General Discussions - 300ZX Related

Hi, Thinking of going for some Meister coilovers for my SWB. Seen lots of people on here say they are very good over worn out originals. Mines not doen any miles so wondering if ill see much difference over stock?? Whats best version S or Version R??? Anybody tried both or got any feedback? somewhere it was said about steering vibration in the pillow ball mounts from Version R's is this right??? Cheers

One for the Zed and GTR owners Just wondering: If you attempted to fit an R33 GTR 'pull type' multi plate clutch (mated to a Z32 8 hole flywheel) to a Z32 TT would this work or is the Z32 a 'push type' clutch or has a different sized clutch cover? cheers

Anybody going this weekend? Last weekend was great, olny about 10 cars running :w00t: I'm determined to break into the 12s, shame my new wheels aren't here yet :(

dropped a clanger with my build. i've got ttautojdm. bought manual na jdm. dismantled na for donor for the tt.got everything for the conversion and hicas delete etc...... but like a proper drongo forgot the pas pot with the main pump hose! managed to modify (or bodge) the pas pump elbow from the tt and all is well. just got to bleed her all up change all vital fluids etc...only things left to do are the interior and paint! cheers dave that alloy pulley is bang on!

Does anybody in the Teesside area have any logs, pallets etc they want rid off. Running really low on firewood and would be more than happy to remove them for you.....

My stereo sounds a bit tinny and rubbish. The head unit is ok - it's a Sony one a few years old but I still think that's not the problem as it was 200 odd quid when it was new. The speakers are originals in the front and some very nasty cheap ones in the back which I put in when one of the original rear ones stoped working. If I was going to replace the speakers, are the front ones easy to get to? I remember the back ones were easy, just pry the cover off. Any recommendations for speakers? JBL 6x4 seem to be popular from a search for the rears. I don't know anything about speakers and stereos but I'd like it to sound better. I don't want bigger speaker…

car has been standing for 6mths and went to try to start it and it turns over and runs then cuts out has new fuel quarter of a tank any help is aprecIATED

Got a oil temp gauge in my car and nearly all wired up except for the sensor unit itself. There appears to be a blanked off port next to the oil filter that would be ideal however it doesn't screw directly in. Who knows what size adapter I need? An ebay link to the required adapter would really help!

For some reason my clutch fluid ran low i think it sucked in air i cant seem to find a leak pulled back boot on slave and its dry .Booster ontop of pedal dry as well as master cylinder now cant get a pedal tried bleeding loads of times at slave and remote bleed under bonnet given up for today anybody else had this thanks taff.

Had my slicktop 6 years now was just wondering how many are on here ,there wasnt many when i first come on here but more seem to be appearing . mine 1991 tt manual pearl yellow eh7 slicktop

Does TT and N/A proshaft is the same? If i got na subframe and diff can i connect TT proshaft?

Hey all, New pictures added to the end......take a look!!! As promised then please find attached for your viewing pleasure (or displeasure.....:D....) I will start with the most relevant and then just drop the rest in in whatever order they land. Opinions are welcomed as sticks and stones may break my bones but names will never hurt me :p UNMISTAKEBLY A Z32 N/A 2+2 ONLY PICTURE I HAVE OF IT SORRY :S Enkei racing s alloys 17" split rims (not pictured of course) Upgraded all speakers within standard housings (so as not to ruin original interior appearance) It does have the blue light dash mod which i kinda like :) I believe that …

what is the name for the colour of the vinyl in the car as its not black but looks all most like a brown type does any one know where to get the same from ?

I dont think the 350z lads will like this

Following on from my previous post i have done a compression test this morning and pleased to say all 6 are at 170 or a couple either side but non of them are down on compression. However i still have the poor starting problem and all 6 plugs are black surgesting over fueling. Anyone point me in the right direction on what could be causing my poor starting? No boost leaks new engine wiring loom all injectors tested and all have 12 ohm resistance new injector seals please help its doning my head in!

I'm getting a noise. Kind of an exhaust heat shield rattle but a much lower tone and nearer the front. It happens at low revs briefly when there is pressure on the engine (i.e. pulling away). Had it in the garage but can't make it make the noise at standstill so my mechanic can't find it. It's certainly not a heat shield on the exhaust as I have a full mongoose system now with decats and it's still doing it. Been like this since I got the car about 10 months ago and I've finally had enough. Any ideas..??

Just purchased a NA 300ZX import 1994. Want to get the cam belt changed. Live near Welshpool in Mid Wales. Any one recommend a garage/workshop that is reliable in this area. If not who,s the best in UK?

Just wondering if anyone drifted their 300? It's not something I've been able to find much evidence of so just wondering if I'm looking in the wrong place or if there is a reason why people don't...? My 350z drifts lovely but is worth too much to me to be driven in that manner too often....... My 300 is also of value to me but isn't worth as much (just before anyone gets offended) :hang: I get that an N/A 300 has an open diff but is there some other reason that people don't seem to drift these cars? To me it seems an ideal candidate for the task really??? What do you guys think? :)

Tonight at 8 o'clock national geographic channel 2 junker 240z s being transformed into fully customized rides

does anyone on here take there zed to the wyke down car show in andover on easter monday

Where i can buy tt exhaust manifold. I need to get by sunday. Is where any shop? How much will coat at the nissan dealer?

I did post something on this last year but it's now worse than ever...OK...here goes... At ANY speed from 50mph upwards my steering sometimes shakes quite severely. The challenge is that is doesn't do it all the time. Sometimes I can cruise at 70 and it's completely shake free and then some other times I can be cruising at 70 and the steering wheel is shaking very severely! I have tried to look for speed trends, road type trends, car hot trends, car cold trends and I can't find anything that triggers it! Some journeys will be as smooth as you like and on other journeys I arrive at my destination feeling like I have Parkinsons disease. To give you the full p…

where's the best place for the three cam belt pulleys as i need some urgent please? is it best to go nissan or other?

***EDIT: I've just checked on an old thread and this wing is ORIGIN not URAS! Crap pic but just wanted to say that this wing is stunning I'll get some proper pics up of the whole build in the not too distant future

Well I what you to show guys what I did and what progress I am doing. first of all I had uk model 300zx TT manual. But I had a accident by some idiot skyline driver who hits push me to the kerb and street lamp and he runs off. body was badly damaged one of pe1420 turbo was damaged as well. this is the photo after the crash. So after that all problems I decide not to give up and fro the car to the scrap yard. I both another N/A import zed. conversions modifications: engine clutch interior exterior ecu loom pipes done more steering angle well I mean everything lol All mods car will have po…