ttop

if you trace two wires back from the ignition (i think mine where orange and brown but carn't remember) there should be a small connector near the black plastic heater duct to the doors (near your feet) unplug it! and this will disable the soloniod. jim;)

it depends on how my volts the unit draws as to which piece of equipment your putting it on in the car ie, whats the fuse maximum load, if it excedes this use a relay to be safe. jim;)

it does sound as though your alarms playing up, what alarm is it? I know some good websites for a number of alarms wiring/installing/operating. jim.;)

arthur, I pay 32 pound for full syth 15/50 mobil 1. jim.;)

have you tryed unplugging it first, I had to do this to enable turbo timer run on, so you can remove the key with car running. jim.:)

looks good mate, ive got that look also, a bit difficult to keep clean at this time of year. I always find that the road tar of the tires always sicks itself to the cans. jim:)

I would use a relay as nightbreeder suggested (if for neons)?? jim

a stickey lifter is another name for a theiving twat is'nt it? usually you can hear one lifter that taps away like i little hammer on tick over, sometimes curred running some engine flush through, then change the oil. cheers jim.

I used to use castrol 10/60 for a while and then changed to mobil full/syth 15/50. seems to be just as good. jim.

on most alarms there are different setting for the installer to program in for the internal lights, they have timed outputs for cars with comfort lighting and duration timers? It seems strange that you have to drive round for a minute or two to turn them of? the doors are on the same circuit as the boot and don't reqiure an additional wire from the alarm. your bonnet sensor is seperate, do your lights come on when the bonnet is open? hope this helps a little mate Jim.:)

i has been this year and will be next year, jan-zed feb-zed mar-misses birthday apr-zed may-zed jun-eating jul-zed aug-holiday sep-sleeping oct-zed nov-christmas prezzies/zed dec-boozing...................................................../zed good year so far. ;)

how does everyone get a picture on with their signature? I have'nt put my pictures in ''my rides'' section yet, but planning to do this at the end of the week, does this have to be done first? cheers Jim.

hi mate, your zed has rear wheel steer, try having a close look at all the rear steer lines they go to the steering rack. is their any pools of fluid on the floor in a morning at the back? Jim :)

hi paul, is'nt this for the propshaft seal? mine the drivesaft o/s seal. jim.:)

hi zed heads, my rear diff is leaking fluid, ive bought the seal (o/s) from nissan (£8) how easy is it to do, ive looked on the online manual and in past threds but nothing really tells me that its on a spline and you can just pull the driveshaft out and then tap the new seal back in? has anyone done one before or know what it envolves? many thanks Jim.:)

6x9s are the way to go mate linked up to a amp! there not to difficult to fit, you have to remove the door card and take out the standard speaker bracket, theres loadsa room then! they just fit in the door card so make sure you gat them central... jim;)

no mate i just cleaned the gasket and put it back on as normal. the gasket should all be in tact when you remove the sump, can be a little tricky to manouver the sump round the auto box cooling lines when you lift it off, mine was! then you can remove the fluid filter and back flush it with clean fluid, you will see small particles of metal in the filter, this is normal and your filter is doing its job! cheers jim.

i did mine 2 weeks ago and it was that rubbery cardboard gasket, took the pan off cleaned everything then put it back hand tight with a 1/4 inch drive ratchet and everything is still dry under there! be very careful that you have'nt got very strong hands though they will strip real easy....... cheers jim.

i know what you mean mate and i agree with you. i bought mine for 5600 and ive spent about 4000 on mods and 1000 on doing those bits that didnt really need doing but i wanted to do them so i knew there going to be ok. jim.:)

also mate i think (but not certain) that they run 9 psi normal! jim.

nice one mate, sounds nice, its also good to hear that it pulls better than a supra. did consider getting a supra before the zed but im glad i went for the zed, wound'nt swap it for anything now! and i have developed a bad habbit of over taking everything? see ya mate Jim.;)

cheers mickey im going to carry on fitting them at weekend, how can you tell weather their knackerd or not, is it when you get that goose honk noise? Jim.

are all imports from japan TT? JIM.

ive read loads of posts now and a lot clearer than earlier today but can someone just clarifiy the whole process thanks you everyone Jim:confused:

ive decided to give myself a small christmas prezzie and subscribe at long last, i signed up on here in feb this year and thought it was about time i paid you good people for all that help youve give me over the year. merry christmas! Jim.