General Discussions - 300ZX Related

Has anyone used k sport coilovers , if so how do u rate them

what is the thing that sits on top of the rear suspension, it has wires coming out of it, what do i do with it as im changing to teins????

Hi All Thought this might be useful for some We have a maxi cosi Toby baby seat and it goes in the back with a standard seat belt (three point one) It was the only one we tried that gave a good fit. Cheers

Just a quick question...... Can I replace the early type rear lap belts with the later type 3 point rear belts?. Cheers, Richard

Hi there, My driver's side window has stopped working. Could anyone tell me where the fuse is for this please? I've found the fuse for the passenger side (but that works) - is there one for the drivers side? I hope it's not the window motor (again) Thanks Mr Pink

I have heard a lot of great things about Leon at Alunox making exhausts. My car is still at the garage having bits and pieces done to it - it will need a new exhaust for the MOT as the old one is corroded. Since Leon must have done a lot of JDM SWB TT exhausts anyone know if it will be possible to supply an exhaust to the correct measurements which can then be fitted at my garage - or does the skill come in fitting the exhaust to my particular Zed (which will mean having it transported to Alunox as the MOT has run out!) Any ideas peeps?

Is the centre interior light on a slicktop the same as a targa model .The reason i ask is i broke the plastic cover while fitting a new bulb and nissan uk parts dont seem to under stand slicktops .thanks taff:)

How easy is it to do this? Having spoken to Phil the zed is in worse shape now. The rear archs are gonners. So with that said I want to fit a wife arch kit. Is this easy enough to do? Will also be buying a front bumper (more than likely the scarab from zcentre), are these easy enough to put on?

http://cgi.ebay.co.uk/1990-NISSAN-RED_W0QQitemZ250266251524QQcmdZViewItem?hash=item250266251524&_trkparms=39%3A1%7C65%3A7&_trksid=p3286.c0.m14

Does anyone know if the boot blinds can be taken apart and bits changed over,got 2 bad ones but could make 1 good one if so:D cheers paul

I've De-spoilered the Z (the foam type on the S1) and need to fix the perspex strip onto the tailgate, so although it will be fixed to the back by the clips it will still rattle around so i need to know what the stuff is i need to "glue" the strip on? I'm sure it's a black substance that comes in a yellow tube but i could be wrong.

as above white z with kit and white rear lights incl center panel nice;)

going up sittingbourne road it had been a month since i'd driven the car and forgot where the stalk was to flash my lights so just made myself look a complete numpty by waving like mad.........lol :eek::eek: think the first three letters of reg was MDZ

Just put new discs on the rear of my zed, preperation for mot as the cars been of the road now for a while, anyway doing the discs themselves was straight forward enough, i have to install new pads aswell, never tried this before, read a few guides on the proceedure, is it really necessary to replace all the shims etc.... can i not just slide the new pads in??? and also noticed that the inboard pads have less wear on them than the wheel side, are the pistons seized???? Oh and another thing anyone got BMC cap floating around?? cheers all.

White uk spec going past aldershot town football club at about 8 ish last night anyone on here? I was in my black golf waiting to pull out of readan road.

Right. Seen one advertised. BUT, how the heck do I tell if it's genuine or a mock-up short of taking it apart? (Garage would not be a fan). read an archive file on here which seemed to suggest a few points but also said specs could vary so gauges/interior/stickers were not always reliable! :wack: however, it has engine-bay plaque, badges and bodykit & exhaust looks correct, wheels aren't, but IMHO how many Z's have original (even special edition) wheels???

due to a few personal problems at home i may be selling my pride and joy, its a TT import done 105000 miles and has just had the 120K kit provided by DTA and fitted by Andy duff, i was thinking of putting it for £2000 and see what i get knocked down to, just a thought at the moment but its more than likely gonna happen.:cry:

Just looking through ebay and found this! Going cheap for a 99 spec gearknob!! http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=150265030644&ssPageName=STRK:MESE:IT&ih=005

Does anyone know how I can remove the dark tint on my rear lights? They have a few coats of the spray tint and then laquer over them?

Does anyone know anyone in the Nottingham area who will pass my Z through an MOT with dark tinted rear lights and an "illegally spaced" number plate (although completely legible)? It is due soon and need to get it sorted if not. Thanks

New to zeds so be kind :) my car has mph clocks but the needle goes up far to quick so assuming its still kmph. What do i need to correct this? thanks

very odd....happened yesterday i looked out of the kitchen window and noticed the drivers side headlamp was on....when checking the dash etc everything was set to off....so fiddled with the indicator stalk and light switch and it went off....but came back 2 hours later.....did the same thing again it went off....any ideas what the hell that is all about?

http://www.alloywheelrepairs.net Reason I ask is that one of my front wheels has developed a slight flat spot on the inner part of the rim. Not noticable from the outside, but I am getting mild vibration around 70mph through the wheel and is difficult now to balance. Because my wheels are forged not the cheaper cast type, the flat spot can be rolled out quite successfully. The guy I spoke to here says it's an easy job on my rims, especially where the deformity is. Just wondering if anyone's used them? The guy that refurbished my rims doesn't have the facility to go into that detail with them unfortunately. So found these guys on the internet. Seem…

Where do I get metal ones? Does anyone know how much?

NA which I bounced over a curb about a month ago. Ever since the engine has had a vibration worst at about 2000 RPM. running on 6 pots and nothing seems to have come loose and engine revs very freely. any thoughts what it could be.