bigh

All OEM, great service as well. £75-80 the lot from the US, will post up ebay link later, when at home. Linky here http://cgi.ebay.com/ebaymotors/90-96-NISSAN-300ZX-COIL-PACK-INJECTOR-CONNECTOR-12-PACK-_W0QQcmdZViewItemQQhashZitem53e4a2c12aQQitemZ360318157098QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories Stickers I made, to make sure everything goes smoothly. :thumbup:

ditto ^^^^^^^^

Excellent cause Andy. Its very easy to be tested for this, I would recommend getting it done just as a precaution, especailly the :wheelchair: "older" generation.

Postie delivered this little lot this morning from the US. . Swapping the old ones with these whilst doing the plenum change. Should make re-routing and tidying the wires easier, given this will increase the overal length of the wires

Right, has anyone ever removed the spindle that runs through the front throttle housing? I am guessing that those 3 indents on the edge of the casting are perhaps holding the main bush/insert in place? Is it a case of just grinding off the tab on the indent and then pressing out the bush? :hammer: I need to get this out as the being steel it will not go through the Anodisng process. cheers

Nice w/a, love the colour as well

Would be interested to know what realistically is possible on the standard internals as well. Is 450 achievable if you have all the right mods, ie, Larger IC's, Injectors, EBC, tubs, filter, exhaust & de-cat ???

yes I remember that, think it was on one of my threads aswell :headvswal

Having replaced my IC's for larger ones I'm having trouble tracking down a smaller water bottle that has 2 outlets, front & rear. Scoured google et al and can only find either custom bottles with 1 outlet or pumps with 2 outlets. Anyone know of a supplier?

Looking forward to seeing it. It 's been a long time coming but surely it will be one of the best Zeds out there!

Haven't done this myself, but it looks like that you need to squeeze the two tabs on the sides of the fitting, hth

Fantastic looking place Paul. Me and the missus are flying off to Sri Lanka on the 4th December and stopping off at Meeru Island on the way back http://www.meeru.com/Default.aspx for the last 6 nights. In a dilema at the moment as we have booked to take the speed boat from the mainland to the Island but fancy the Seaplane just to get the fantastic view as we come across to land at the island. Can't wait :):)

I'm sure Andy Ish would be able to help yo out on that one, as he has just recently done that on his car. Maybe try giving him a PM?

Watching this thread with interest as I am going to be doing my soon. (Well as soon as I get the spare plenum finished.) Incase anyone else is thinking of doing a plenum pull there is some good info here taking you right through the whole procedure. http://www.fairladyz32.com/downloads/images/manuals/plenumpull.pdf HTH

Vods you have PM

awesome, thanks for uploading and sharing your project :clap: :clap:

Thanks for the replies guys :rockon:

Guys looking at replacing my standard d/pipies for some nice divorced s/steel ones. After looking at it from below, looks like (f***all access this way)and talking to Andy (Ish) I have been told that it is doable from attacking it from above and the underside. Has anyone done this with the engine in place? if so apart from growing arms like MR Tickle, could anyone give any usefull pointers. If it helps I will be removing the plenum later on so that should be easier right? :hammer: thanks H

Yes I have an EBC, that must be it, cheers matey!

Couldn't really pull the plugsup any further because of the short wire length, as it was I had to fish one side out with my 12" long nose pliers. Only found them as I was tracing back a vac hose from the CC hard tree at the front of the car to the back of the balance bar.

Just found this plug down the passenger side of the plenum, just below the dipstick. Car was running fine before I put her up on the axle stands to swap the IC's, and I've only removed the CC and haven't (KNOWINGLY) disconnected anything else. So I am assuming that this is some redundant system. Probably nothing to worry about......I hope. cheers, H

None at all...:lol:

cheers Tudor, will have a look through their website. Looks promising!

pic's plse,....doing mine soon.

Would have this off you but, sadly limited room in the garage means I haven't the space for a compressor. :thumbdown: