General Discussions - 300ZX Related

Spotted in Sittingbourne, drove into Tesco Express on Snipeshill and drove past my ratty beetle.

http://m.ebay.co.uk/itm/171432664231?nav=SEARCH The zed itself is an undervalued car. But some people are taking the piss and over pricing their cars dramatically. I have just sent the following message to the seller. Upfront? Definitely. True? Yes I do not know if you are aware of the prices of the Z32. But yours I'm afraid is way off the mark. You will be lucky to get £4000 for your car. With such a poor advert and lack of information if this car sells I will be very suprised. If you wish to reconsider your price then email me back. If not then good luck, I'm afraid you will need it. I feel this will ruffle a few feathers and I'm not out to cause an ar…

Hi Doing a headlight modification and noticed two of these tablets in each of my lights... Are they some sort of moisture repellant?

Morning all, My long suffering zed has been sat for 5 years after it overheated and cooked a head, in that time I had stripped down the existing engine to locate problem, once I realised how bad it was I sourced a 2nd hand engine off the forum, that's now in and hopefully ready to go. But it wont even turn over, Its got a decent battery on it, I've checked all the fuses, I can hear the fuel pump priming itself , It just wont turn over, The engine is free and rotates ok, The only issue I can think of would be the fact the clocks, dash etc are out of it because the matrix has been changed, would this cause an issue w…

Hopefully some of the zed experts can guide me here.. My zed has had a rattle since I got it, I'm out of ideas as too the cause now... It's running fine, but it rattles on overrun at the lower rev range, also low in revs under load it rattles up a low speed hill etc. Don't think it's the lifters, as one of my old zed's had them, and this is different, Had brand new timing belt, all pulleys and tensioners, no faults on consult, Thought it could have been vt springs, so just fitted new ones. Didn't seem weak, and we're getting oil, but Made little to no difference, I've checked the exhuast for leaks just in case, there's no heat shields…

Started thinking about traction control units- read some good things about the Racelogic Traction Control unit, but was wondering about other options. I remember reading about a unit a few years ago that patched into your ABS system and made it more of a posi-traction unit- if it detected wheelspin the controller would use the ABS actuator to bring that wheel into line with the others. So the Racelogic does it by cutting power, this other one did it by braking at the wheels. For race applications I guess the Racelogic would be better, but I think for crappy conditions (snow/ice/oil/rain) the other approach would be what I want. Problem is, I can't remember …

Ive got the drivers head off the other day and have now completely stripped it, including valve stem seals. I notice on some lifter there is a slight indent in the top, which would give me some tapping, but nothing like the sound it was making, there is nothing obvious in the head as to why it was making so much noise. The oil ways were pretty gunked and have cleaned them out and given them a blow through with the air compressor. Im going to put new stem seals, valves and cams off a spare head, to eliminate anything mechanical head wise, im hoping now it wasnt bottom end lol, but the clattering seemed high up, ie a head and i dont think piston slap would make tha…

I've had an on going issue with my zed now for some time. The issue is that it burns oil, to start with it grey wafts of it at idle and plumes of grey/blue between 2 and 3k it was honestly like a smoke machine, terrible. After a compression test revealing an average of 160 psi across all cylinders and no oil being ingested pre throttle body it was decided it was most likely the rear turbo oil seals, inspection revealed that a pool of oil was building up in the rear compressor housing then being pushed out when the airflow was sufficient. So these were rebuilt using staggered gap rear seals etc, the Pcv system was all replaced at this time too, with non oem Pcv valves and …

has anybody got an idiots guide to taking out the speedo cluster and replacement. is it a pain or easy.

Bought myself what I thought was a reasonable manual n/a Zed that needed a little tidying. Was pretty standard when I bought it, had a few little rust bubbles just coming through here and there but nothing serious and easily sortable. Straight away I went out and bought a set of staggered 18" alloys as other originals just look too small, this I when I noticed something wasn't right. When turning, the drivers side tyre was rubbing the arch liner, didn't think much of it at first as had this issue on my first Zed and it was caused by the arch liner not fitted correctly. After investigating a couple of weeks ago, I found that liner was fine and that the wheel was si…

seen this on ebay http://www.ebay.co.uk/itm/Nissan-300zx-Twin-Turbo-/201155681793?pt=Automobiles_UK&hash=item2ed5d01e01 really low mileage and uk model and heated driver and passenger seats I like that option lol though not keen on his whole these cars are only suited to those young at heart or mid life crisis ...

