Terry

Hi mate b4 you buy a starter make sure teeth on flywheel are not worn, mine use to click and whizz away sometimes, and it was the edge of the teeth on the flywheel.

only put ebay on few hours ago lol. atleast people can see it.

Some days i like them and some i dont, think it s differant angles if you look at them from the side the round bits the actual lights look like they stick out a little. i use to like them a lot. but really like i think its 99spec rear lights and spoiler now.

Had to buy another car for parts so got bits on thier. so used my pics

Managed to do it but thank you anyhow much appreciated.

And it worked, Thank you vodkashots, and yeah its allways nicking me money bloody thing. Car drives me nuts but maybe thats why i love it. Had a uk car which got little bit scabby so found a jap spec shell with no rust at all in grey, stripped it and sprayed it white with brother in law and built it back up with all the the uk parts even the seat belts uk are now. exept the front and back bumper prefered jap spec. All i need now is some wheels and i dont know about the boot sometimes i like it and some times i want standard lights and a spoiler cant make my mind up, Every1 asks is it an american car cause of the rear end. What do you guys think.

I have a go now thanks i hate computers lol. it sounds hard just hope it aint

Be paying soon aint had car on the road, and its used all me money lol. so wait to subscribe aint got a clue about photobucket thank you.

Thank you, Have a go now really crap with computers, thanks again

hi all, as above wanted to show me car off see what people think, i had the back smoothed and had it painted artic white a little while back but engine went and only just fixed it so wanna show it off a bit why im happy with it before it makes me mad and something happens again. thank you.

It may have been o2 and coil pack, know couple of them were similliar. If you numbered them should b all good.. These cars are never straight forward i only puy my engine in couple weeks ago, The cambelt went on my old engine the little pulley between all the cams pulled the thread out from where its bolted. The new engine had what looked like a new waterpump on it which collapsed within 2days. So i put another used pump from my old engine and a couple days later its gone again. the viscous dont seem right compared to my old one, seems to have movement which i think is knocking the pumps out. thought i may b tightening the belt up to tight so 2nd pump left it more loose and gone again, Bet when u find it its something silly, giving you loads of problems. But your forgive it for all the trouble it causes soon as u drive it again. I allways do lol. goodluck.

Have you tried a boost leak check. Also have you checked all the plugs on the right hand side around balance bar. Air regulator and injector plug are really simillar. and think the knock sensor and 02 are too.

my pipes were ok just wasnt on properly right down at the front. When they dont rev past 3000rpm normally maf, was thinking if you had air leak bad enough may not pull the air past the maf give you similar problem, nightmare cars lol.

hi mate when i changed my engine it had what seemed like a misfire played with everything ended up being one of the lower turbo pipes the big one that goes right to the front thats a bit of a pig to get on lol. Hopeu sort get it sorted.

rigs have you a number to reach you on please.

thats the thing with zeds and most cars my car as had the gearbox off a few times and can change a clutch in few hours. my cousin bought a zed and clutch went so i said to him to bring it round will do it. all the bolts holding exhaust on just wanted to snap everything was a nightmare. its all ok to do bits until things wont undo and its so easy the 2nd time round lol.

i have done passanger side on axle stands at home, it aint that bad undo the 4 bolts that let 1end of the turbo swivel knock turbo round a little then you will be able to get to the1 manifold bolt i couldnt get too,then turbo will come off with the manifold. done drivers side on a ramp if you remove master cylinder and bar coming from steering wheel to rack gives you some room, both with engine in the car, the workshop manual im sure says to do them with engine in the car too. their fiddly but can b done, goodluck.

hello every1, have an 1989 300zx japspec tt manual, wanted to know roughly what is it worth, bought uk car had it resprayed and it went little scabby again, so got a jap spec shell what had no rust sill work anything at all. put all the parts on it and i mean everything, another engine wires every bloody nut and bolt. just got it resprayed in merc artic white with black roof. arches were shoots or whatever they call it looks like new now gutted to sell it. only jus picked it up and split up with misses lost my job as i had2 move back to kent so need to sell car. needs 2 rear outer hicas bushes and new window trims to finish it off. as standard wheels standard everything apart from lambo back lights,profec boost controller and blitz dump valves and exhausts. have uprated stage 2 turbos,intercoolers ecu but took them off so would come wiv it. had 555 injectors but 4got to take off old engine and scrapped wiv everything on my mind. fitted it all back 2standard when put engine back in leather seats good condition other then driver seat as small tear where u sit. seat belts in uk position now as used parts from uk car to build shell up, jap spec bumpers front and rear, thank u 4 reading what would any1 guess it would b worth thank u again.

i had bridgestone potenza run flats, standard suspension and was a horrible harsh ride, dont know if it was them or not but sure it didnt help towards it, my rear shocks the tops come off and and blew all the fluid out, shortly after getting tyres lol,

cheers mate

oh i hope not lol, was that the black trim, or the white/see through trim underneath, cause its the white/see through one i mainly need as it looks like it as to go in with the screen the black ones i can change later on, thanks for replies,

taking window screen out as needs replacing and having car resprayed, problem is theirs plastic strips in the bond that holds screen in, not the strips that follow up to the t'bar strips beneath these, and the strip that goes across the top of screen, are these something window companys can supply or are they something i have to special order. any help appreciated thank you, also if anyone as the strips that run ever side of screen they would like to sell would be greatful, the ones that follow t'bar strips,

thanks guys, i like lambo lights makes it look better lol

Hello every1, my car is being painted and i asked them to lose the bubbly rear spoiler, now im left with a bit missing, problem is dont want the black strip as i have lambo style rear lights fitted and want it all white and smoothed in, seen a couple of zx where they have smoothed it in, and i quite like the look, how is this done do you weld a plate in as if it was all filler would it crack or sink a bit, any help appreciated, thank you,