General Discussions - 300ZX Related

Nice black z on A13 mcdonalds near corringham... Just noticed it used to belong to speedy S and was up for sale on here some time ago.... Any idea who has it now in the Essex area????

It's not often I ask for peoples opinions, I generally tend to go my own way with cars and sod what people think. I want to make sure I get this one right though. I've never liked the alloys that the car came with. The offsets are crap, and have spacers fitted. But with all the rest of the money I am throwing at the car over the next few months I can't afford a full set of alloys and tyres. So plan is to do a DIY refurb. I've done this before, so not phased by it. I'll be keeping the polished rim, but what are folks thinking about the centre spokes? Doing them silver just doesn't seem right, as it's too....dull. I've considered BMW Sepang …

Hi all! Just a quickie to let anyone interested know that I have discovered the whereabouts of a GRP boot lid with the set back window, I don't want it as I don't like them personally but I will be going to see it tomorrow, if anyone is interested give me a shout. Will move to for sale section if I collect it.

In running like a bag of shite part one, a faulty injector and corroded connectors were the culprit and sorted... Well if having issues with the electrics isnt bad enough with this weather, with the headlight issue still not resolved, when driving today all was fine until after a filling up at Tesco my car started running rough and lots of smoke out the left bank exhaust, i have a straight through mongoose system so is it still likely the left bank of the engine? I know the intake works opposite sides. Checked all the connectors, gave them a wiggle, but nothing changed, im hoping i havent got another injector gone bad. Bad smell of fuel, which makes me think inj…

Hi guys!! long story short, my car broke down in london on sunday morning (bear in mind I am from birmingham) and a very very helpful chap driving a black 300zx. registration plate A16 RBO pulled over and gave up a good hour or so of his morning just to help me out. even went and fetched some parts he thought may help me on my way. basically I forgot to take his name, but wanted to track him down just to simply say thanks again for all his help. its rare you come across people like this nowadays. I decided that a forum like this would be my best bet!! If anyone knows this guy could you please please get him to contact me. thanks in advance!!

Hi Bit of a random question Does anyone think their Z is to loud? I have a pair of Mongoose back boxes that i think are to quiet if anyone fancies a swap :whistling: :whistling: :whistling: Cheers Rich

whats the best to use just a under seal or a stone chip or both I have not done undersealing before so please some one point me the rite way to go about this

Hi guys, Was bored at work so I thought I'd make a thread from start to finish of how I bought my zed shell from Sussex stu till now. I know I have a couple of threads with photos of respray and another with the build but thought I'd put all the pictures so to try and see how it came along... I still aint finished so I will just update it has I go along... This is how it looked when I 1st got it The engine bay I took it back to metal etch primed then seam sealer then 2k primer Then some 2k white

Well I've been zed less for not very long at all. I don't want to spend 3 or 4 grand on a running car because i enjoy my testicles where they are. Not hived where the sun doesn't shine by the Mrs if i were to spend that amount :lol: so I'm toying with the idea of buying one that needs some loving. Would need to be a TT and definitely a manual. needs to be sound body wise mechanically not too bothered how it is to be honest. I'll be keeping an eye out over the next few weeks/months so if you hear of anything then let me know :) it may be the right one for me :biggrin:

im going to have a go at programimg my ebc. tom and wanted to know what boost pressure it should be at safely as not to get anything to go bang. theres also i read a self learning program that reads whats its capable doing then you can set it after as well, what shall i start with.and if an ebc will not boost anyhigher than thats oem capable why is it that the car turns in to an animal when on if it cant boost anymore than its ment to, conffused and dumb?

