General Discussions - 300ZX Related

We have some beauties selling in UK as well. Valued at 10k. Bids over 4k already. https://www.copart.co.uk/lot/58663000 Place your bids

Hi guys and gals, greetings from Sunny and stinking bloody hot Brisbane Queensland Australia. I have a 1993 300zx Convertible, and i am having an issue with working out how to go about replacing a broken cable. The cable is the fuel door actuator cable, it has a broken piece of plastic which has caused it to stop working properly. One of the issues is Nissan Australia will not touch " imports " funny seeing how every Nissan they sell is bloody well imported, so i can't get help off them and the fact there are bugger all " Verts " in Aussie. So i am struggling to get parts or help. Is anyone selling said cable, and have any idea do i need to remove…

1996 300ZX Twin Turbo Commemorative Edition https://bringatrailer.com/listing/1996-nissan-300zx-twin-turbo-12/ One of the final 300 Z32s produced for the US Market in '96. They were given Commemoration certificates from Nissan along with VINs ending with 960XXX (001 to 300). This particular car has been OEM+'d. The video below is from Winding Road magazine showing 960300 coming off the line.

Afternoon all,can anyone recommend a good car cover for a car kept outside,mine is starting to split.I really do not want to buy anything Chinese if i can help it although they do seem a lot cheaper than other options.As usual any help appreciated.

Hi All Does anyone have a Part No. for either the filter/sump gasket kit or alternatively the two individual parts ? My gearbox has started playing up and my first thought is to service it and replace the oil. If it's shot then I'll be going down the conversion route I think. Many thanks

Hi all.... I am trying to find out if anyone knows the resistor and potentiometer modification details for a JDM speedo to Uk spec? I read you need to change them, but can’t find anything online about resister and potentiometer values to use?? The only link I found is broken... can anyone help please? thanks Russ

Afternoon all, got a question about pcv valves just bought 2 brand new oem valves decided to check them before fitting to make sure they opened end closed properly by applying mouth pressure to either end. One of them closes fully but the other does not seem to seal fully is this normal or is a faulty part ?

Hi can the fuel tank retaining straps be completely removed with the sub frame in place as why I've got the tank off I was going to clean them up an paint them thanks

Just had my Zed rear brake pads changed & antifreeze coolant done. with Xmas lights ?

So for the past week the car hasn't been giving out any heat, Its been off the road since beginning of October due to failing its MOT. I finally got a pass and started driving it again to find it wont blow hot air. This may have been a longer problem as I wouldn't have noticed it during the summer, it was definatly warm last winter. Using the service manual (http://www.300zx-twinturbo.com/cgi-bin/manual.cgi?list=ha&slide=125) I found the sensors 52 & 55 have open circuits leading me to diagnostic 6 & 12. I decided to start at 6 and got stuck, (http://www.300zx-twinturbo.com/cgi-bin/manual.cgi?list=ha&slide=142) I cant seem to find where the senso…

Hi guys Ive got the plenum off my car at the moment to replace the injectors, I’m going for the Nismo 740cc. Now my harness is in a really poor state and really could do with replacing. Obviously I’m going to go with the “95 harness but I don’t know if it’s a job that’s beyond me. It looks reasonable accessible now, has anyone got any experience with changing these at home. I know Jimmer can do it with the engine in but can us mortals manage it? Have we got a guide anywhere? Ive already got a late CAS unit to go in and I can buy the S2 PTU when I do pull the trigger. Is there anything else to consider? Cheers, Chris.

Two years ago I paid him £6k to build me a wide bodied 300zx with off road desert spec, I wanted to take it to the deserts of Spain to blast it. Anyway, Dasstech is no more and I cannot find him. I wont go into the details, but essentially, I'd like to find him again to see if he will do the right thing and build me the car I paid for. I saved for ages to be able to have the money to build that car. Before anyone writes back and tells me I'm a mug for giving anyone money up front, believe me I know I've been a mug, just he seemed really passionate about the project anyway. If any of you know him, please reach out to him for me. I'm not trying to get my money ba…

Hi People, First post for me... Can anyone advise if there is a company that will convert a convertible Auto transmission into a TT Manual Transmission. the next question would be what this is likely to cost? Many Thanks! Tom

Yokohama Advan Sienna Road Butler wheels-- any good for Z32?? thanks

Hi all please can anyone advise the correct bulb for my jdm front fog lights ? many thanks

Just received my order from CPZ two new fog light lenses and top and bottom oem radiator hoses. After 27 years I think new hoses would be a good thing and the fog light will be brighter.

Ok, Some of you have been enormously helpful with resolving the misfire of my car. Thank you! and shout out to Jim @PowerZed who supplied an ECU next day. Next problem is after having the car dry stored for a few years then had the MOT done. Took it to a different place where it failed. the car had done almost no miles since the previous. Below is the fail points. Ignore the light bulbs, fog light, tyres and number plate.... I wanted some advice. feel free to chime in with any feedback. I want to get the car back on the road cheaply for now as I am out of work due covid and sold our other cars. The main question I need to know is can I do this work mysel…

Hi All I Have tried too list a classified but it wont let me !! so here is a link to Ebay Listing if anyone may be interested i would prefer it to go to a club member or enthusiast so i know they would be serious buyer if you want to contact me direct email SIMONM5@SKY.COM and Reference this owners club please. NISSAN 300 ZX Z32 Item number: 224243348073

I know i am not allowed to advertise on here but would like some advice, I have listed mine on Ebay if anyone could have a look and let me know if i have got the ad about right !! lots of interest but ideally want it to go to someone who appreciates these and i serious about owning one, all comments and advice welcome. Thanks

Hello my fellow 300zx owners! I just recently bought 1996 NA edition and there are some things to figure out. I have no mechanical background whatsoever so please be gentle :D So I have done all the basic maintenance and some repairs including replacing knock sensor, spark plugs, engine belt, new braking system etc. Now the main problem is this rattling sound and losing power at around 2000-2500 rpm. Has anyone heard this kind of sound before and have any idea where to start looking? I cleared all the error codes with obd II bluetooth device so I attaced the picture of the codes before clearing. After clearing all the error codes the only code that popp…

Hi, I can now confirm our seasonal opening hours, as follows: Up to and inc 23rd: Normal Hours Christmas Eve: 9.00am – 1.00pm Christmas Day: Closed Boxing Day: Closed Sunday 27th December: Closed Monday28th December: Closed Tuesday 29th December: Normal Hours Wednesday 30th December: …

Can one of the moderators please help me. I’m trying to find my old journal I created on here over 10 years ago. its got some important info on my Zed build. Infact most of the info on my build. For example which brake discs I used for my custom brake setup. I’m not sure whether I used the r32 or r33 discs. I’ve got Porsche Calipers which I had fabricated to fit. I need new discs and need the info so I know which type of disc to buy.

Dont shout @ me if I've misased something! Trying to get through toi DTA Motorsport as they supplied my Conzult software many years ago but although a website, no working tel nos? Are they still going? Dave

https://rmsothebys.com/en/auctions/0620/open-roads--fall/lots/r0032-1990-nissan-fairlady-z-twin-turbo/998080