General Discussions - 300ZX Related

Anyone know what they are?? 22 23 36 37 UH Done a search and I cant find it.

http://www.mytwinturbo.com/ I want 700hp!

My rear tyres are on there way out 245 45 16s..... i have had sitting around a set of 225 50 16s would these be ok to put the rear of me z?

Wondering if anyone can help me, my Z is in some trouble, it seems be lacking power, i thought it was something to do with one of the coils, however it turns out its the wiring loom running to the injectors, the wires are old and not in the best of condtion, the connections were coroded these have now been cleaned up but it is still running a bit lean not very smooth, any ideas where i can find a new wiring loom, and how hard it would be to fit?? or maybe there is an eaier way? any ideas would be greatfull. :mac1:

anyone in london have a inlet gasket the one that fits under the plem

Are there any guides to fitting speakers to the front door anywhere? Is it a hard job?

Just a random question but who is the youngest Zed owner on here then??

Have a cracking day matey. :D

Happy Birthday Neil, Havw a good day mate. :duffer:

You were spot on buddy ;) removed downpipes today , managed to get a hand into the tubs and found paper jammed in the shafts. They were spinning OK but obviously air flow was restricted. Car now boosting at 90%, massive improvement. :hyper: Must be a little bit more paper left somewhere, not too worried i'll find it eventually or it may burn itself out. Thanks again, apologies to everyone for the constant stupid questions, but I'm delighted to be back on the road :nana2:

a little confused??? My parents were going to buy me a steering wheel for the z'ed Example http://cgi.ebay.co.uk/VALLELUNGA-steering-wheel-BMW-3-5-series-E30-E34-E36_W0QQitemZ320187713704QQihZ011QQcategoryZ40195QQssPageNameZWDVWQQrdZ1QQcmdZViewItem other possible http://cgi.ebay.co.uk/MILLENIUM-steering-wheel-NISSAN-200sx-300zx-SUNNY-hub_W0QQitemZ320185930575QQihZ011QQcategoryZ40195QQssPageNameZWDVWQQrdZ1QQcmdZViewItem We asked if the top (example) would fit and he came up with this answer?? Hi, Do you know if the car has HICAS? This is a system on the car that makes the 4 wheels steer. But some 300zx's do not have this system or have had it 'l…

Can the short block be removed on the VGDETT engine and be replaced with stage 1 or 2 short block from Z1 Motorsport without removing the engine?

I saw you Athene in Regents Park, Southampton today around 4:30pm ish Lol :D

havn't drove the car for a few days as I noticed a rattling sound coming from the engine that rises and drops with engine revs, not a light tappety sound a deeper tap from within the engine, seems to be best heard if held at around 2k while the engines warm, while its cold it isnt as loud which doesnt make sense to me because the engines cold so shouldn't there be more play until the engines up to temperature? :confused:

Well we all know it's a case of "when" and not "if" with these things. I took the ZX out the other weekend and as usual, the car was running perfectly. However as I was almost home the auto box decided not to operate as normal. Kick-down is fine - instant and fast; the trouble is, the 'box seems a little reluctant to change up! When I overtook another car, the RPM needle just went straight into the red until the rev limiter kicked in. The 'box only changed up when I backed off the accelerator. It was still fast and responsive though. When I got home, I checked the fluid - it is nice and pink with no unusual smells (oo-er missus ;) ) and the level is spot o…

Hey folks Just wondered when changing the belt, pulleys and tensioner (as ive got a noisy idler pulley) should the whole auto tensioner be replaced or just the tensioner bearing,I see dan (DTA) does a kit but didnt know if its the whole auto tensioner or just the bearing thats supplied. Cheers Paul

Approx 5.15 this evening - Thursday, looked a goody, larger than 'normal' silver alloys...........possibly ("on") 19's!!!!! Certainly not one of the usual zeds around this part of the World!!

Peeps, Ive just re visited the ztech website for the first time in ages, and see that it has moved premises. I know Chris took over not too long ago and was wondering if anyone has seen the new premises and is it a bit more suitable for the work than the old premises (which to be honest was nothing more than a large dingy hole in the middle of a farm), had any contact with Chris, or most importantly had there car worked on?? In the 2 years of zed ownership i spent a serious amount of money with the old ztech (tbh it was probably at ztechs peak) and i realise that a fair few incident seriously damaged Ztechs reputation for good work. So i am curious to see w…

Hi all I have just signed up and subbed. Im currently on the lookout for my first 300zx TT Manual version, so I should hopefully pick one up soon and I will get some pics up asap. Great forum. I will no doubt be asking for plenty of advise :hyper: All the best Nick

Well i have finally found my leak!!! It was the water pump ffs. See this link: http://www.300zx.co.uk/forums/showthread.php?t=98728&referrerid=5526 So looks like Jack was right Nearly broke my fingers when pulling the crank pulley off as it snapped and hit my hand :rant: Good reason now to buy a lightweight one My pcv valves where all clogged up with sh#t too althought the little valves still worked. The plenum and the hoses of the tops of the turbos where covered in oil. Is this normal?

Hey everyone Just thought i´d point out a Nissan Workshop manual for the Z32 on ebay. Interesting thing is that it´s in English being sold on the German ebay site..so might go for a bargain if anyone is interested. item # 200178560234 :)

Hello all, 2-3 weeks ago I had a cobra alarm fitted with total closure (window closure). My battery was replaced twice in the following week. Got a refund and had the alarm removed. Was told by the AA guy that the alarm was fitted incorrectly and was draining more power than it should have been. Since the alarm was removed I have had no problems whatsoever and its been a few weeks since then. So now I need a new thatcham category 1 alarm/immobiliser fitted with total closure. I want to get a toad Ai606 with the additional window closure and the necessary additional motor for the passenger door (window?) or so i have been told. Best price i have so far is from toadalarm.…

a bit of a long shot as it was three weeks ago, but I saw a red Zed in the Asda car park in Shrewsbury I think on the 7th Nov (Wed). You (the owner) may have seen me snooping around it as you came out of Asda. Are there many Zeds around north Shropshire? It's quite an occasion when I see one!

Dude, as an idea, have you thought about doing a celendar just of your car? After your photo shoot you have the pics and I bet there are enough people on here that like your car enough to have one.

Hi everyone i'm new on here, looking foward to getting to know you lot. unfortunately i didnt want it to be under these circumstances but. i'm from the north east (south shields) just bought a zed with 54k on the clock. had it a couple of weeks and now it doesnt start. can anyone recommend a garage or advice on where to get parts. ive been reading the forums and it has the same symptoms as some ppls on here. at first it hesitates (revs drop) when i press the accelerator then picks up. then I had trouble getting it started and now it just doesnt start. also fan comes on at start up. is there a way of getting codes without taking to garage? …