Some of them say 52mm and some 56mm is there a big difference in cooling ?

has any one any idea where i can get a handbrake fitting kit tried jeff no luck

My turn to thank somebody again. A big thanks to Joely P, Joel saw that I was enquiring about a 3rd brake light which is for Jr's shorty. Joel contacted me and said he had one knocking around, and when I asked how much he wanted for it his reply was a big nothing. I received the brake light today, and it is like new. Thanks Joel, another member that is a credit to this forum, and shows great club spirit. Cheers buddy, and I hope I can some day return the kindness to you. Ian

before i replaced the rear lights, the right indicator would blink rapidly as if a bulb was burnt, upon inspection the right rear bumper side light was off. left side ok. so on the weekend i replaced just the brake lights and installed the third brake light and its now rapidly blinking for left and right, ive checked all the lights and they light up. low beam, high beam, fogs, rear brake lights and all four indicators including the rear side bumper lights. cant figure out why its still blinking fast. any ideas?:huh:

My shagpile ones have just about had it (thank God, far too 80's). Quick question, will the LWB front mats fit a SWB?

as per title ive fitted the third brake light finally. and i was wondering is there a fitting difference, i know that the third brake light will fit all variations of the z32 but when was fitting it it only had one hole for the plastic clip!? which left me thinking wtf!! the strip has four clips and 4 screws to bolt down. i started thinking about drilling holes etc but ecventually after almost loosing hope and not fitting it i removed all 4 clips and bolted it place its in place and looks miles better but its not as sturdy bewteen the the end screw and middle screw where the brake light is. and there is defo a gap between the boot lid and the perspex stri…

what would cause a standard boost gauge to not work it obviously sits on 0 when the car is off but as soon as i turn the ignition on it goes a quarter way up and stays there even when i start the car and drive it doesn't seem to move one bit !! is an after market boost gauge better i so are these easy to fit ? Thanks Ben :)

Hello all! (from France!), After a year of really nice rides with the Red Z32, including track days and Spa Classic sessions http://www.300zx.co.uk/forums/showthread.php?166760-A-Z32-driven-to-France-for-a-new-or-continued-life-into-a-nice-home! http://www.300zx.co.uk/forums/showthread.php?170028-Z32TT-500-BHP-on-Spa-Classic-2013-25-amp-26-of-May I could not resist a second Z32 when the special dedicated track version was for sale end of last year http://www.300zx.co.uk/forums/showthread.php?173306-1991-High-Power-600bhp-Track-prepared-300zx-TT-for-Sale A one day drive to UK with the trailer and the car was now in Reims! The discovery of the car was…

help! where abouts is this tcu located?

I have removed the fuel tank from my car and will be getting powder coated soon I have washed the tank out a few times with soapy water and let it sock so but is there a better way to make the tank safe and fume free ?

Hello all! So over the winter I have noticed a slight crunch or notchyness (it is a word) going to 1st to second regardless of the rpm. It goes away a bit after an hour of driving once the old is warm presumably. Question is what could it be? - It is rare for the 2nd gear synchro to go. If I change down from 3rd to nd it is smooth. So if all in one movement I go from 1st, move into 3rd with clutch depressed, then put it into 2nd it is smooth as silk. I will put some MT90 in and see if that helps. Some guy on zcar mentioned that it could be clutch boost? does this mean anything to anyone? http://www.zcar.com/forum/12-90-96-tech-discussion-forum/16152…

Hi People, I know of a few on the forum using aftermarket diffs such quaife, kaaz and tomei ones! My question is what would be best for a fast road and a little track used Z ? Also what is prefered 1.5 or 2 way ?

as title says had about an hour window with no rain to get these fitted. even though the clear rear brake lights stood out and looked good, i personally always wanted a pair and i really like them! before and after

figured id start a new thread, as ive mentioned about my surprise find a fews days ago ive taken out the centre rear light panel and took apart one section to show what it was, i thought it would've been a simple led insert but it wasnt. from the pictures you'll be able to tell what was done and where, not much to it but the top lense had to be pushed in and glued in place and the edge has been cut away for the led board to fit. the backing cover also had been cut to allow room for the wires

Just wondering if it is possible to resistance check the air flow meter on these car's? :)