving at a constant speed...coming from drivers side...been through a list of possibles such as heat shields, loose trim, and brakes etc.....? sussed it today...my new steel bottle opener keyring rubbing against the other keys... :wack: :D :headvswal

I want to flush my coolant system due to some recent leaks and being topped up with straight water. But what coolant do I need to look for? Cheers

HB mate :duffer: :duffer:

Right i have fitted 5mm leds with the 470 ohm resister as described in previous threads but they are really dull, not as bright as the normal bulbs, which cant be right, am i over looking something. Anyone. much appreciated

as above will a gear box earth not being connected stop my car from starting turns over but wont start would this earth cause that if not connected thanks

Do the disks and calipres fit straight on to the z32?

does any one have i drawing or foto of the small fuse box cover inside the car on the drivers side i have a jap import n/a manual and its all in japanese. funny that eh? my lights, front and rear have gone and also the clock lights and i dont know where to start thankyou matt

I decided tonight id run a datascan, in the document below it shows the results. At fist my left O2 sensor was hardly not moving at all (i though it must need replacing) but then after a few mins it started going back and forth. I was a little worried at the timing reading though!!! I remember someone saying that it would show about 10 higher on the datascan for some reason - can't remember why but might have been something to do with the auto to manual conversion. Also it revs stupidly high - anyone know what this might be any help greatly appreciated

This is a taste of things to come, This is the Overall Winners Cup. Sorry the pick isnt that great. I will post up picks of the rest at the weekend. Also: Big thank you to Steve300zx for organizing all the trophies in his own time, and what a top quality set of trophies they are. :bow:

As written.. Happened when I had to speed a bit in an intersection to get out before another car. The back end came out. Pressed the clutch a short moment to get controll over the spin and continued... When I looked at the dashboard a few seconds later the battery light came on faintly... Stoped the car at home and saw that the lowest belt didn't move at idle. (Heater in tha car also stopped working) As far as I can se it's the Fan & alternator belt. It was dark so I could not see if the belt had snapped... Any other ideas that you guys can think of that might cause the belt to stop moving...

Just after some advise folks have plenum off goin to do a plenum bypass does it matter if i dont drill out the attachments under plenum by throttle bodies just a thought as in tt.net thread advises to do so. Thanks Evo

Anyone know where i can hold of one of those funky little number plates for the front? I want to get rid of the number plate holder and drop it down a little to let more air in!!!! Ta! Alex

I have fitted the LED lights in the pods and the dash, but was wondering how to get the windscreen wiper symbol lit up. I have looked on the how to's and viewed olliex's posts but not clear on how to do this part. It looks like there is a small rectangular bulb holder, but doesnt seem to want to come out. Any ideas appreciated. Graham

Hi bud ur mail is not receiving , do you still need the fuel ecu if so give us a pm or mail me at sykos1@talktalk.net cheers richard

about 5 ish sounded really nice and looked well shiney in the rain

Can anybody tell me if and how to remove the EGR with the engine in? I am away to remove the plenum soon so if it can be done with it off can someone tell me how or even better a link for a "how to". Cheers in advance. Steve

This is currently on my car but i dont particularly like it

When im driving and go over a hole/manhole/etc, one of the front wheels squeeks. Any ideas what this may be? Or how to test for the squeek without being inside of the car, driving?

Today in Weston-super-mare General hospital car park.