boldy

Yes bud but like any type of filler it has it,s limit of flex but it,s specially formulated to bond to plastic as long as it prepared right but it,s not as easy as normal filler to rub down .HTH

Lol , My mother has one of the number 2 gadgets made out of wood , bought in America in about 1970 and it,s called The Do Nothing Machine !! :yes::yes:

There are special fillers for flexible plastics , ones made by UPOL and it,s called PLAST X , it,s a black flexible filler. Just found this http://cgi.ebay.co.uk/Upol-PLASTX-6-Fine-Flexible-Filler-Plastic-600ml-/310206207836?pt=UK_Body_Shop_Supplies_Paint&hash=item4839bb175c Plastic Padding also make a similar filler. The paint normally has a plastisicer addative to make it flexible .HTH

I fitted some of these a few years ago bud , they,re very good . http://www.300zx.co.uk/forums/showthread.php?t=82413

Mines been off the road for about 8 months now and it,s bloody killing me :crying::crying::crying:

Just remove it bud , it doesn,t seem to do anything for the running , i think it was more for emissions , took mine of years ago i just blanked the plenum and the pipe to the manifold . HTH

Mantav8 and myself are having a run down :yes:

I,ve got some Sketchers , really comfy and very good quality :yes::yes:

Welcome bud :thumbup1:

I,ve recently put this up bud , might help in some way .:wink: http://www.300zx.co.uk/forums/showthread.php?t=145589

Warm the black mastic with a heat gun or similer , makes removing lights etc much easier . HTH

Or a Stagea as a GTR ! Actually i quite liked this :oops::oops:

I followed this guide if this is what you had in mind http://www.twinturbo.net/nissan/300zx/forums/technical/view/1019112/The-ultimate-PCV-reroute-write-up.html I used 15mm core plugs to seal the original rocker cover outlets and a mate made me a couple of joiners to connect the new breather pipes to the PCV valves. The same mate drilled and tapped the rocker covers . HTH

If it,s a turbo it could be a leak on the turbo cooling pipe , one of mine sprung a leak , it didn,t leak when running , it was shortly after switching the engine off steam would start rising from near the battery . Just bear in mind there are loads of little water pipes in , under and around the plenum which can spring leaks , the best way to stop those leaking is to do a plenum bypass and eliminate them alltogether . HTH

The blue one in the first pic is a Opel Kadett Coupe , i nearly bought one of them as my first car !! Nice models BTW

Tis looking mighty fine bud :clap::clap::clap:

I was 43 when i bought my Xbox and i love it , get a bit pi55ed off when ya get ya ass kicked by a 6 year old on Black Ops though !!! lol I put it down to hand to eye coordination , mine,s fooked off somewhere :blushing:

I forgot about Shinedown , went to Rock City here in notts , brilliant voice, check this out took in someones front room !

I,ve done a complete reversal bud , it was silver with blue engine detailing now i,m going for Skoda Race Blue with silver engine detailing , i like to be awkward ! lol Now i,ve seen the front de-swaged i,m gonna go that route and do front and rear :wink:

The high beam bulb is a H1 but it,s in a seperate holder that clips into the light , most use hid for the low beam as high beam is usually very good .

Nickelback at Sheffield Arena were brilliant , seen Thunder a good few times and they were always superb live , Danny Bowes is one of the best lead singers you,ll ever hear and Whitesnake , a legend , nuff said . For anyone not familier with Thunder , this was at Donnington

The eyebrows have gone bud and i,m reverting back to a standard rear end :yes::yes:

Ooh i do like that , cheers bud .:thumbup::thumbup:

I take your all not sure yourselves ! lol Thanks for the input , might have to get the filler out again then :thumbup::thumbup:

That,s gonna be a beast !!!