General Discussions - 300ZX Related

Hi folks, where do you get the clear side repeaters as ive had a look at some photos of zeds with them on but never seen any advertised anywhere????? mine look more yellow than orange now, yuk

Greetings, fellow carbon-based bipeds, if any of you who are coming to the Essex meet this Sunday have one of the ZCentre's OEM look-alike spoilers fitted, can you let me know. I've seen these fitted really well (e.g. Jeff TT's) but would like to do a side-by-side comparison. TIA - Gio

Z recently went into *****wood Nissan Tunbridge Wells (who I have been using for years) for manual gearbox oilchange. Next day from cold: difficult gear selection, horrible dry bearing noise, bearing rattle from box. After much deliberation (they almost changed the clutch)they put "a lighter oil "in, cured first two problems instantly , still rattles on cold start which wasn't there when it went in ... "oil was within Nissan parameters sir"...... What should the oil grade have been before I take legal advice???

..on this forum that does vinyl graphics for cars and such like? I'm sure I've spoken to you in the past but can't remember who you are. Sorry.

91 Uk Spec Auto 101K has been leaking what seemed to me a silicone type of substance. fairly clear but very viscous from center rear of the car over the last 2 days Thought it may have been a rear bushing as I had just done my front ones recently which seemed to seep the same type of substance. Dropped to mechanic who confirmed it was the rear difff seal had gone. Anyone know where to get these and how much. I would have thought the Diff oil would have been much darker?? Help appreciated Roy

Anyone want to PM one to me? Please im having a bad day!

Hi, can anyone tell me how i can line my drivers door up again, its probably dropped 1/2 - 3/4 of an inch, havnt got a manual! Had a look at hinge and cant work out if problem is there! D UK

Has anyone bought standard front shocks? If so how much were they? I have part numbers, just haven't got round to 'phoning Nissan yet. 56110-37P25 56111-37P25 Oh FYI rears are: 56210-33P25 and £34.90 + VAT each Tim

Does anyone know where I can get these from as one connector (left one of two, on front of engine - think its the cooling fan) is missing and the connector pulls of really easily. I did a search on the forum and found posts about making them out of paperclips or pianostrings (WTF?!). Can they be bought from Nissan? Has anyone bought any? Cheers Pete

Z spotted, blackish colour (needed a wash) with Carlos Fandango wheels. On the road out of Crowthorne in the woody bit at 2.15pm. Was it you? And yes, it was me.

Anyone got any tips or had experince with blowing in the down pipe area? Me and mechanic bud put the beast on a ramp , he reckons to locate the blow/hole will be a pig of a job due to the heat shield that surrounds he pipes. Its a single pipe 6" at the back if that makes any difference. Also does anyone recommend any where for mail order exhaust systems as I think the whole thing may be toast soon? Cheers Dil:rolleyes:

Did you get my email mate?

James, I meant to ask you about your zorst. I know it's form powerflow and I know you have it decatted. Who decatted it ?. Did you get it gutted or change to straight pipes ?. If so how much are we talking all in to replace and decat ?

Wazzzz uppp ! i blead the clutch on my TT about a month ago after the pedal got soft, i bleed the top, then the slave cylinder, i was able to get a better pedal by bleeding the slave by gravity rather than, opening & closing the vlave while the clutch pedal is operated, anyways i got a really solid pedal, now it is soft as sh*t again, still works but just not as good, i am going to bleed it again, am i bleeding the system corectly ? or any hints ? i was told that it works better if the front of the car is higher ? but havent tried it yet ...... Cheers ....... Scottieeee...

