taff

http://www.courtesyparts.com/z32/index.html

No they are definatly bigger than stock zed calipers .r33 gts/t use the same as well .

Has anybody got them fitted and is there any diffrence over the stock system. ;)

This seems a fairly common upgrade on s13/s14 now and they are getting cheap £150 for calipers and discs .They are bigger nissan alloy calipers than the zed and bigger discs nearly 300mm staight bolt on fittment.and they take a standard s14/300zx pad as well.

How have you dissabled it because with a hicas lock bar all it does is replace the rear rack you still need to re fit the rear hicas arms .And if there is play in the inner joints or the outer hub joint you will still get movement at the rear.

Can this double din console not be brought from nissan parts dept then.

Nissan glued /locktite them on in the factory when new .

Just looking throught the rides section and found this seem like a good engine spec dont know if its still about or not. Pauls300zx slicktop Trust TD05H-16G turbos Trust SUS Manifolds Trust Wastegates Full Tomie Engine Inc Tomie 90mm Pistons Tomie Rods Tomie 266 in 268 ex cams Tomie Adjustable Pullies 550cc Sard Injectors Extra Bosch Fuel Pump Twin Fuel Lines & Feeds/filters etc Sard Induction OS Giken Triple Plate Clutch OS Giken Gear Set Gear Box Ohlins Coilovers Alcon 4 Pot Monobloc Brakes Recaro Seats 17" Panasport Split Rims

http://www.aus300zx.com/forum/showthread.php?t=271413

Before ive put a socket over the new stud then put a wheel nut on a tighten it to pull the new stud through.

Yes 14.3 same a 200sx 14 fronts ,the old ones maybe a bit smaller as they have been taken out .The hubs arnt acually splined from new they just get pulled threw and cut there own splines.

Front stud size = 12mm x1.25 thread with a 14.3mm diameter spline Rear stud size = 12mm x1.25 thread with a 12.9mm diameter spline

When you say you dont need any can you remove the standard ones as well.

450 + Bhp ;)

I may be offered an exeddy clutch from a s14 200 sx i just wondered if it will fit a zed 32 tt thanks taff.

Hi is any body using a 40 rear and a 45 front profile tyres on a 18" rim .I know people normaly fit 35 and 40 but i want to give the car a bit more ground clearance without adjusting the coilovers .I was thinking a 235x45x18 front on a 9"rim and a 255x40x18 on the rear on a 9 " rim .thanks taff.

The whiteline poly subframe locking rings are good and there not harsh like some of the other ones .One of my mates is selling a set of new ones if your intrested.

Do you think that an hks or apexi filter would fit in above that front mount or do you have to use the twin filters in the kit.

Try these guys http://www.envyperformance.com/index.cfm?fuseaction=category.display&category_id=95

Super mega phone exhaust is made by APEXI.

Newera imports part might be able to get abflug stuff even secondhand they can source many rare japenese made parts.

Is that cusco one for a swb.

Thanks guys :bow: ill give it a go on the weekend if it ever stops raining.

Thanks are they easy to get to change etc thanks.

Ive got a manual box on my zed and just lately once in gear the gear lever moves side to side just like neutral all gears do this.But there is no wobble of the stick when driving just loose side to side ,any help please thanks taff.