Ok so my headlights have no power at all, neither does my stereo and my aircon only come on when the car is in D. Im trying to rule out Body control module. Anyone else had this problem? Possible remedies?

I have fused my side lights! Front & rear not working! Is there a fuse? & where cos I cannot find side light fuse in both fuse boxes!

Still having zed woes........... I have done this test on my PTU http://forums.nicoclub.com/ptu-test-t505091.html mines not coming back with 14volts its actually coming back with 0.06volts, when I test battery its 12.45volts so meters OK I have Nissan breakers near me who have a PTU in for £30 but its from an NA would this be OK in a TT? Is it the same? Cheers

I just changed my JDM speedo cluster to another one and everything seems fine but my rev counter is idle at 2000 rpm rather than 1000 rpm. I went for a drive and still doesn't sit around 1000 rpm The new cluster has white dials in mph and think its a UK spec (could be wrong) but the speedo does match the speed in mph Can anyone help me as i have everything off and want to resolve this problem before putting it back together

Just went down local Nissan parts department (not the one I normally go to) and asked for a new oil filter and sump washer ... They gave me this stumpy looking thing, shorter than the ones I fit in the past. I questioned if it was genuinely compatible for a VG30DETT and the counter clerk said it was ... I'm a little suspicious though. Can anyone confirm it is suitable? Don't want to fit it and put new oil in only to find out it's going to give me pressure problems ... Box only lists compatible engines of under 1.6L and years 86-88. Cheers ~Tom

As an excuse to get out of going camping at the Greenbelt festival with the wife and kids this weekend, I decided to go on a road trip. I had planned to do this last year with my eldest daughter but couldn't afford it and as I now have my own company, decided to do it this year. Up until 10am this morning, was still undecided where to go a) east cost from the wash upwards b) North Yorkshire moors around Harkerside / Hawes / Richmond or c) north Welsh coast and then south. I decided on Wales so am now in a small hotel in Llandudno on the sea front. Took 5 hours to get here but once I left the main roads had a great time going through the country lanes gettin…

Hi All, I have the D2 Big brake kit on my Z, and I need some replacement discs (rotors to be correct!) as mine were flagged on the MOT. Does anyone know of a decent supplier ? I can find a few but they all include the bells, which I don't need or want to pay for :) Alternatively do any other manufactures rotors bolt up to these bells ? Thanks All, Regards, Simon

Hi, I thought i'd start a build thread as a log of the journey with my import Z. Afetr a horrible accident in my previous car i borrowed a budget amount for a run around, but as i was missing my previous pride and joy i was browsing piston heads to see what i could save for. As many people will understand the feeling when you click on to a site and see the car you've always dreamed of owning going for the same price you would puut done on a shitter. I was very sceptical but took the gamble. The car only had 43990 on the clock when i bought it with a few niggles. I got a history of previous mot's (some japanese so have no idea what they say lol) and was told the previou…

0.9bar of boost. Amazing!!!!!! These things are fast.

http://www.autoguide.com/auto-news/2014/08/nissans-new-z-car-will-sport-hybrid-power-targa-top.html Sent from my SM-G900F using Tapatalk

Not one I can do on short notice but I spotted a sign on the roadside last night at silly o'clock. It appears to be a family car show for Children in Need, last year raising £1.1m link provided. http://www.carfest.org/Content/Welcome-to-CarFest-South Some one might be interested and if yiu go let us know if it was good and it may be one to top on the Calander to arrange next year :)

Spotted this morning approaching a roundabout - I'm sure I've seen it on here before

Hi guys and gals. I have a problem and I'm not sure as to the cure. When idle the engine has started revving and falling like it's searching for fuel. Has anybody else had this? Does anybody know a cure or have an idea what is happening? All suggestions will be noted. Thanx

Ok. Bottom Speedo clock is off a UK 1991 TT. Top one is my 1991/2 Jap clock in kph. Trying to swap the two, but there are obvious differences in the connections...also, you may notice that the centre connection on mine only has 2x pairs of double contacts, whereas the UK one has 2x pairs of 3 contacts. Can anyone advise on fitting?