Sold my MR2 turbo and pick up my new Z on Sunday. Yipee Z is from a dealer and has 2 faults: gurgling noise from front wing behind dash on idle and slight rumble noise from rear drive shaft area at 4000rpm (noise only lasts a couple of seconds) Dealer says he will try to fix but cant be sure whether the faults can be located. Other than that the car is beautifull: Cherry Red, 5 spoke split rim alloys, tinted glass, full leather just in from Japan with 40000 miles If he cant fix the faults should I go ahead - the car drives really well - seems a lot faster than the MR2 Turbo Also the A/t light on dash doesnt work Car is 1991 H reg at £4500:rolleyes: :r…

I was driving back home from my mums at Leeds to Harrogate the other night when I came up behind some traffic on an A road. Remember my auto box only has 1st and 2nd gears at the moment ;) I blasted past the 4 or 5 cars in front at about 70mph almost at the red line in 2nd (!) and to my suprise the car behind me followed me then on the next straight roared past. It was a nice silver Supra with a huge HKS exhaust that sounded the biz! Just my luck - I've never come up against one on the road in 3 years and now my box is shagged! I kept up with him as the road is fairly twisty and you can't do much over 70 anyway and we blasted past loads of other cars until h…

hello, has anybody on his Z alloy-wheels in turbo-cup (porsche) - look ?? and can told me how it looks like on a photo? because i want to buy some wheels like that: http://www.weinkath-carwheels.de/index.php?rub=pro&rub_sub=fel http://www.artec-gmbh.de/html/framepage.html (a very nice american style to is:) http://www.lexaniwheel.com/ but not my style! thank you for your help and support

hello mr. Z-drivers and ladys:o nice to meet you.:) im a very interesting z32 driver in germany / frankfurt main.:D Who can told me how i can downlaod or save the 300zx manual, because when im by my car i have no internet -connection... Gives it PDF format or something? :confused: my email is: j.wallot@gmx.de

After tickering around with the Mrs Rover 416 SLi, the thought of "Aaarrgghh, fcuk it, it's only the Mrs Rover", so I disconnected the induction pipe that connects to the standard air filter box to see what difference it would make. OMG. How sexy is the sound of raw induction, nevermind the extra little bit of grunt. However, what I do want to know is, have any of you good people ever noticed any difference in induction noise after putting on after market induction kits? I dont mean performance wise but more to do with sound.

Spotted a Red 'bodykitted' Zed parked near TGI Fridays last night, same bodykit as the one that used to belong to 'Simon H'. Parked next to ya in me Micra, I hope you wern't to intimidated!!!:D Saw another Import Grey Zed between the bridges near Rivermead leasure centre at about 18:30 last night. Why is it I only see Zeds when I'm not in MY car !!!!!! Anyone here? Mike

Rare Z32 / Z33 Brochures. . They will go up in value Please check my buyer fedback comments to get an idea of their quality Cheers . . . Pistonbroke Paul

I will be buying a car soon and I want something that is cheap, reliable, good on gas yet powerful (i know, i cant have em all) Its either a first gen Honda CRX, which is a car I love and is great on gas, yet has has some snappy acceleration. However, the fact that only 2 people can sit in it just plain sux. Im strongly considering it though. The second option I'd have is a 1st or 2nd gen 300ZX. Not the nice ones, (91- ithink and up) but the ones before that. I really like the turbocharged version and man is it fast. But I dont want to be spedning $100s on repair and gas bills. What is a nonturbos acceleration from 0-60? Also, are 300zxs 2 seaters (i know the 2+2 is …

What is involved in converting the radio bandwidth setup so I can listen to the radio? I've got the original tape cassette/radio, I presume there's some sort of electrical work and parts required? Cheers Pete

Hi, I have been offered a new original Titanium blank at a reasonable price, only problem is the seller seems to think that I wont be able to get it cut? any ideas, has anybody done this before? D UK

Hey all, a little summary... Well I've had my zed a week now, and I'm still grinning :D . Beautiful car, comfortable, phenomenal acceleration but v quiet and smooth. Before yesterday I'd only driven in the rain and wet, so have been v careful around bends, roundabouts etc. In the dry the car feels v different, it really grips the roads and gives you confidence round bends I've never had before. The dry has let me test the acceleration from 1st gear - WOW! :cool: , in the wet the wheels span :rolleyes: when I tried. Still getting used to the looks from EVERYBODY, at petrol stations (3 visits :rolleyes: ) especially. Only this morning a group of kids stopped …