SRRAE

3rd gear is best on a manual. It feels like it will never end. You can go from 20mph to over 100mph and it keep pulling and pulling :D

Right click save as on it, try that

I know, the can do you for 31 in a 30 zone, but speedos are not that accurate and even the slightest thing like how much tread you have on your tyres will make a difference.

Its up to the insurance company whether they charge extra for any points. I would have challenged the speeding ticket. THe recomended amount to catch speeding is 10% + 2mph. So the government recomends 35 in a 30 zone not 34, that had a very good chance of getting quashed in a court.

The tyres are narrower at the front for a reason, having 245 on the rear will cause you to tram line. I think you will find the wheel will catch on some part of the suspention if you put a set of stock rears on the front. I havent tried it myself but I remember some one posting a few years ago his front wheels making a nasty noise when driving just after getting his tyres changed. He found that the put the rears on the front and it was catching on something. And if Im not mistaken, putting rears on the front will not make them stick out an inch more it will make then stick in an inch more so they will look the same, they will catch and you will tram line so I cant see any advantage.

Hehehehe. My vid has got a round ;) I have noticed it posted on TT.net quite a few times and on 300zxclub.com

They are not bullet holes, they are speed holes :D

$300 I think

But look at how fast the cars are going past in the opposite direction. Thats not a combined speed of over 260mph or some thing. When the needle is says its goin 200bhp, look how long it takes to go past the junction in the middle of the road. It doesnt whizz past its quite slow. Dont look at the speedo, cover it up and look at the road it doenst look fast at all, 100-130mph maybe 240+ never

I notice a few comments about your laugh on there too Pete ;)

Havent you got to run in your engine first?

Lamborghini Countash are not as fast as you think. They where very fast in the early 80s but nothing special against a 90s super car. I think the 0-60 was 5.2 and top speed of 170mph. Still have on though, so I can say to people, I have a Lamborghini

Errr, you have to take off the lowerintake to get the det sensor if I remember rightly. And I remember having to take a pully off the lower intake to take it off. THis means virtually taking the cam belt off.

I was driving down the motorway to day about 75 and it was virtually empty. All of a sudden the car in front of my slammed on the brakes and the car in the middle lane did too. I had to slow down sharply too all becuase there was a police car parked on the bridge. How is that enforcing motorway safety? Their presense nearly caused an accident.

I cant remember the exact engine size, I was about 12 at the time and holding on for dear life

Exactly. Look at when the bike was going 180mph and look at how fast the lines where going past, hardly blured are they?

Look at this vid http://www.300zx-mods.co.uk/vids/Bye%20bye%20S13.MPG How quick does his car get to 180mph? It must be MPH cos his speedo says MPH on it. ;)

I have been on the back of a X-up 1100 doing 165mph and the view of everything going past is a complete blur much more than that, which is a vid camera view and thus the blur should be even worse but its not

To be honest that speedo looks more like KPH not MPH/

Thats what I said !

If I remember correctly the bike is a turboed hybusa, something like 200bhp on a bike which weighs probably 1/4 of a tonne. So thats about 800bhp per tonne and could easily do that speed. My dad has a Kawasaki 750 and the 0-60 was 3.6seconds, totally standard. Now imagine a bike which doesnt weigh too much more, nearly twice the engine size and turboed. No problem doing that speed.

do it does need work to make them fit.

Must be someother ones that. I head the you need a little modification to make it fit.

I have a lot of things to put on too. ;) Like valves in heads, not looking forward to that.

Doesnt the plenum have to be machined to make them fit ?