olliezx

a 501 wedge type bulb will do the trick ;)

Hello everyone who sent messages and couldnt get through. Sorry, been away around Europe for ages now. Im back and my inbox is cleared if you need to contact me, sorry havent been able to get to the internet for a while! Also, I start designing for Toyota in Brussels at the start of September, so if anyone was wanting a bit of LED work done, nows the time and ill see if I can fit it in.

Hi guys, sorry been on holiday! Feel free to give me a ring anytime if you want to chat about it. Its quite easy to do by extending the legs and running a little right angle loop. Just make sure to heatshrink the open metal.

what rpm? it could be the maf.

just do them, they are about a fiver each and take 30mins each at a slow pace. :) its not worth not doing them. IMO do all the hoeses too, total is about £50 and will take a fair couple of hours, but none of it is tricky, everything is accessable.

its like a crisp packet is stuck to the wheel? I get that.

I did a Rocky-athon (1-5) at uni. But the beer helped. Contemplating some 24-hour '24'...! :eek:

Get a PC! :slap:

decat it! dont be scared! :D :x:

Yes those, and the front pipes they are attached to (the top part in your pic) will fit lwb and swb.

Engine -> Manifold -> Turbo -> Downpipes(may have pre-cats inside)(may also be divorced) -> Cats/Decats

only bit that fits are the cats. :)

you lot need to see: http://www.flickr.com/photos/binkysgirls/451791545/in/set-72157600057817804/ you might have to register with yahoo, but trust me its worth it. (Its not porn, just exceptional photos that make you want to be 20something!)

Gutted for you completely! :( But that might just be repairable, fingers crossed.

Its pretty easy. The hard part is removing the glove box and all the interior air stuff to get on the two bolts that hold the cover over the firewall hole. Getting on these two nuts is a bitch!.

I'd drive it, the styling is so old, you'd have to be pretty up on your cars to tell what the hell it is or was supposed to be.

so true!

gorgeous wheels!

:D ooooh yeah!

You can see the location of the connector in my diagram below: (in the centre)

i just put in a discrete ally push switch.

We'll put Conzult on it when you come up, see if anything shows up.

Crack welding about £50. The curbing is a different question, depending on the finish of the wheel, as it will need to be re-finished the same way over the whole wheel. Probably £150 for both inc. delivery.

Yes! I use Megs Endurance Gel on my tyres and that Autoglym on my engine, try it, it really is great stuff.

Ive been in contact with these guys for a while now, and I have a big envelope of all their leather samples. They said in one of their emails, when I asked, that they will consider group buys. :)