Everything posted by GSC
-
H3 Headlamp Bulb Removal
Hmmm.....I have removed the spring...bit nothing seems loose....how much slides out?....any pictures?
-
H3 Headlamp Bulb Removal
Help required please.....I have disconnected the wiring....removed the locking ring and rubber boot....how do I get the bulb out? Thanks Gary
-
Weird brake issue...
Russ...Probably unrelated...but recently I had a ‘similar’ issue where as you put the brakes on and off while moving slowly I got a thump through the pedal. I took the front wheels off to inspect…. as it felt to me as though either the pads, or the caliper itself was loose and moving as the pads grabbed the disc. Inspection revealed that all was as it should be...but the problem persisted and got more noticeable....so I took it to a mechanic friend of mine who observed/felt the issue braking on and off at 5-10 mph around the car park....eventually identifying the problem by lying on the ground as I drove the car towards him...braking on and off. The issue was down to two loose bolts securing the offside front lower control arm. Bolts tightened….thump/grab gone!
-
South East London Meet & Family Fun Day - 19th May 2018
BUMP A little reminder....this Saturday people....hope to see many of you there...14:30 arrive Thanks Gary
-
What did you do to your zed today?
Subscription renewed. :yes::thumbup:
-
Twin Turbo Decal
Thanks all...Ash got me an OEM replacement and it is indeed part# 93094-40P02....I hadn't taken it out of the packaging...otherwise I would have seen the template !
-
Twin Turbo Decal
Thanks
-
Twin Turbo Decal
Could some one please advise of the exact position of the Twin Turbo decal on the rear hatch...or is it just a case of 'centreing' it within the right hand side of the hatch? Thanks Gary
-
South East London Meet & Family Fun Day - 19th May 2018
14:30 - 15:00 ....the event starts at 15:00...so should give enough time to park up in the show area
-
Bonnet Insulation
Is it possible to remove the bonnet insulation clips without breaking them? :cursing:
-
finally picked up my Z on sunday
Tom...There is a meet coming up soon....not too far from you...and for a good cause...should be a few club members there for you to faces to names :thumbup1: https://www.300zx.co.uk/forums/showthread.php?188795-South-East-London-Meet-amp-Family-Fun-Day-19th-May-2018
-
Stats for each month
Gary...This may have been asked before...so apologies if that is the case..... The monthly stats are a great indicator of membership activity....could you also show the total number Subscribed and Registered members at the end of the month in question? I don't mean historically....just going forward :detective:
-
Car covers
I have a fleece lined all weather cover....... https://www.300zx.co.uk/forums/showthread.php?168270-What-did-you-do-to-your-zed-today&p=1943266#post1943266 just noticed that the ebay link doesn't work....will try to find the supplier website details...... Scrub that...looks like the company I got mine from no longer exist ! :confused1:
-
South East London Meet & Family Fun Day - 19th May 2018
BUMP Just to keep it on people's radar....I would like to get 10 or so cars there to represent the club...there are a few South East 'regulars' conspicuous by their absence from the list....JoleyP...I think your family would enjoy the day...Alic, AndrewG...Art.. :whistling:
-
What did you do to your zed today?
Belated post....Collected my Zed from Jimmer on Saturday after a 'Full Monty' cam belt change...plus engine fluids and filters service :thumbup1: Great drive home after...... with the V6 as smooth as a sewing machine. Many thanks to Jimmer and Donna for their help and hospitality :clap:
-
Masters Golf Augusta - Need Help !!
Nice one Andy :clap:.....I had Rickie Fowler e/w....I was willing Reed to miss that last putt ! :mad:
-
Oil Pressure Sender
Does anyone know the part number for the Oil Pressure Sender for 1991 TT Manual? Thanks
-
New Daily Driver ....Too
RX 450h F-Sport £140 VED....and an alleged 40+ mpg (although I haven't seen anything like that....but you are probably not meant to put it in Sport mode all the time!)
-
New Daily Driver ....Too
I have been aware recently that my ‘Green’ credentials were not particularly good :thumbdown: What with my daily driver being an ageing, polluting, £560 per year VED..…(but all together magnificent) Range Rover Sport ….coupled with my 300bhp 3.0 V6 Twin Turbo weekend car….my carbon foot print left a lot to be desired So after 4 years of ownership… (the longest that I’ve ever kept a car!)….I bit bullet and sold the RRS to buy a more environmentally friendly daily driver :thumbup1: So now I am the proud owner of a much more climate change friendly 3.5 V6 300bhp every day vehicle :smartass:
-
Ace Cafe 24th March
I'll be coming .....so Russ.....if you have had a chance to look through your 'stash' to find the brake light blanking plate....... :whistling::wink::thumbup1: Thanks Gary
-
Series 1 Spoiler - Centre Brake Light Blank
Russ...The German parts supplier failed miserably :thumbdown:.....so if you could have another look...it would be much appreciated! :thumbup: Thanks Gary
-
Series 1 Spoiler - Centre Brake Light Blank
A German company ....Website: http://www.carparts-pros.com
-
Series 1 Spoiler - Centre Brake Light Blank
I ordered Part # 2659637P15....Eur 3.90....17.90 shipping and 3.00 Paypal fee.....very suspicious of something from Nissan being only Eur 3.90.....I think I paid 3 times that for the window stop cap!
-
Series 1 Spoiler - Centre Brake Light Blank
Thanks Russ... Nissan UK say it’s NLA... but think I have found one in Europe... was very cheap (before shipping) so not sure it’ll actually be the right part...let’s see what turns up !.... I may still need you to search!
-
Lakes Weekend @ Fat Lamb Inn - May 26th to 28th 2018
8:00 works for us .... Thanks